Loading
Loading…
Loading…
Tender Value
₹88.6 L
EMD Value
₹1.8 L
Closing Date
2 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
XEN/WS
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: i.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or ii.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or iii.One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work :- Any steel structure fabrication work.
3 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
For all the tenders having advertised cost of Rs. 10 Lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit (LC) arrangement.
I/ We have visited the works site and I / We am / are aware of the site conditions.
"Design, manufacturing, fabrication and commissioning of coach roof leakage testing plant along with shed structure in connection with Upgradation of infrastructure & augmentation of maintenance facilities in jodhpur workshop."
WS07of2025-26~NWR
WS07of2025-26
Open
Works - General
11 Months
Jodhpur, Rajasthan
₹0
₹1.8 L
2 Mar 2026
9 Feb 2026
16 Feb 2026
31 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 1200 | 286.85 | 3,44,220 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 1200 | 253.95 | 3,04,740 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 200 | 368.65 | 73,730 |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 1000 | 14.5 | 14,500 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 90 | 7,365.15 | 6,62,863.5 |
| 6 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 200 | 6,326.05 | 12,65,210 |
| 7 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 6,653.45 | 3,32,672.5 |
| 8 | Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 150 | 9,508.65 | 14,26,297.5 |
| 9 | Red sand stone | cum | 3 | 50,995 | 1,52,985 |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 3000 | 111.95 | 3,35,850 |
| 11 | Electric resistance or induction butt welded tubes | Kg | 25000 | 140.85 | 35,21,250 |
| 12 | Providing and fixing bolts including nuts and washers complete. | Kg | 100 | 140.15 | 14,015 |
| 13 | 110 mm diameter | Metre | 50 | 319.75 | 15,987.5 |
| 14 | 110 mm Shoe | Each | 10 | 115.95 | 1,159.5 |
| 15 | 110 mm | Each | 30 | 309.5 | 9,285 |
| 16 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 300 | 671.55 | 2,01,465 |
| 17 | Ridges plain (500 - 600mm) | Metre | 30 | 450.6 | 13,518 |
| 18 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). | Sqm | 300 | 442.75 | 1,32,825 |
| 19 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 300 | 158.95 | 47,685 |
| 20 | Two or more coats on new work | Sqm | 300 | 131.45 | 39,435 |
| 21 | Stone screening 13.2 mm nominal size (Type A) | cum | 10 | 1,865 | 18,650 |
| 22 | Red bajri | cum | 10 | 1,557.25 | 15,572.5 |
| 23 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer- in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). | cum | 200 | 8,277.55 | 16,55,510 |
| 24 | 25 mm nominal dia Pipes | Metre | 775 | 370.65 | 2,87,253.75 |
| 25 | 50 mm nominal dia Pipes | Metre | 168 | 811.85 | 1,36,390.8 |
| 26 | 25 to 40 mm nominal bore | Each | 2 | 757.1 | 1,514.2 |
| 27 | 50 to 80 mm nominal bore | Each | 1 | 1,513.7 | 1,513.7 |
| 28 | 50 mm nominal bore | Each | 2 | 878.25 | 1,756.5 |
| 29 | 25 mm nominal bore | Each | 8 | 399.15 | 3,193.2 |
| 30 | 25 mm nominal bore | Each | 8 | 789.95 | 6,319.6 |
| 31 | 50 mm nominal bore | Each | 2 | 1,280.3 | 2,560.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ScopeofWork-compressed.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .