Four laning of Naroda - Dehgam - Rakhiyal - Harsol - Dhansura road Km 08/000 to 35/450 (SH No.68) Section Km.22/500 to 35/450 Taluka Dehgam district Gandhinagar

Amount

Sub Heading 1

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable material. [A] By mechanical means in area of light jungle.

Earthwork in cutting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed within 200meters from the end of the cutting with all required lead and lift.

Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road sideand disposing off remaining stuff with all lead and lift.

Box cutting the road to proper slope and camber for making a base for road work including removing the excavated stuff and (Refilling same) depositing on road in layer wise, side slope as directed up to all lead etc. complete.

Construction of 500 mm thick compactd layer of Sub grade including watering up to OMC, rolling and consolidation with vibratory roller etc, complete as directed (CBR not less than 10%).

Construction of granular Sub base of 150 mm thick in by providing GSB grade-I coarse graded material gravel using B.T. metal size 26.5mm to 53 mm @ 35%, 26.5 mm to 4.75 mm @ 45% & below 2.36 mm @ 20% spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per Clause 400.1 grade-I.

Construction of granular Sub base by providing 110 mm thick GSB Grade-II coarse graded material (Grade-II) using B.T. metal 2.65mm to 9.5 mm@ 35%, aggregate 9.5 mm to 4.75 mm @ 25% and below 2.36 mm @ 40% incl. spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per Clause 400.1 grade-II.

Providing and laying spreading and compacting graded stone aggregate to wet mix macadam 250 mm thick as per MORT&H specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tippers to site, laying in uniform layers with paver in sub base/ base course on well prepared surface and compacting with vibratory roller to achieve the desire density.

Providing & applaying evenly priming coat with bitumen emulsion mixing of SS-1 grade prepared surface of garnular base including cleaning of road and spraying the primer at the rate of 7.50 Kg./10 Sqm. Using meachnical means etc. complete.

Providing 100 mm thick compacted side shoulder of Quarry spall on road site including collection of material spreding, rolling of watering etc. complete.

Providing diversion of road 5.50 mt. width (having 7.0 mt. formation width) for structure by providing & spreding earth work 100mm GSB-I, 150 mm GSB.II, 100 mm WMM and 20 mm MSS. The length of road is depend on site condition etc as directed by Engineer in charge. (The diversion shall be maintainance & repair in all weather season. No any extra payment shall be made for maintenace & repair work of diversion)

Providing and laying 50 mm Thick compacted Bitumious Mecadam (B.M) using crushed stone ggregate as per MORT & H specification and VG-30 Bitumen at the rate of 3.40 % by weight of total mix i.e. 34 Kg./Mt. for binding including heating and mixing the asphalt & aggregates & by continuous batch mix plant and transporting the mix and spreading the same by paver finisher & consolidation with vibratory road roller including using all necessary equipments, tools & plant including cost of all materials, fire wood, oil, kerosene, labour charges etc. complete

Providing and laying 50mm thick compacted D.B.M. with B.T. stine aggregate as per MORT&H gradation & specification with VG-30 for tack coat @ 2.5 Kg./10 smt. and VG-30 Bitumen Grade for mixing at the rate of 45.00 Kg./MT. by weight of total mixie. i.e.4.5 % by weight fo total, heating and mixing the asphalt VG-30 and aggregates by continuous batch mix plant & spreading the same by paver finisher including rolling & consolidation with 10-12 tonnes vibratory roller and power rolleri & providing all materials equipments, tools & plant, fire wood, oil, kerosene, labour charges etc. and using contractor's own machinery batch mix plant & paver finisher etc. complete

Providing and laying 40 mm thick compacted Bituminous concrete (BC) with B.T. aggregate as per specification MORT&H gradation and asphalt grade VG-30 for mixing at the rate of 55 Kg.M.T. i.e. 5.50 % by weight of total mix including heating the aggaregates & asphalt in continuous batch mix plant & spreding the same as by sensor paver finisher & consolidation with vibratory roller & flushing sand @ 0.30 cum/100 Smt. including providing all materials equipments, tools & plant, fire wood, oil, kerosene, labour charges etc. and using contractor's own machinery batch mix plant & paver finisher etc. complete

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and disposing of the excavated stuff as directed.(A) Depth up to 3.0 M. and lead up to 100m for 10 Cum (For dense & hard soil)

Providing & filling in foundation with ordinary cement concrete M 100 mix and providing necessary vertical pin headers including form work vibrating, ramming and curing complete.

Providing and casting in situ Ordinary cement concrete M-150 for R.C.C. Raft and cut-off walls including necessary shuttering laying, vibrating, ramming and curing complete.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slopes of I.S. Class NP3 casted by vertically vibrated technology of following internal diameter. (iv) 900 mm dia.

