Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 CrAdmitted-Finance OM VIHAR COLONY DELHI ROAD ROORKEE | ₹5.0 Cr | L1 | Admitted-Finance |
| 2 | Not Admitted-Fee/PreQual/Technical 825 GANDHI CHOWK RANIKHET 263645 DISTRICT ALMORA | RANIKHET | ALMORA | UTTARAKHAND | 263645 | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 3 | Rejected-Technical HOUSE NO 927 1 A NEW ADARSH NAGAR OPPOSITE GANPATI BANQUET HALL ROORKEE | - | - | Rejected-Technical Disqualified |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Rejected-Technical | - | - | Rejected-Technical Disqualified |
| Sl No | Description | Qty | Unit | RAVI CONSTRUCTION CO L1 |
|---|---|---|---|---|
| 1.00Replacement of bre conductor & Laying of A.B. Cable ( Supply ) | ||||
| 1.01 | Steel Tubular Poles 8.5 meter long SP-21 with pole cap & M.S. Base plate ( As per specification) | 27 | Nos. | - |
| 1.02 | P.C.C. Pole ( 8.5 Mtr. Long )( As per specification) | 110 | Nos. | - |
| 1.03 | L.T. A.B. Cable size 3x95+1x70sq.mm ( As per specification) | 75 | KM. | - |
| 1.04 | L.T. A.B. Cable size 3x120+1x95sq.mm ( As per specification) | 6 | KM. | - |
| 1.05 | L.T. P.V.C. Cable (4x10sq.mm) | 14.7 | KM. | - |
| 1.06 | L.T. P.V.C. Cable (Single Core ) | 4.3 | KM. | - |
| 1.07 | Galvanised Stay Set 16x1800 sq.mm. including 7/10swg. Stay wire. The minimim guarantee of finished 16x1800sq.mm. stay sets shall be 5.8 Kg. equivalent ISS as per drawing & specification for supporting poles of overhead line . | 125 | Nos. | - |
| 1.08 | Supply of Dead End Clamps with I Hook. ( As per drawing attached ) & as per UPCL specification. | 481 | Nos. | - |
| 1.09 | Supply of Distribution Box Clamps with Nut & bolts. ( As per drawing attached )& as per UPCL specification. | 3,440 | Nos. | - |
Tender Value
₹5.5 Cr
EMD Value
₹11.1 L
Closing Date
5 Feb 2020, 3:00 pmClosed
Superintending Engineer
SE,EDC,Rudrapur
Replacement of bare conductor by A.B. Cable under 33/11KV.S/s, Majrashila and Chinimill under EDD,Rudrapur on Turnkey basis.
2019_UPCL3_21892_1
EDC(USN)39/2019-20
Open Tender
Electrical Works
Item Rate
180 days
Gadarpur
Pl. refer tender documents.
3 documents required · 3 mandatory
₹23,600
SE,EDC,Rudrapur
₹11.1 L
25 Feb 2020
30 Dec 2019
6 Feb 2020
30 Dec 2019
5 Feb 2020
30 Dec 2019
Amount
Replacement of bre conductor & Laying of A.B. Cable ( Supply )
Steel Tubular Poles 8.5 meter long SP-21 with pole cap & M.S. Base plate ( As per specification)
P.C.C. Pole ( 8.5 Mtr. Long )( As per specification)
L.T. A.B. Cable size 3x95+1x70sq.mm ( As per specification)
L.T. A.B. Cable size 3x120+1x95sq.mm ( As per specification)
L.T. P.V.C. Cable (4x10sq.mm)
L.T. P.V.C. Cable (Single Core )
Galvanised Stay Set 16x1800 sq.mm. including 7/10swg. Stay wire. The minimim guarantee of finished 16x1800sq.mm. stay sets shall be 5.8 Kg. equivalent ISS as per drawing & specification for supporting poles of overhead line .
Supply of Dead End Clamps with I Hook. ( As per drawing attached ) & as per UPCL specification.
Supply of Distribution Box Clamps with Nut & bolts. ( As per drawing attached )& as per UPCL specification.
Supply of Suspension Clamp with I hook.with Nut & bolts. ( As per drawing attached )& as per UPCL specification.
