SPECIAL REPAIRS TO BLDG NO- P41, P-42 ,P-43, P-44 AND P-45 AT NACHNA UNDER AGE (I) POKARAN

Amount

Dismantling of Stone slabs and tiles of any description or thickness in floors, walls, aprons etc. laid bedded and pointed in any mortar, removing serviceable tiles to store and rubbish off the premises.

Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded (but not backing) & removing serviceable tiles to store and rubbies of the premises

M&L for non skid ceramic coloured tiles of 7 to 8mm thick, (square and rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm (including size 400mmx400mm), as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.

M&L for Vitrified ceramic tiles , Light Shade, 10mm thick (square and rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. all as specified.

M&L for Vitrified ceramic tiles light shade 10 mm thick ( Square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including provision of backing coat of 10mm thick in CM (1:6), complete all as specified and directed.

S&F coloured glazed ceramic tiles size 350x250x7mm /450x350x7 mm thick on vertical surfaces, set & joined in neat cement slurry on stone surface and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10 mm thick in CM (1:4) all as specified & directed by Engineer-in-charge.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, cooking platforms over 20 mm thick screed bed in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M & L for 5cm thick sand stone slabs in shelves & similar works, etc. n exc. 2m in length, punched dressed on face and along exposed sedes, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete as specified & directed by Engineer-in-charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 20 mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.

M&L for machine cut kota stone slab 20-25mm thick as in skirting & dado and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick backing coat in CM (1:4) complete all as directed by Engineer-in-charge.

M&L for Udaipur green marble 18 to 20mm thick, prepolished, as in window & ventilator cills in single length including 20 mm thick screed beeding of cement mortar 1:6fixed & pointed all as specified & directed by Engr-In-Charge.

Complete removal of existing water proofing treatment incl bedding if any n exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness all as per the requirements all as directed by Engr-in-Charge.

M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only)

Supply only integral Waterproofing compound.

M&L for water proofing treatment with 3 mm thick APP (Actatic Poly Propylene) modified membrane reinforced with non woven polyester mat of weight 150 gms/sqm as centre core & without multiple layers of polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.3 kg/sqm over roof (an overlap of 100 mm & 150 mm shall be provided on sides & end respectively )including a coat of bitumen grade 85/25 @ 1.20 Kg/Sqm and applying one coat of aluminium paint @ 100ml/sqm on top of APP membrane to get uniform finish complete all as per specified and directed.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water all as specified

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 10mm thick in 1:3 cement plaster on ceiling of stone surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick plaster in CM 1:4 on fair faces of concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper on chalk whiting over 3mm thick wall care putty on wall all as specified & directed by Engineer-in- Charge.

M&L for preparation of plastered surfaces of ceiling and applying three coats of white wash all as specified & directed by Engineer-in- Charge.

Complete preparation new surfaces of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Complete preparation new surfaces of Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a two coat of oil bond distemper on surfaces of walls complete all as specified & directed by Engineer-in-charge.

M&L for preparing old surfaces and applying a coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a two coat of oil bond distemper on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and painted surfaces and applying a two coat of Acid resistatent paint over Priming plastered and other surfaces with alkaliresistant priming paint of walls complete all as specified & directed by Engineer-in-charge.

Taking down door chowket or frame incl shutter area n exc 1.50 sqm each and removing to store.

Taking down door chowket or frame with shutters area exc 1.50 sqm and n exc 4.00 sqm and removing to store.

S&F 35mm thick factory made plain framed, panelled shutters (two panels) With lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated all as specified.

S & F, 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.

S& F Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality A

S&F Factory made Box Type steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay , complete without glazing bars, dovetailed or complete as shown in Drawing No. CEJZ/TD/22 sh 1/1 to 1/3, and all as specified & directed by Engineer-in-Charge.

