Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-AOC | ₹4.3 L | L1 | Accepted-AOC L1 ACCEPTED and approved by committee.Agreement executed. |
| 2 | L2₹4.6 L+₹32,045.68 (7.52%)Rejected-Finance | ₹4.6 L+₹32,045.68 (7.52%) | L2 | Rejected-Finance L1 ACCEPTED and approved by committee. |
| 3 | L3₹4.7 L+₹46,110.06 (10.8%)Rejected-Finance | ₹4.7 L+₹46,110.06 (10.8%) | L3 | Rejected-Finance L1 ACCEPTED and approved by committee. |
| 4 | L4₹4.8 L+₹55,684.27 (13.1%)Rejected-Finance | ₹4.8 L+₹55,684.27 (13.1%) | L4 | Rejected-Finance L1 ACCEPTED and approved by committee. |
Tender Value
₹5.1 L
EMD Value
₹12,710
Closing Date
23 Jan 2024, 5:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER,LSGD- LIDEW SECTION, KODAKARA
Pro.No.321 2023-24 Construction of MCF above shopping complex in Kodakara GP
2024_LSGD_644841_8
4/ET/AE/LIDEW/KDA/2023-24
Open Tender
Civil Works - Buildings
Item Rate
180 days
KODAKARA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,125
₹12,710
Yes
10 Aug 2024
16 Jan 2024
25 Jan 2024
16 Jan 2024
23 Jan 2024
16 Jan 2024
Amount
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD243460/2023-2024:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
OD243458/2023-2024:SUPPLYING AND FIXING 150 mm SQUARE PVC HALF CUT SECTIONS WITH BRACKETS AT THE END OF THE SHEET OR TILED ROOF FOR RAINWATER COLLECTION INCLUDING ALL COST OF MATERIAL, LABOUR, CONVEYANCE CHARGE ETC COMPLETE
OD243685/2023-2024:Ridge capping with pre painted galvanised steel sheets 0.5 mm thick 60 cm wide including all cost and material conveyance labour charges etc. complete.
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
GINSON GT
SIJON NELLIPPILLY
Laiju V.P.
Bidder Name
GINSON GT
SIJON NELLIPPILLY
Laiju V.P.
JIJI K S
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_987070.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .