REPAIR TO GI PIPE CHARPOY PLY TOP AND MAP BED UNDER GE (WEST) BAREILLY

Amount

Charpoy GI Pipe, FD-220

(i) Removing the old unserviceable ply top from Charpoy GI Pipe and tightening of all loose components, supply and fixing new ply wood 1980x900x12mm thick, BWR exterior grade ISI marked duly sharp the all corners with mild steel galvonized iron nuts and bolts of 6mm dia compete all as specified and directed.Make: Century/Kit ply/Green Ply/Archid

(ii) Removing the old unserviceable and broken flate iron stiffener size 900x25x4mm and S&F new flate iron stiffener of size 900x25x5mm duly primer coated and two coat of black synthetic enamel paint complete all as specified and directed.

(iii) Taking down old down u/s long rails of charpoy and S&F new long rails of 32mm nominal bore GI Pipe medium grade both ends threaded of make SWASTIK/PRAKASH/JINDAL/TATA. Acomplete all as specified and directed.

(iv) Taking down the old u/s short rails of charpoy and fixing only rails retrived under sertial No iii (long rail) here in before with and including cutting threading at both ends complete all as specified and directed (Note old and u/s long rails converted into two short rails)

(v) Taking down the old u/s legs of charpoy and fixing only legs made out from old short rails retrived under item No iv herein before with and including cutting threading at one end complete all as specified and directed (Not : old and u/s short rails will be coverted into Nos of legs)

(vi) Taking out of u/s and broken existing elbow 3 way from the charpoy and S&F new elbow 3 way of 32mm bore dia, medium weight, ISI marked complete all as specified and directed.

(vii) Taking out old unserviceable and broken existing checknuts from the charpoy and S&F new checknuts from the charpoy of 32mm before of medium weight complete all as specified and directed.

Charpoy steel Iron, FD/MAP-II/01

(i) Removing the old unserviceable ply top from Chaproy steel Iron and S&F new ply wood 1930x860x12mm thick, BWR exterior grade ISI marked with mild steel galvonized iron nuts and botls of 6mm dia with suitable size compete all as specified and directed.Make: Century/Kit ply/Green Ply/Archid

(ii) Removing of dents& bends then welding wherever required, cleaning the all steel surfaces by using various type abrasive cloth emery and applying two coat of spray painting with synthetic enamel paint (Black) over a coat of red oxide primer up to a glossy finish complete.

(iii) Replacment of u/s hard rubber shoe of best quality as approved .

Bed Hard Steel, FD/E6/MAP/08/®

(i) Removing the old unserviceable ply from Bed hard steel Iron and S&F new ply wood 1980x850x12mm thick, BWR exterior grade ISI marked with mild steel galvonized iron nuts and botls of 6mm dia and PVC edging (25x25mm) shall be placed around the ply complete all as specified and directed.

(ii) Replacment of u/s hard rubber shoe of best quality as approved .

(iii) Removing the old unserviceable pre-laminated particle board from head rest of bed hard steel and S&F the new MDF pre-laminated board of exterior grade of size 630x200x18mm with PVC edging of size 25x25mm around the board.

(iv) Removing the old unserviceable pre-laminated particle board from foot rest of bed hard steel and S&F the new MDF pre-laminated board of extterior grade of size 630x280x18mm with PVC edging of size 25x25mm around the board.

(v) Removing of dents& bends then welding wherever required, cleaning the all steel surfaces by using various type abrasive cloth emery and applying two coat of spray painting with synthetic enamel paint (Black) over a coat of red oxide primer up to a glossy finish complete.

Notes:-

JAISWAL ENTERPRISES

D K THUKRAL AND SONS

M/S MALIK ENGINEERS & CONTRACTORS

F.M. KHAN SONS