Supply of P.C.C. Pole clamps with Nut & bolts. ( As per drawing attached )& as per UPCL specification.
Supply of shere head type insulation peering connectors jumpering for junpering to line to linejumpering/tapping 70-70sq.mm. ( As per drawing attached )& as per UPCL specification.
Supply of shere head type insulation peering connectors jumpering for junpering to line to linejumpering/tapping 70-35sq.mm. ( As per drawing attached )& as per UPCL specification.
Supply of shere head type insulation peering connectors jumpering for junpering to line to linejumpering/tapping 35-35sq.mm. ( As per drawing attached )& as per UPCL specification.
Supply of shere head type insulation peering connectors suitable for energiging L.T. Distribution boxes. 70-16 sq.mm
Supply of shere head type insulation peering connectors suitable for energiging L.T. Distribution boxes. 35-16 sq.mm
Supply of L.T. Bare Neutral connectors P.G. clamp, made of Aluminium 50sq.mm. to 50 sq.mm double bolt( For line to line jumpering ) ( As per drawing attached )& as per UPCL specification.
Supply of L.T. Bare Neutral connectors P.G. clamp, made of Aluminium 25sq.mm. to 25 sq.mm double bolt( For line to line jumppering ) ( As per drawing attached )& as per UPCL specification.
Supply of mid span insulated jointing sleevers subitable for LT ABC as per UPCL Specification.
Supply of heal shink type and caps suitable for LT.ACB as per UPCL Specification.
Supply of SMC Three Phase L.T. Distributin box with inbuilt panel lock, Al. Bus Bar RYB 25x6mm. Al. Busbar N.40x6mm( Sintex madee or other ISI Mrk reputed company ( As per drawing attached )
Supply of SMC Single Phase L.T. Distributin box with inbuilt panel lock,( Sintex madee or other ISI Mrk reputed company ( As per drawing attached )
Supply of M.s. Clamps L.T. Clamps for SP-21 with Nut & Bolts. without cracks & burrs. Painted by primers.
Supply of M.s. Clamps L.T. Clamps for SP-10with Nut & Bolts. without cracks & burrs. Painted by primers.
Supply of M.s. Clamps L.T. Clamps for SP-55 with Nut & Bolts. without cracks & burrs. Painted by primers.
Supply of M.s. Clamps L.T. Clamps for SP-23 with Nut & Bolts. without cracks & burrs. Painted by primers.
Supply of 1x50sq,mm. XLPE including Al. Cable .
Supply of M.S.. Stay Clamps for P.C.C. Pole,SP-21, SP-10, SP-33,SP-23made of M.S. flate size 50x6mm. with 2 Nos. Nut & Bolts ( size 65x16mm) for Suspension Clamps assemble without cracks & burrs. Painted by primers.
Supply of Special Type holding clamps for JI hooks with nuts & bolt.
Supply of 35sq.mm. All. Lugs.
Replacement of bre conductor & Laying of A.B. Cable ( Work )
Dismantling of old ACSR Conductor( Dog/Weasel)( L.T. Line) including Re- rolling back its conductor, wire, clamp, insulator etc .including stacking and transportation of material to the UPCL stores : 3 phase 4 wire.2 phase 3 wire.1 phase 2. wire.
Carrying the material from dump store to site of work(Approx dis. 01-02KM)ST. Pole SP-21
Carrying the material from dump store to site of work(Approx dis. 01-02KM)P.C.C. Pole.
Carrying the material from dump store to site of work(Approx dis. 01-02KM)Cable & other material.
Erection & grouting of P.C.C. Pole8.5 Mtr. Long ( 180 kg. W/L )for reducing span of LT, ABC line including digging of pits 0.6x0.9x2.15 Mtr.grouting stone pad and making kiciking block in E&B And with fitting of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge : Single Pole
Erection & grouting of STP SP-21 for reducing span of LT, ABC line including digging of pits 0.6x0.9x2.15 Mtr.grouting stone pad and making kiciking block in E&B And with fitting of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge :
Erection of stay set 16x1800mm. pit size 0.6x0.9x1.2 Mtr. as per specifications including 7/16SWG stay wire, binding, nozzling of stay with bcking filling of pit with CC 1:4:8 in bottom to pit in size 0.60.complete work stay set will be provided by UPCL.
