SDRF PyIP Repair of shutters in Mahe branch Canal

Amount

SCHEME 1-Dismantling and removing the existing Mahe branch distributory shutter ,hoisting mechanisms and supply fabrication and fixing of MS and SS embedded parts for new MS shutter -at Chainage: 15.100km main canal

od26732/2020_2021/MH : Dismantling and removing the existing canal shutter (medium size) & hoist unit and convey the scrap materials to nearest custodian office. Cost includes of labours, hire charges of tools, conveyance, loading and unloading charges etc.complete

od26743/2020_2021/MH : Chipping the groove for fixing embedded parts of shutter including cost of materials, conveyance , hire charge, labour and other incidential charges etc complete

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od26867/2020_2021/MH : Fabrication and erection of Embedded parts for canal shutters ( up to 2 tonne weight ) and accessories asper approved specifications, drawings and directions of deptl officer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of materialalready supplied

od26868/2020_2021/MH : Fabrication,Supply, erection and assembling in correct position and alignment by welding SSEmbedded parts in 304L Grade like roller track, seal track,seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery forplaning, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

od26870/2020_2021/MH : Supply and fixing of MS bolt and nuts

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

SCHEME 2- Supply of MS materials and rollers for Mahe branch distributory shutter .at Chainage: 15.100km of Main canal

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od26742/2020_2021/MH : Supplying and fixing cast steel thrust roller assembly having 120mm Dia, 50mm tread width, SS(304) shaft and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

od26744/2020_2021/MH : Supply and fixing MS bolt and nuts

SCHEME-3 Fabrication of Mahe branch distributory shutter ,supply and fixing of rubber seals,supply of EN-8 shaft, painting and erection of shutter-at Chainage: 15.100km main canal

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

od26908/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Plat form and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

od26914/2020_2021/MH : Providing EN-8 Screw rod 7.5 tonne capacity 4.00m lift screw hoist having one number of EN-8 screw shaft having lifting speed of around 5cm /min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od27207/2020_2021/MH : Erection of canal shutter (upto 2 T weight) / hoist bridge/ platform including handrails, ladder etc. for the same including alignment correcting and setting complete including cost of all machinery, labour all incidental and conveyance charges, leasd and lift charges etc complete but excluding cost of materials already supplied

SCHEME 4- Supply,fabrication painting erection of hoisting and providing lifting worm gear mechanism for Mahe Distributory Shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od26734/2020_2021/MH : Supply and fixing of MS bolt and nuts

od26735/2020_2021/MH : Supply of GI pipe

od26739/2020_2021/MH : Providing of Double worm and pinion having a lifting speed of around 5.00 cm/min for hand operation /manual operation including cost of all materials,labour ,hire charges and conveyance

od27232/2020_2021/MH : Providing shaft to connect two worm reducers (already supplied)of the operatingmechanism including cost of MS shaft,coupling flange ,keys,nut and bots,rubber packing etc.data for 1 shutter

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od26747/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Plat form and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

od27224/2020_2021/MH : Erection of canal shutter (upto 2 T weight) / hoist bridge/ platform including handrails, ladder etc. for the same including alignment correcting and setting complete including cost of all machinery, labour all incidental and conveyance charges, leasd and lift charges etc complete but excluding cost of materials already supplied

SCHEME 5 -SUPPLY,FABRICATION PAINTING AND ERECTION OF CANAL SHUTTERS -MAHE BRANCH (3 Nos. at CH:2.076,CH:6.20,CH:7.75

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od26908/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Plat form and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

13.9.2 : Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

od27205/2020_2021/MH : Providing EN-8 Screw rod with 1 umber of EN-8 of screw shaft , hand operation including cost of all materials, labour, hire charges and conveyance

od27119/2020_2021/MH : Providing base and nut arrangement for hoisting the shutter including the cost of all materials labour etc complete

od27211/2020_2021/MH : Erection of canal shutter (upto 2 T weight) / hoist bridge/ platform including handrails, ladder etc. for the same including alignment correcting and setting complete including cost of all machinery, labour all incidental and conveyance charges, leasd and lift charges etc complete but excluding cost of materials already supplied

