Expansion of Visitor Amenities in Padmanabhapuram Palace Museum 2025-26 . Feeding Cabin and Footwear Shed (Re-tender)

Appendix A : Feeding Cabin Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood.

Supplying and fixing marine plywood 12 mm thick fixing the wooden frame with iron screws / wooden adhesive etc. complete as per the direction of the departmental officer at site.

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

Providing and fixing 100x58x1.90 mm, IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete

Providing and fixing 150x10 mm bright finished brass tower bolts (barrel type) with necessary screws etc. complete

Providing and fixing 100 mm bright finished brass handles with screws etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing white vitreous China pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 15 mm CP Brass Pillar tap including cost and labour charges etc. complete.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 15 mm nominal bore.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing rectangular shape 453x357 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.

Providing and fixing 20 mm dia 12 Kgf/cm2 PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc.

Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall.

Providing and fixing 50 mm dia 6 kgf/cm2PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.

Appendix B : Footwear shed Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challis, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Hire and labour charges for providing putting up view cutter with green shade net over the scaffolding already provided including hire charges for shade net and labour charges etc. complete.

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level:.

Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Supplying and fixing granite ornamental stone base of size 32 cm 10 cm height including all cost conveyance and fixing charges.

Providing reaper of size 50 x 25 mm with wire nails including charges for sawing the scantling with required size and shape as per the direction of the Engineer in charge.

Protective coating to the wooden roof members with CNS (Cashew oil) mixed with diesel at 1:1 (1 Cashew oil :1 diesel) including cost of materials and labour charges etc. complete.

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern.

Providing cement mortar bordering to tiled roof, about 65cm2 in cross section area and to fix ridge tiles using cement mortar 1:2 (1 cement : 2 coarse sand) including cost and labour charges etc. complete.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.