SPL REPAIR TO PERIMETER FENCING AT A A BANAR UNDER GE BANAR

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good distrubed ground complete all as specified.

Dismantling of damaged Barbed wire of any description and in any position removal from site of work complete all as specified.

M&L for refixing and straighting the barbed wire dismantled against item No -2 all as above as complete all as specified.

Excavating in post holes (or similar holes) each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified.

M & L for PCC (1:3:6) type C2 by using 40 mm well graded stone aggregate as in foundation, post, filling and mass concrete complete all as specified.

M&L cement concrete type B-2 1:2:4 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) including shuttering complete all as specified.

M & L for rolled steel section as in posts, struts and staples in fencing including cutting to top to shape (swan neck) as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting welding etc and similar work confirming to Fe-290 Gde-165 complete all as specified.

S & F Barbed wire, Galvanized steel, 2 strand 2.24 mm dia barbed with 2mm dia bars at 75 mm spacing straining and type of standard rails, straining bolt, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc ( each line wire to be measured) complete all as specified.

M & L for two coats of synthetic enamalled paint over one coat of red oxide primer on new steel surfaces exc 100mm width or girth, including preparation of the surface complete all as specified.

M & L for two coats of bituminous paint on new steel surfaces exc 100mm width or girth, including preparation of new steel surface complete all as specified.

Dismantling of damaged existing chain link fencing of any description and in any position removal from site of work complete all as specified.

Supply only Chain link MS galvanised fencing, any size or type to match with existing fencing complete all as specified.

Fixing only chain link fencing including line wires/ MS round bar (Any numbers), any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire (Note. Supply of flat iron, MS round bar & chain link shall be measured and paid seperately under supply only).

Supply only MS rounded bars Fe-290 (Gde-165) 10 mm dia and over cut to length and bend to shape as required as in tie bars, secured with nut, bolt and washers complete all as specified.

S & F 12 mm dia MS screw bolts any size (machine made) with hexagonal or square heads at one end and screwed the other ends, fitted with washer and one one hexagonal nut exc 5cm long but n exc 10cm complete all as specified.

POOJA CONSTRUCTION (BID ID -3117767)

NISHA CONSTRUCTIONS (BID ID -3104078)

BHAKAR RAM AND SONS (BID ID -3128161)