Numbering the C.D. work with approved paint including all materials for painting etc. complete.

Providing and placing in position FE 500/500D TMT bar reinforcement (I.S.I. mark) for following items including cutting, bending, hooking, and tying complete as per detailed drawing

Providing and laying weep hole in abutment and returning by using A.C. pipes of 100mm diameter including laying in proper grade and joining etc. complete as per detailed specification.

Providing Yellow and Black Patta (Three coats) including distempering (Three coats) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth as per instruction of Engineer in charge..

Dismantling the existing structure including removing and stacking the dismantled materials as and where directed. (A) R.C.C. work

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slopes of I.S. Class NP3 casted by vertically vibrated technology of following internal diameter. (vi) 1200 mm dia.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slopes of I.S. Class NP3 casted by vertically vibrated technology of following internal diameter. (v) 1000 mm dia.

Providing and casting in situ controlled cement concrete M-200 for R.C.C. work in pier, abutment and R.C.C. return as per drawings including centering shuttering, scaffolding where necessary, laying vibrating, curing and finishing complete.

Providing and casting in situ controlled cement concrete M-250 for R.C.C. work in superstructure including centering ramming vibrating, curing and finishing complete.

Providing and casting in situ controlled cement concrete M-300 for R.C.C. work in soild slab including centering, scaffolding curing and finishing complete.

Providing and laying controlled cement concrete wearing coat M-300 grade including reinforcement complete as per drawing and technical pecification Clause 800 and 1206.3.

Providing and casting in situ controlled cement concrete M-250 for Kerb/Kerb block including form work, curing and finishing complete.

Providing and casting in situ controlled cement concrete M-150 for approach slab including form work, curing and finishing complete.

Providing and casting in situ controlled cement concrete M-200 for approach slab including form work, curing and finishing complete.

Providing and casting in situ controlled cement concrete M-150 for coping, over riding retuns including form work, curing and finishing complete.

Providing and placing in position TMT { Fe-500/500D} bars reinforcement for following items including cutting, bending, hooking and tying etc. comp. as per detailed drawing. (A) RCC kerb (B) R.C.C. footpath (C) R.C.C. Approach Slab (D) Wearing coat. etc. compalete.

Providing and fixing in position mild steel dowel bars in pier caps for anchorage in fixed end as per detailed drawing including cutting, bending and welding.

Providing and fixing in position mild steel dowel bars in pier caps or abutments caps for anchorage in free end as per detailed drawing including cutting, bending and welding complete.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering.

Providing and filling sand behind abutments and between returns in layers as directed

Providing and laying filter media 600 mm thick directed at the back of abutments, returns, and wing walls as per detailed specifications.

Providing and fixing in position 20 mm thick promoulded joint filler in expansion joint for fixed ends of simply supported spans, covered with sealant complete as per drawing and technical specifications.

Diversion of water course, providing cofferdam and bund or island as may be necessary for foundation and maintaining the same for the period as may be necessary.

Providing and Fixing Sign Boards made out of 1.5 mm alluminium sheet/ 3 mm ACP (Alluminium Composite Panel) size 60x45 cm Rectangular plus 90x30 cms additional plate as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.6 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting Shavron board.

Providing and fixing 20cm. x 15cm x 2.5 cm. thick year plate of marble stone set in C.M. 1:4 including finishing and engraving letters etc. complete.

Providing R.C.C. crash barriers of design mix concrete M-400 mix as per detailed drawing and design including shuttering, laying, vibraring and three coats of cement wash and giving a perfect smooth finishing to line and level etc. complete.

Providing masonry steps with Cement Pointing on approaches as directed.

Providing G.I. 100mm diameter water spouts including necessary iron gratings as per drawings.

Providing and casting in situ controlled cement concrete M-200 for curing complete excluding the cost of form work and reinforcement for reinforcement concrete work in wall.

Providing up to floor two level precast cement concrete jali or grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire including roughening, cleaning, fixing and finishing in cement mortar 1:3 and curing complete. (A) 50mm thick

Reparing and maintenance of gutter as and where directed R.C.C. work.

Providing and fixing ordinary kilometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design including fixing in C.C. 1:4:8 including painting, lettering etc. complete ( For N.H., S.H. and M.D.R.)

Providing and fixing 5th kilometer stone of pre-cast C.C. 1:2:4 as per I.R.C. type design including fixing in C.C. 1:4:8 including painting, lettering etc. complete ( For N.H., S.H. and M.D.R.)