S&F Factory made Box Type steel ventilators fixed type, incl with one shop coat of primer,complete as shown in Drawing No. CEJZ/TD/24 sh 1/1 to 1/3, and all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe 290.Gde-E-165

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F, Powder coated (minimum thickness of powder coating 50 micron) to anodised aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, etc complete all as specified & directed by Engineer-in-charge. (Note :- Floor door spring & sheet glass shall be measured and paid seperately).

M&L for sheet glass 5.5mm thick, ordinary quality and glazing with, rubber packing exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

M&L Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactures

S&F 2 levers brass mortice lock vertical type, size 100mm including escutcheon plates and two kays complete all as specified & directed by Eng-in-Charge

Supply and fix in repairs Aluminium (extruded section body), Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed

S&F mild steel butt hinges medium weight 100mm size. Mild steel cold rolled as specified & directed by Engineer-in-charge.

S&F Aluminium handle, cast type, anodiesed of size 150 mm & fix to shutter complied all as specified & directed by Engineer-in-Charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 150mm

S&F 300mm long aluminium alloy, anodised, sliding door bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium and fixed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm size.

S&F stainless steel wire 0.36mm normal dia of wire and average width of aparture 1.40mm complete all as specified & directed by Engineer-in-charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.50 sqn in each pane.

M&L for preparing new/previously untreated steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer

M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S& F 25mm thick , Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneers on both faces, fixed with screws to timber frame-work

S&F Secound Class Hardwood, plain fillets square rectangular or trangular in section wrought sectional area exceeding 13 sqcm and n exc 25 sqcm fixed with nails, bullnosed, splayed, chamfered or rounded on one edge or face

S&F Secound Class Hardwood, plain fillets square rectangular or trangular in section wrought sectional area exceeding 3 sqcm and n exc 6 sqcm fixed with nails.

M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M&L for cement concrete type B1(1:2:4) 20 mm stone aggregates in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, hold fast, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F 125 mm long Hasp and staple, allumuniun anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30 mm ( when open)

Ball catcher with 8 mm dia steel ball and brass body and skirting plate including leting in and fixed complete all as specified and directed.

S & F 100 mm long Extruded aluminium alloy handles, fabricated type., anodised

Supply and fix repairs decorative type curtain rod , stainless steel, 25 mm dia with not less than 1mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Demolition of cement concrete unreinforced in groundfloors and pavings not exc 15cm thickness below or above ground level etc all as specified and as directed by Engineer-in-Charge.

M&L for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregates) as in plinth protection finished even and fair w/o using extra cement

Dismantling of water tanks and removing to store capacity of tank exc 250 and n exc 500 ltr.

Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,500 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

Dismantling Water Tanks & removing from site, capacity of tanks 500 ltr and n exc 1000 ltr

S & F Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position all as specified in SSR Pt-I, exc 1000 ltr capacity with 20 mm dia brass ball valves high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore to walls, ceiling etc.

Ditto all as per item No- 76 here in before but 20mm dia pipe

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc.

Ditto all as per item No- 78 above here in before but in 20mm bore pipe

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe.

S&F in repairs for stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs

S&F in repairs 15 mm bore bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs

S&F Viterious china White Wash Hand Basin of size 550mm x 400mm including 15 mm pillar cock cast copper alloy CP fancy type, 15mm cast copper stop valve fancy type, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long, in repairs.

S& F in repairs Soap dish, vitreous China white, approximate size 160x 160x90m, fixed to plugs with chromium plated brass screws

S&F towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats in repairs

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair for 15 mm bore of pipe.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes: including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified.

S&F in repair CP Shower rose 125mm size with swivel joint including fixing sted pipe for union.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F vitreous China wash down water closet coloured pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) complete connected to drain fixed in repair

S&F in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device

S&F in repairs CP Health faucet spray with 1.5m long pipe with wall hook & fixed in repair complete

Supply and fix in repairs Bib taps two way type , cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm as in repairs

S&F PVC flushing cistarn 10 ltrs capacity ISI marked incl, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required, exc 150sqcm & n exc 400 sqcm complete all as specified and directed,

Demolition and breaking up of cast iron Rcc, Ac or PVC pipe jointed in CM any dia bore

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

PVC (SWR) multi floor trap with grating including jointing with solvent cement 100 mm dia out let.

S&F PVC (SWR) pipes of 110 mm dia, single socketed in any length with rubber ring joints fixed to wall

S&F PVC (SWR) pipes of 75 mm dia, single socket in any length with rubber ring joints, laid in trenches or in floors fixed to walls

S&F 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius

S&F PVC(SWR) bends with access door of 75 mm dia, any radius

S&F PVC (SWR) bends of 110 mm dia, any radius

S&F PVC (SWR) bends of 75mm dia, any radius

(PVC (SWR) vent cowl, 100 mm dia

S &F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and decorative cast iron artical etc. Note:- Before fabrication of steel gate design will be approved by GE.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F Pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Demolition of stone/ boulder masonry and built in cement mortar all as specified & directed

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Demolition of wall ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

S&F ,10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium / G.I./M.S. as per specification and drawing, including Anodised aluminium snap grid frame work for false ceiling all as specified

Demoliton of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similars complete

M & L Reinforced cement concrete ( M-25 Design Mix ) 20mm grade aggregate as in Slab, chajjas & parapets complete all as specified and directed.

M&L form work to sides and soffits of Slab, chajjas & parapets complete all as specified and directed.

M&L TMT bars 10mm dia & over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per srl item No 121 here-in-before but 6mm to 8mm dia complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete, including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfases of walls, floors, etc complete all as specified and as directed.

Taking down main switches/DB'S alongwith existing board,MCB including removing the same from site and making the good to the disturbed surface complete all as specified and as directed.

Taking down the existing unserviceable sub main wiring of any type/description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M&L for point wiring for light/Fan point using colour coading as per IS with 1.5 sqmm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 volts ,ISI-694 marked drawn through medium grade PVC casing caping and accessories on wall/roof/floor etc(ISI marked0 with mild steel/pressed steel sunken box 1.6 mm thick (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches,socket and fan regulators etc including PVC insulated multistranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earh duly complete including making good of disturbed surfaces of wall in same specification as per existing complete all as specified and directed.

All as per ser item No 126 here-in-before but socket outlet 3 pin 5 amps same board complete all as specified and directed at site.

All as per ser item No 126 here-in-before but socket outlet 3 pin 5 amps Ind board complete all as specified and directed at site.

All as per ser item No 126 here-in-before but bell point point controlled by one, one way bell push complete all as specified and directed at site.

All as per ser item No 126 here-in-before but socket outlet 3 pin 15 amps ind board with provision of 4 x 4.0 sqmm (phase & neutral) PVC insulated copper conductor cable and 1x 4.0 sqmm as earth continuity conductor on independent board complete all as specified and directed at site.

S & F single pole and nutral enclosure 10 A with a two pin and earth plug and socket complete with one single ple and nutral MCB complete all as specified & directed by Engineer-in-Charge (Make : Anchor/Havells/Legrand

Supply and Fix switch piano,flush type ,6 amps,230 volts,single pole,one way (ISI marked) complete all as specified and as directed.

Supply and Fix switch piano,flush type ,16 amps,230 volts,single pole,one way (ISI marked) complete all as specified and as directed.

Supply and fix switch Socket combination, multipurpose, 3 pin 6 amps flush type conforming to IS complete all as specified and directed at site.

Supply and fix Socket outlet multipurpose 2 in 1, 6/16 amps flush type conforming to IS complete all as specified and directed at site.

S&F in repai fan regulator step type , five step ,230 volts complete all as specified and directed at site.

M&L lamp holder insulated body with back plate suitable for batten fittings

S&F ceiling rose, 3 phase/PVC/polycarbonate ,isolated body complete all as specified

Supply and Fix bell push, 5 amps,230 volts, (ISI marked) complete all as specified and as directed.

Supply and Fix in repairs buzzer, Ding Dong AC 230 v,50 Hz complete all as specified and as directed.

