M/T on Habban Dhamoon road km 0/00 to 21/465 (SH P/L Soling G-I in Km 9/150 to 10/150 and Construction of 900 mm dia Hume pipe culvert along with both side wing wall at RD 8/0. Under MNp

Amount

Preparation of sub grade by dressing to camber (Earth work for the cutting involved for sub-grade to be paid for separately) depending upon the classification of soil completed as per HP.PWD. Specification and as per direction of the Engineer-in Charge, including carriage of all labour equipments and materials to various locations through all modes of transportation

Consolidation of sub-grade with road roller including making good the undulation etc. with earth or quarry soil etc. and rerolling the sub-grade completed as per HP.PWD. Specification and as per direction of the Engineer-in Charge, including carriage of all labour equipments and materials to various locations through all modes of transportation.

Providing laying, spreading and compacting stone aggregate of specific size to water bond macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 KN (Eighty to One Hundred) static roller in stage to proper grade and camber, applying and brooming, crushable screening to fill-up the interstice of course aggregate, watering and compacting to the required density Grading 1 as per technical Specification clause 405 (Clause Four Hundred Five) by Manual Means .

Construction of unlined surface drain of average cross-sectional area 0.2 sqm in ordinary rock to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307. Excavated material to be used in embankment at site. by mechanical means as per H.P.PWD. specsification,

Earth work in excavations for structure as per drawing and technical specifications clause 305.1 (Clause ThreeHundred Five point One) including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material in all leads and lifts to the entire satisfaction as per direction of Engineer-in- Charge.

Providing and laying concrete for plain/reinforced concrete in open foundations complete as par drawings and technical specifications C- 802, 803, 1202 & 1203(Clause - Eight hundred Two, Eight hundred Three, One thousand Two hundred Two and One thousand Two hundred Three) 1:4:8. (One Cement : Four Sand : Eight graded stone) aggregate 25 mm nominal size and curing complete including the cost of form work and carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Providing and laying Plain Cement Concrete 1:3:6(one cement: three sand: six graded hard stone aggregate 20mm(twenty) millimeter)nominal size} and curing complete including the cost of formwork for plain/reinforcemed concrete as per drawing and HP PWD techinical specifications i/c carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in- Charge.

Laying reinforced cement concrete 900 mm (Nine Hundred millimeter)diameter pipe class NP-2( Non Presseure- Two), including jointing for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2(one cement: two sand) including back filling but excluding excavations, protection works, concrete and masonry works in head walls and parapets as per drawings and technical specifications C - 1108. all modes of transportation in all leads and lifts to the entire satisfaction of the Engineer-in-Charge,

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm (One Hundred ) dia AC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 (Clause - Six hundred Fourteen, Seven hundred Nine, One thousand Two hundred Four point Three point Seven) ),including hauling /carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in- Charge

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 in granular material and as per direction of the Engineer-in Charge, including carriage of all labour equipments and materials to various locations through all modes of transportation in all leads and lifts to the entire satisfaction of the Engineer-in-Charge.

Virender Thakur

Jagdish Chand

Rajat thakur