Loading…
Loading…
Tender Value
₹20.0 L
EMD Value
₹40,000
Closing Date
24 Aug 2026, 11:00 amDue tomorrow
EE (Elect), FTR HQ M and C
FTR HQ M and C
Replacement of overhead line to underground cable from 171 Bn SOs mess to Ftr SOs Mess at BSF Campus Masimpur under Ftr HQ BSF M and C Silchar
2026_BSF_921712_1
12/Elect/M and C/2026-27
Open Tender
Electrical Works
Percentage
BSF Campus Masimpur
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹40,000
Yes
14 Aug 2026
14 Aug 2026
25 Aug 2026
14 Aug 2026
24 Aug 2026
14 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SITC of water protected outdoor type compartmentalized hut type double door cubical panel of size 500 mm depth suitable for 415 Volt, 3 phases, 50 Hz made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. The panel having 400A/415V 4 strip aluminum bus bar- 1 sets duly PVC sleeved, separate detachable gland plate, angle iron base frame made out of 65 mmx 65 mm x 6 mm angle iron of suitable size of the panel {minimum height 2 meter (one meter below the ground level and one meter above the Ground level), hinged door, with locking arrangement for inside/outside separately, earth bar/stud, i/c grouting the legs in 1:3:6 cement concrete foundation and brick work around the three sides of panel to supporting complete as required with following instruments mounted on it. (Panel should be as per design & drawing approved by Engg in charge) | - | Sqmtr | 62,076 | - |
| 2.1 | Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (I) 125 Amp, 36KA, FPMCCB | - | Each | 8,644 | - |
| 2.2 | Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (II) 100 Amp, 30KA, FPMCCB | - | Each | 8,127 | - |
| 3 | Supplying, installation, testing and commissioning of factory made, outdoor type panel size 800 mm x 600 mm x 300 mm deep, having prepaint treatment, painted with appproved siemen's grey powder coated paint, 200 aps, 4 strip bus bar insulated alluminium busbar 2 set and to accommodate following accessories, front opening, earthing, locking arrangement and 415V, 63 Amps, 16 KA-2 nos Four pole MCCB etc. complete as required and made of 1.6 mm thick CRCA sheet and powder painted including and panel is approved by CPRI, as per direction of Engineeer-in-charge. | - | Each | 28,907 | - |
| 4 | Supplying and laying of 3.5 x 35 sq mm armuoured -PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade in the existing RCC/ HUME/ METAL pipe as required | - | Mtr | 652 | - |
| 5 | Supplying and laying of 3.5 x 120 sq mm armuoured -PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade in the existing RCC/ HUME/ METAL pipe as required | - | Mtr | 1,842 | - |
| 6 | Supplying and laying of 3.5 x 300 sq mm armuoured -PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade in the existing RCC/ HUME/ METAL pipe as required. make Finolex/KEI/havells/equivalent. | - | Mtr | 4,234 | - |
| 7 | Earthing with GI earth pipe 4.5 mtr long x 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc( with charcoal or coke and salt ) complete as required. | - | Set | 7,658 | - |
| 8 | Providing and fixing 6SWG dia GI wire on surface or in recess for lop earthing alongwith the existing surface/recessed conduit/submain wiring/cable as required in 15 dia GI pipe from earth electrode as required | - | Mtr | 313 | - |
| 9.1 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (i) 3½ X 35 sq. mm (32mm) | - | Each | 437 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.74 MB
NIT.pdf
Tender Documents • 1.73 MB
BOQ_968589.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].