Supply and fix TPN DB 4 Way 415 V double door type with 200 amps rated bus bar for fixing of MCBs complete

Supply and fix MCB DB SPN 8 way double door IP-43 suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site.

Supply and fix MCB DB SPN 4 way double door IP-43 suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site.

S&F MCB TPN 415 Volts, 63 amps, 10 KA 'C' series complete all as specified and directed at site.

S&F MCB SPN 40 Amps, 240 volts 'C' series 10 KA complete all as specified and directed at site.

S&F MCB SP 6 to 32 Amps 240 volts 'C' series 10 KA complete all as specified and directed at site.

M&L for Sub main wiring complete with 2x4 Sqmm, single core, multi stranded copper conductor FR PVC insulated and sheathed cable 1100 Volts grade, drawn in concealed PVC conduit as per direction of engr-in-charge, required along walls/ roofs etc including 4 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly including taking down old burn out sub main wiring complete all as specified and directed at site.. Note:- All three wire/cable(phase, neutral and earth) should be run through for each individual circuit from the DBs & painting over surface conduit to be done to match with walls/ ceiling existing surfaces.

All as per ser item No 147 here-in-before but size of su main wiring 2 x 6 sqm for phase and neutral and 1 x 6 sqmm for arh wire

All as per ser item No 147 here-in-before but size of su main wiring 2 x 2.5 sqm for phase and neutral and 1 x 2.5 sqmm for arh wire

S&F B22 base 9 watt 4 star rating LED lamp all as specified and directed at site.

Taking up of old unsv GI earthing with GI plate complete all as specified and directed at site.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. Note : (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes cost of 7.5 M earth lead wire. Any variation in length shall be adjusted through deviation order.

Supply and fixing LED lights fitting 1x 20 watt, 220 v, Ac decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable suitable size from ceiling rose complete all as specified and directed at site.

Taking down old unsv bldg security light of any type

S & F LED building Security light fitting 1 x 20 watt, 230 V AC outdoor type with high pressure die cast aluminium hosing and heat esistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing LED luminaire 600 mm x 600 mm , 35/36 watt, 220 v AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete.

Taking down old broken /rusted GI bracket of bldg security light fittings

S&F service bracket for street light fitting made out of 40 mm bore light grade GI pipe of length 1.2 mtr long (approx) bend to shape 115 degree and fix to pole for fixing of street light fitting on pole/wall etc fixed with 2 Nos 32x 6 mm GI clamp, Nut,bolts,washer etc complete all as specified and directed.

Taking down existing serviceable exhaust fan and keep safe custody as per direction of Engr-in-Charge

Fixing only exhaust fan and connecting up incuding provision of cable from ceiling rose/connector to fan complete all as specified and directed at site.

Taking down the old unsv LT UG cable of size 25 sqmm with aluminium lugs etc complete all as specified and directed at site.

Supply and Laying in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer In charge of cross sectional area of 25 Sqmm 4 core

All as per ser item No 161 here-in-before but cross sectional area of 16 sqmm x 4 core

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation/trenches and getting out for hard/dense soil.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engr-in-Charge.(Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying reinforced precast concrete cable cover class LV, Type 1 flat with size 250 mm x 150 mm x 40 mm all as specified and directed by Engr-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified & directed by Engr-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as directed by Engr-in-Charge.

M&L for cutting of road, hard standing made of concrete or premix carpet, WBM,soiling and morrum filling including excavation for laying of cable pipe all as directed and making good the road/ hard standing by using all old /new materials and with PCC (1:2:40 etc, required to match with the existing surface complete all as specified and directed.

Taking down the old unserviceable/rusted light grade GI pipe of size 80 mm dia complete all as specified and directed at site.

Material and Laying GI tubing light grade of sie 40 mm dia for protection of cable in trenches /on pole all as directed by Engr-in-Charge.

M/s Shri Inder Construction Company

Habib Traders

M/s Rashid Mohammed

Bachan Construction Company

ALPHA ENGINEERING COMPANY