Laying , Stringing and sagging of AB cable size (3x120+ 1x95)
Laying , Stringing and sagging of AB cable size (3x95+ 1x70)
Laying of LT, PVC Cable 4x10sq.mm.
Fixing of Dead End Clamps with I Hook. ( As per drawing attached ) & as per UPCL specification.
Fixing of of Distribution Box Clamps with Nut & bolts. ( As per drawing attached )& as per UPCL specification.
Fixing of Suspension Clamp with I hook.with Nut & bolts. ( As per drawing attached )& as per UPCL specification.
Fixing of P.C.C. Pole clamps with Nut & bolts. ( As per drawing attached )& as per UPCL specification.
Fixing of shere head type insulation peering connectors jumpering for junpering to line to linejumpering/tapping 70-70sq.mm. ( As per drawing attached )& as per UPCL specification.
Fixing of shere head type insulation peering connectors jumpering for junpering to line to linejumpering/tapping 70-35sq.mm. ( As per drawing attached )& as per UPCL specification.
Fixing of shere head type insulation peering connectors jumpering for junpering to line to linejumpering/tapping 35-35sq.mm. ( As per drawing attached )& as per UPCL specification.
Fixing of shere head type insulation peering connectors suitable for energiging L.T. Distribution boxes. 70-16 sq.mm
Fixing of shere head type insulation peering connectors suitable for energiging L.T. Distribution boxes. 35-16 sq.mm
Fixing of L.T. Bare Neutral connectors P.G. clamp, made of Aluminium 50sq.mm. to 50 sq.mm double bolt( For line to line jumpering ) ( As per drawing attached )& as per UPCL specification.
Fixing of L.T. Bare Neutral connectors P.G. clamp, made of Aluminium 25sq.mm. to 25 sq.mm double bolt( For line to line jumppering ) ( As per drawing attached )& as per UPCL specification.
Errection of mid span insulated jointing sleevers subitable for LT ABC as per UPCL Specification.
Fixing of heal shink type and caps suitable for LT.ACB as per UPCL Specification.
Errection of SMC Three Phase L.T. Distributin box with inbuilt panel lock, Al. Bus Bar RYB 25x6mm. Al. Busbar N.40x6mm( Sintex madee or other ISI Mrk reputed company
Errection of SMC Single Phase L.T. Distributin box with inbuilt panel lock,( Sintex madee or other ISI Mrk reputed company
Fixing of M.s. Clamps L.T. Clamps for SP-21 with Nut & Bolts. without cracks & burrs. Painted by primers.
Fixing of M.s. Clamps L.T. Clamps for SP-10with Nut & Bolts. without cracks & burrs. Painted by primers.
Fixing of M.s. Clamps L.T. Clamps for SP-55 with Nut & Bolts. without cracks & burrs. Painted by primers.
Fixing of M.s. Clamps L.T. Clamps for SP-23 with Nut & Bolts. without cracks & burrs. Painted by primers.
Fixing of 1x50sq,mm. XLPE including Al. Cable .
Fixing of M.S.. Stay Clamps for P.C.C. Pole,SP-21, SP-10, SP-33,SP-23made of M.S. flate size 50x6mm. with 2 Nos. Nut & Bolts ( size 65x16mm) for Suspension Clamps assemble without cracks & burrs. Painted by primers.
Fixing of Special Type holding clamps for JI hooks with nuts & bolt.
Fixing o 35sq.mm. All. Lugs.
Straighting of tillted S.T. Pole with grouting and muffing.
Removal of Previous connections & Re-connection of Single Phase / Three Phase L.T. consumer service connection and shifting the mterers outside of the premises.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.64 MB
FormAandB.pdf
Other Document • 0.67 MB
BOQ_26113.xls
BOQ • 0.31 MB
tenderdocument39.pdf
Tender Documents • 1.82 MB
drawing39.pdf
Additional Documents • 3.47 MB
technicalspecification39.pdf
Tender Documents • 1.24 MB
technicalspecification.pdf
Tender Documents • 1.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .