Seperation of Double Distribution Transformers

Amount

Separation of Double Distribution Transformers ( Two locations) and provision of HVDS DTs in Palakurichy section of Manapparai division of Trichy Metro EDC under works contract for a period of 3 months (or) Exhausting of face value under RDSS scheme

Excavation of Pole Pits In Hard Soil (common to all size of poles)

Excavation of Stay pit of 4.5 ' to 5 ' depth using JCB / Manual

Erection of Poles and Accessories

Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc.

Fixing of V cross arm 3.5 feet

Fixing of LT 3 phase cross arm

Fixing of HT / LT Ti fitting

Fixing of HT PIN insulator with Pin 11 KV

Fixing of HT strain disc 11 KV

Fixing of Two Tapping cross arm per cut point upto 33 KV line including fixing of Discs,insulators and Jumpering etc..

Fixing of shackle

Fixing of Aluminium knob

Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor

Paving and stringing of conductors of above 7/2.59 mm ACSR or other equivalent conductor upto 7/3.35mm ACSR or other equivalent conductor

Erection of Distribution Transformer including loading of Distribution Transformer at stores and erection at structure or vice versa. (i) Upto 25 KVA Distribution transformer / Metering set.

Erection of 11 KV single pole Structure including erection of DT complete without centre support

Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour) (i) Mass concreting of poles

Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour) concreting of Stay .

EARTHING: (i) Earthing of poles with GI wires 4 or 6 SWG by coil earthing

Loading of various sizes of poles all REC, RCC poles

unloading of various sizes of poles all REC, RCC poles

Loading of Conductor

Unloading of Conductor

Loading / Unloading of line materials

Transportation of all types and sizes of poles and from Road side to pole pit and vice versa upto 0.50 KM

Transportation of all type of poles by bullock cart or other vehicle up to 5.0KM

Transporting of conductors of all sizes from road side to pit locations upto one KM of Conductor

(i) Transporting of Distribution Transformer / Line materials from stores to office / site upto 10 KM distance by engaging 1 Ton capacity Minidor (Lorry)

Dismantling of conductor of upto 7/3.35 including transporting the conductors to the nearest road side and stocking in coils

Numbering of poles including base painting and with cost of paint

Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit

For breaking the mass concrete of all supports

Dismantling of DT

Dismantling of Cross arm clamps TI fitting hardwares, insulators etc.,

Painting of Cement poles by Distember coating including cost of distember

Painting of distribution transformer of all capacities (paint to be supplied by the Board) including cleaning of DT