SHEME-6 Replacing the existing damaged shutter and fixing Embeded part for new shutterat CH:20.500 of Mahe branch canal

od27120/2020_2021/MH : Dismantling and removing the existing canal shutter (medium size) & hoist unit and convey the scrap materials to nearest custodian office. Cost includes of labours, hire charges of tools, conveyance, loading and unloading charges etc.complete

od27121/2020_2021/MH : Chipping the groove for fixing embedded parts of shutter including cost of materials, conveyance , hire charge, labour and other incidential charges etc complete

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od27122/2020_2021/MH : Fabrication and erection of Embedded parts for canal shutters ( up to 2 tonne weight ) and accessories asper approved specifications, drawings and directions of deptl officer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of materialalready supplied

od27123/2020_2021/MH : Fabrication,Supply, erection and assembling in correct position and alignment by welding SSEmbedded parts in 304L Grade like roller track, seal track,seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery forplaning, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

od27124/2020_2021/MH : Supply and fixing of MS bolt and nuts

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

SHEME-7 Supply of MS materials and rollers for shutter at CH:20.500 of Mahe branch canal

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od27126/2020_2021/MH : Supplying and fixing cast steel thrust roller assembly having 120mm Dia, 50mm tread width, SS(304) shaft and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

od27124/2020_2021/MH : Supply and fixing of MS bolt and nuts

SHEME8 Fabrication of shutter, Supply of rubber seal and screw rod, painting and erection of shutter at CH:20.500 of Mahe branch canal

od27125/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Plat form and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

od27127/2020_2021/MH : Providing EN-8 Screw rod 7.5 tonne capacity 4.00m lift screw hoist having one number of EN-8 screw shaft having lifting speed of around 5cm /min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance

od27207/2020_2021/MH : Erection of canal shutter (upto 2 T weight) / hoist bridge/ platform including handrails, ladder etc. for the same including alignment correcting and setting complete including cost of all machinery, labour all incidental and conveyance charges, leasd and lift charges etc complete but excluding cost of materials already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

SHEME-9 Supply, Fabrication, painting, erection of hoisting bridge of shutter at CH:20.500 of Mahe branch canal

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od27129/2020_2021/MH : Supply and fixing of MS bolt and nuts

od27132/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Plat form and accessories etc. for the same as per approved specifications, drawings and directions ofdeptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handlingcharges etc complete but excluding cost of material already supplied

od27134/2020_2021/MH : Supply of GI pipe 32mm dia

od27232/2020_2021/MH : Providing shaft to connect two worm reducers (already supplied)of the operatingmechanism including cost of MS shaft,coupling flange ,keys,nut and bots,rubber packing etc.data for 1 shutter

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od27246/2020_2021/MH : Erection of canal shutter (upto 2 T weight) / hoist bridge/ platform including handrails, ladder etc. for thesame including alignment correcting and setting complete including cost of all machinery, labour allincidental and conveyance charges, leasd and lift charges etc complete but excluding cost of materialsalready supplied

SCHEME 10 - Dismounting and seal change of Mahe branch canal shutter from CH:2.55 to CH:11.00 (7Nos)

od27141/2020_2021/MH : Dismounting the existing operating mechanisms ,shutter and supporting structure complete and safe keeping of same in the nearby bank and arresting the shutter in the groove itself as per the direction of Departmental officer at site.Data for 1 shutter

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

SCHEME 11-Overhauling and painting of Mahe branch canal shutter from CH:2.55 to CH:11.00 (7Nos)

od27146/2020_2021/MH : Overhauling the Gear box of canal shutter -greasing the gear wheels,refilling the gearbox, changing the oils seal and bushes ,damaged nut and bolts etc complete and re fixing.cost includes cost of all materials, labour charges,hire charges of tools etc.complete

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od27206/2020_2021/MH : Erection of exiting canal shutter and hoist unit complete

Bidder Name

C.V.Radhakrishnan