GE I R AND D/CHD-18/2023-24 COMPREHENSIVE REPAIR TO PERIMETER COMPOUND WALL OF TBRL, SECURITY FENCING, RETAINING WALL, DRAIN AND ALLIED WORKS IN ZONE-II TO VIII AT TBRL RANGE RAMGARH

Amount

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL.

Demolition of reinforced cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level).

Demolition of cement concrete concrete of any description and in any position

Material and labour for PCC (1:4:8) type D2 using 40mm graded aggregate in sub base/ mass concrete.

Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed

All as per serial item No 6.00 above but except bricks complete all as specified and directed.

Material and labour for walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

All as per serial item No 7.00 above but except stone complete all as specified and directed.

Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water. complete all as specified and directed.

Material and labour for rendering 15mm external using cement plaster in CM 1:4 on fair faces of brick/concrete vwork surfaces complete all as specified and directed.

Material and labour for flush pointing to random rubble masonry, uncoursed or brought upto courses in cement mortar 1:4. complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-0 using 20mm graded aggregate as in coping etc including necessary form work. complete all as specified and directed.

Material and labour in repair precast cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate for jallies 25mm thick set in cement mortar 1:4 including all moulding frame complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia confirming to Fe-410-S or Fe-410-0 complete all as specified and directed.

All as per serial item No 13.00 above but 8mm dia TMT bars.

Dismantling of existing chain link fencing of any mesh and size incl screw, nut and bolts etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Dismantling of wrought iron or MS work of any description.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion, embedded in concrete, brick work masonry and making good disturbed ground complete all as specified and directed..

All as per serial item No 17.00 above but embedded in natural ground etc.

Dismantling of GI barbed wire fencing fixed in RCC / steel fencing posts complete all as specified and directed.

Supply and fixing for mild steel iron posts and strut in fencing including cutting top to shape drilling holes, notching for wire etc flat iron fillet and similar work including all necessary drilling, bolting and revalting etc confirming to Fe-410-S complete all as specified and directed.

Supply only for chain link fencing pitch or wires 50mm made of MS galvanised wire confirming to IS-2712-2003 (GI wire confirming to IS 280-2006 having zinc coating as laid down in IS:4826 hot dipped galvanised coating on round steel wires or IS-12753 electro galvanised coating on round wires having tensile strength within 400 to 500 MPa of standard rails staining bolts etc incl provn of binding with mild steel wire not less than 0.9mm dia complete all as specified and directed.

Supply only PVC coating mild steel galvanised chain link fencing 3.15 mm dia wire (excluding thickness of PVC coating) mesh size 50mm x 50mm pitch 50mm. (Note : Thickness of PVC coating shall not less than 1mm and wire diameter 5.15mm thick incl PVC coating). complete all as specified and directed.

Fixing only new chain link fencing including line wires any mesh any size and to any type standards rails, straning bolts etc including provision of binding wire complete all as specified and directed

Supply and fixing for mild steel screw bolts (Machine made) 11 to 15mm dia with hexagonal or square heads at one end and screwed the other or screwed both ends to be fitted with washers and one hexagonal or square nut n exc 5 cm long complete all as specified and directed.

Material and labour for framed work as in doors or gates and framed grills made of ornamental purpose of amgle, sq bars or other sections including plate, rails braces with ornamental and fabricate etc complete drilled for fixing of steel seating including prepared for hanging, sliding bolt, handle etc confirming to Fe- 290 Gde E-165, complete all as specified and directed.

Supply and fixing for GI 2 standard barbed wire 2.24mm dia wire with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed, including the necessary clearing of vegetation (each line wire to be measured) complete all as specified and directed.

All as per serial item no 25.00 above but except barbed wire.

All as per serial item no 25.00 above but restraining, resecuring including making good staples only.

Supply and fixing in repairs for concertina coil of dia 450mm to 900mm and dia of wire 2.64mm having a core wire high carbon spacing steel of high tensile strength as per grade of IS-4454 (Pt-I) with a low carbon steel strip punched tape 19mm wide 0.5mm thick and series of knife edge sharp barbs/blades @ 25mm centre to centre punched all along the length on both the sides of strips at regular interval confirming to IS-513 complete all as specified and directed including clearing of vegetation etc. complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken, rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Material and labour for PCC type B-1 1:2:4 (20mm graded aggregate) as in foundation filling and mass concrete and like filling in fencing post. complete all as specified and directed.

Material and labour for reinforced cement concrete type B-1 1:2:4 (20mm graded aggregate) in precast post, fencing post, straining or terminal posts, struts etc for fencing average sectional area in exc 100 sqcm but n exc 250 sqcm with or without chamfered angles and flat splayed rounded or mitred tops as directed and fixed complete all as specified and directed.

Material and labour for two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces. complete all as specified and directed.

Material and labour for preparation of new untreated surfaces of steel of any description exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for providing 100mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises. complete all as specified and directed.

Machine pressed precast concrete interlocking coloured leather finished paver block supply and fixing in repair any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade laid over a layer of fine river sand watering and consolidating complete (Note :- sand will be measured paid for seperately under respected item supply only) complete all as specified and directed.

Supply only river bed fine sand for screed bed min 50mm thick for paving flooring. complete all as specified and directed.

A Providing and laying at or near ground level kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Material and labour for preparation of new concrete surfaces of any description, over 10cm width or girth and aplying two coats of synthetic enamel paint complete all as specified and directed

Material and labour for reinforced cement concrete (nominal mix) type B-1 (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed.

Material and labour for Formwork to faces of walls, retaining walls, abutments parapets and staircase railings and similar work with fair finished surfaces including attached pillasters, buttresses etc complete all as specified and directed.

Removing of vegitation growth, bushed including taking out from wall etc. and removing the rubbish n exc 50m complete all as specified and directed.

Material and labour for PCC 1:2:4 type B2 using 40 mm graded aggregate as in benching etc complete all as specified and directed.

Material and labour for 450mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars

Demolition of brickwork or stone/boulder masonry, laid dry

Material and labour for Boulder filling dry, hand packed tightly, as in wire crate apon vertical bunds with sloping face (covered by 4 mm dia galvanised steel wire 225x150mm mesh, made up in to cages, all as specified and directed.

shree balaji builders

Shivalik Enterprises

SONA BUILDERS