ROAD WORK

No. figures Amount

1 Clearing and grubbing road land including uprooting wild 2.20 Hect. 28393.04

vegetation grass bushes, shrubs, sapling and trees of girth up to

300mm removal of stumps of trees cut earlier and disposal of

unserviceable materials and stacking of serviceable materials as

per Clause-201 (area of light density) by mechanical means in

area of light jungle.

2 Box cutting the road surface to proper slope and camber for 2310.00 Cum 104.21

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed within all

lead and lift.

3 Earthwork in cutting in all sorts of soil and soft murrum including 1182.00 Cum 127.75

conveying and spreading the stuff, embankment as and where

directed within 200 meters from the end of cutting with all

required lead and lift.

4 Scarifying and removing bitumen macadam surface including 5940.00 Sq.m. 39.63

completely removing out the entire existing bituminous surface,

stacking useful materials on road side and disposing off

remaining stuff complete as per instruction of in charge Engineer.

5 Providing, laying and spreading Granular sub base (Grade-I) by 1155.00 Cum 767.60

providing close graded MCBT material in single layer with motor

grader on prepared surface, mixing by mix in place method with

rotavator at OMC and compacted with vibratory roller 80 to

KN static weight to achieve desired density etc. completed.

6 Providing & laying compacted layer of WBM of Grading-I MCBT 1980.00 Cum 1241.29

metal of size 63mm to 45mm in required layers including using

16% stone screening, 13.2mm size and 8% stone dust as filler

including spreading, watering and consolidation by vibratory roller

as per MORTH specification etc. complete as directed by

engineer in charge.

7 Providing & laying compacted WBM Grading-II using MCBT 2750.00 Cum 1250.78

metal of size 53mm to 22.4mm in required layers including using

24% stone screening, 11.2mm size and 8% stone dust as filler

including spreading, watering and consolidation by vibratory roller

as per MORTH specification etc complete as directed by

engineer in charge.

8 Earthwork for embankment including breaking clods, dressing 3189.00 Cum 183.70

with all lead and lift including rolling with power roller, watering

and consolidation from borrow pits within land width.

9 Providing and laying compacted of specified quarry spaull in side 600.00 Cum 711.24

shoulder including carriage of material and spreading on

prepared base including compacting as per MOST specification

etc. complete.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

10 Providing and laying bituminous grout 37.5mm thick with asphalt 1692.00 M.T. 2426.45

of grade VG-30 at the rate of 1.99% by weight of mix for mixing

using B.T. chips of required gradation including cleaning and

heating asphalt premix materials by hot mix process in proper

gradation and laying with paver finisher and consolidation by roller

of 8 to 10 tonnes including cost of all materials, asphalt

aggregates, labour charges, royalty charges etc. completed as

directed including flushing key aggregate @ 0.13 cum/10 sq.m.

11 Providing and laying 37.5 mm compacted thick Bituminous 1861.00 M.T. 2915.29

Macadam with B.T. aggregate as per MORT& H specification &

bitumen grade VG-30 for mixing @ 34 Kg. / M.T. i.e. 3.4% of total

weight of mix including heating & mixing the aggregate & asphalt

in continuous batching mix plant and spreading the same by

paver finisher & consolidation with vibratory roller including

providing all materials equipments, tools & plants, fire wood, oil,

kerosene, labour charges etc. complete using contractor's own

machinery drum mix plant & paver finisher etc. complete

including providing & laying uniformly tack coat (2.50 Kg / 10Sqm)

12 Providing & laying 20 mm thick mix seal surface using B.T. stone 1037.00 M.T. 3486.96

chips as per MORT&H gradation Type - A and specification with

bitumen grade VG-30 for mixing at the rate of 51.00 kg/M.T. of

total weight of mix (i.e. 5.10 % of total wt. of mix) and mixing

aggregate and asphalt by drum mix plant and spreading the same

by paver finisher including rolling and consolidation with static

roller and providing tools and plant fire wood, oil, kerosene, labour

charges using contractor own machineries etc. complete.

13 Providing and fixing ordinary kilometer stone of precast C.C. 1:2:4 5.00 No. 704.34

including necessary reinforcement as per IRC type design in C.C

1:4:8 including painting, lettering etc. complete. (For ODR, V.R.)

14 Providing and fixing Hectometer stone as per I.R.C. type design 20.00 No. 356.50

including painting, lettering etc.complete (i) Fixing in C.C. 1:5:10

15 Providing and fixing Guard stone as per I.R.C. type design 210.00 No. 349.11

including white washing etc. complete (i) Fixing in C.C. 1:5:10

16 Hazard Marker Sign :- Providing and fixing sign boards made out 20.00 No. 3518.69

of 2mm aluminium sheet / 4mm ACP (Aluminum composite

panel) size 90 x 30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint reflectorised with Micro Prismatic Grade retro

reflective sheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T. Specifications; 1.8mtr long stand post of 75 x 75 x 6mm

/ 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with best

quality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x

45 x 60 cms. for each leg including excavation, curing etc.

complete under the supervision of engineer in charge. A warranty

for 7 years for the retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

17 Village Name / Bump Ahead Sign :- Providing and fixing sign 12.00 No. 6397.44

boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite panel) size 90 x 60 cms. rectangular as per

design of IRC-67-2012. Pre treated with phospheting process &

acid etching, coated with one coat of epoxy primer and two coats

of best quality epoxy paint; reflectorised with Micro Prismatic

Grade retro reflective sheeting of Type-4 as per ASTM D-

and latest M.O.S.T. specifications; 3.3mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted

with best quality epoxy coatings in black and white bends. The

details of symbol or inscription/letters / numerals for each board

shall be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each

leg including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for the

retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting

18 Direction (Junction) Sign :- Providing and fixing sign boards made 5.00 No. 21287.51

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

panel) size 244 x 122 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint, reflectorised with Micro Prismatic grade retro

reflective sheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T. Specifications; 4.0mtr long (2 Nos.) stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 50 x 50 x 5mm; painted

with best quality epoxy coatings in black and white bends. The

details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 cms. for each leg including excavation, curing

etc. complete under the supervision of engineer in charge. A

warranty for 7 years for the retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for

the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

19 Citizen's Information Board : Providing and fixing of typical 2.00 No. 23062.34

information board as per instruction. Two M.S. plate of 1.6mm

thick of 900mm x 750mm size fixed at top and bottom duly

welded with M.S. angle with angles of 25 x 25 x 5mm thick M.S.

plate shall be welded by two vertical M.S. flat and four horizontal

M.S. flats 5mm thick to 75mm x 75mm of 12 SWG square tube

posts duly embedded in cement concrete M-15 grade C.C. blocks

of 600 mm x 600mm x 750mm below ground level. Painting new

letters and figures of any shade with ready mixed synthetic

enamel paint of superior quality in required shade and coloured,

all sections of frame joints and steel tube will be painted with

primer and two coats of epoxy paint as per drawing clause

& Annexure 1700.1 (10.16).

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

20 Road marking with hot applied thermoplast compound with 1300.00 Sq.m. 367.73

reflectorising glass beads on bituminous surface and laying of hot

applied thermoplastic compound 2.5mm thick including

reflectorising glass beads @250 gms/sqmt area, thickness of

surface applied glass beads as per IRC 35. The finish surface to

be level uniform free from streaks and holes.

21 Supply & fixing logo board of MMGSY diamond size (600mm x 2.00 No. 4129.89

600mm) 16 gauge & board plate size (900mm x 250mm)

gauge thick M.S plate and 2.40 mt. deep length single angle 75 x

75 x 6 mm size including fitting and painting lettering with

luminous color as per drawing etc. complete.

22 Cautionary Warning Sign :- Providing and fixing sign boards 20.00 No. 3906.19

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite panel) size 90 x 90 x 90 cms. equilateral triangle as

per design of IRC-67-2012. Pre treated with phospheting process

& acid etching, coated with one coat of epoxy primer and two

coats of best quality epoxy paint reflectorised with Micro Prismatic

grade retro reflective sheeting of Type-4 as per ASTM D-4956

and latest M.O.S.T. Specifications; 3.6mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted

with best quality epoxy coatings in black and white bends. The

details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 cms. for each leg including excavation, curing

etc. complete under the supervision of engineer in charge. A

warranty for 7 years for the retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for

the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

23 Informatory Warning Sign :- Providing and fixing sign boards 4.00 No. 3990.65

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite panel) size 80 x 60 cms rectangular as per design of

IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint, reflectorised with Micro Prismatic Grade

retro reflective sheeting of Type-4 as per ASTM D- 4956 and

latest M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with best

quality epoxy coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x

45 x 60 cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 7 years for the retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test

report from third party test lab for

the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

24 Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting 70.00 Rmt. 3354.21

a "W" metal beam crash barrier comprising of 3 mm thick

corrugated sheet metal beam rail, 70 cm above road/ground

level, fixed on ISMC series channel vertical post, 150 x 75 x

mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below

ground/road level, all steel parts and fitments to be galvanised by

hot dip process, all fittings to conform to IS:1367 and IS:1364,

metal beam rail to be fixed on the vertical post with a spacer of

channel section 150 x 75 x 5 mm, 330 mm long complete as per

clause 810)

25 Excavation for foundation up to 1.50 mt. depth including sorting 716.00 Cum 162.88

out and stacking of useful material and disposing off the

excavated stuff within all lead and lift for all sorts of soil.

26 Providing and laying in foundation with ordinary cement concrete 1066.00 Cum 3105.12

M-100 mix and providing necessary vertical pin headers including

formwork, vibrating, ramming and curing complete.

27 Providing and casting in situ ordinary cement concrete M-150 mix 576.00 Cum 3678.42

and providing necessary pin headers including shuttering,

scaffolding, laying, vibrating, curing and finishing complete

without V-groove (A) height 0.0 to 5.0 mt.

28 Supplying and fixing reinforced concrete heavy duty non-pressure 105.00 Rmt. 6596.20

pipes with collars for culverts including setting and joining the

pipes in C.M. 1:2 watering and laying (to level or slopes) of I.S.

class NP-4 of 1200mm internal diameter.

29 Providing and fixing I.S.I. mark T.M.T. Bar Fe-550D 24056.00 Kg. 76.22

reinforcement for R.C.C. work including binding, bending and

placing in position complete upto floor two level.

30 White washing with lime on wall surface (two coats) to give an 364.00 Sq.m. 12.09

even shade including thoroughly booming the surface to remove

all dirt, dust, mortar drops and other foreign matter.

31 Providing and casting in situ ordinary cement concrete M-250 mix 1540.00 Cum 4318.76

with Trimix C.C. Road laid as directed including vibrating, curing

and filling in joints with bitumen complete.

32 Filling available excavated earth (excluding rock) in trenches, 132.00 Cum 130.40

plinth, sides of foundation etc. in layer not exceeding 20 cm in

depth consolidating each deposited layer by ramming and

watering etc. complete.

33 Providing and laying weep hole in abutment and returns by using 108.00 No. 82.57

A.C. pipes of 100 mm dia. with laying in proper grade and jointing

the completed as per detailed specification.

TOTAL Rs.

i.e. Rs. Three Crore Seventy Five lacs Eighty Four thousand Eight hundred Ninety Nine and Thirty Five

paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Valiya Bharuch Bharuch