Providing and fixing precast C.C. M-150 hectometer stone with necessary reinforcements per I.R.C. type design including painting, lettering etc. complete (ii) Fixing in C.C. 1:5:10

Providing and fixing precast C.C. M-150 guard stone with necessary reinforcements per I.R.C. type design including white washing etc. complete (ii) Fixing in C.C. 1:5:10

Supplying and fixing Jumbo Bollard L Type: Made out of 1.5 mm C.R.C. sheet; height: 188 cms; Bottom diameter: 30 cms: Top diameter 18 cms with direction plate of 45 cms diameter; fabricated as per attached drawing; pretreated with phospheting process; painted with epoxy coatings; Reflectorised with retro reflective sheetings specified by M.O.R.T. & H. latest specifications. High intensity grade.

Kerb guard sign board(small) :- Providing & fixing Sign boards made out of 2 mm aluminum sheet, size 240 x 30 cms.i U shape as per the attached drawing Pretreated with phoshpheting process and acid etching; with one coat of epoxy primer and tow coats of best quality epoxy paint refectories with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications stand post and frame fabricated from suitable size iron angle 50 x 50 x 5 mm, 10 mm Sq.bar as required painted with best quality epoxy coating. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Road marking audiblo raised vibratory pavement making with reflectorising glass beads on bituminioussurface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 grams per square metre area. Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level, uniform and free from streaks and holes

Supplying & fixing cats eye stud with moulded two shrank type made out from ASA styrene acrolonitrile injuction high compression moulding with reflector cube corner reflector design filled with tightly adhering polting compound s per ASTMD 788 size 11.5 cm x 7 cm x 1.6 cm) provided with bituminous adhesive with each unit for fixing. (High Intensity garade)

Tree Guard sign :- Providing and fixing sign board made of 2 mm alluminium sheet/ 3mm ACP (Alluminium Composite Panel) size 30 cms diameter circle plate as per attached drawing, pretreated with phospheting process & acid etching coated with one coat of epoxy primer and two coats of best quality epoxy paint, reflectorised with retro reflective sheeting as per latest M.O.S.T. specification, A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting .

Chevron sign boards for curve/ Village Name/ Bump Ahed Sign board:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 90x60 cm Rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.3 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Supplying and fixing road sign board of M.S. plates and angle iron including painting, lettering etc. complete including fixing in C.C. 1:4:8 with necessary excavation etc. complete as per I.R.C. type design.(ii) Reflective type

Direction (Junction) Signboard:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 244x122 cm Rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 4.0 mt long (2 Nos.) stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50x50x5 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Cautionary Warning/ Give way Signboard:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 90x90x90 cms equilateral triangle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of bestquality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.6 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Facility Informatory Signboard:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 80x60 cms rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of bestquality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.6 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Regulatory/Mandatory Signboard:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 60 cm Dia Circle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.6 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Stop Signboard:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 90 cm Dia Octagonal as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.6 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Distance Onformatory / Destination Signboard:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 180x120 cm Rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.6 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50x50x5 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Place Identification Signboard:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 150x90 cm Rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 4.0 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Sign board per Square meter:-Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 1 meter x 1 meter Rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 4.0 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50x50x5 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Route marker Signboard:-Providing and Fixing Sign Boards made out of 1.5 mm alluminium sheet/ 3 mm ACP (Alluminium Composite Panel) size 60x45 cm Rectangular plus 30x25 cm additional plate as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.6 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Hazard marker Signboard:-Providing and Fixing Sign Boards made out of 1.5 mm alluminium sheet/ 3 mm ACP (Alluminium Composite Panel) size 60x45 cm Rectangular plus 90x30 cms additional plate as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-II as per ASTM D-4956 and latest MOST Specifications, 3.6 mt long stand post of iron angle 75x75x6 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Diversion Ahed Sign board:- Providing and Fixing Sign Boards made out of 2 mm alluminium sheet/ 4mm ACP (Alluminium Composite Panel) size 180x60 cm Rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching, coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with micro prismatic grade retro reflective sheeting of type-11 as per ASTM D-4956 and latest MOST Specifications, 3.3 mt long stand post of iron angle 50x50x5 mm/ 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x35x3 mm, painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The Fixing at the site shall be in 1:2:4 CC Block of size 45x45x60 cm for each leg including excavation , curing etc complete under the supervision of engineer incharge. A warranty for 10 years for the retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor (A) Class-C Type-II Retro Reflective Sheeting.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slopes of I.S.458-1991 Class NP3 casted by vertically vibrated technology of following internal diameter. (i) 300 mm dia.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post 150 x 75 x 5 mm spaced 2 m c/c 1.80 m high, 1.1 m below ground/road level, on steel parts and treatments to be galvanized by hoy deep process all fittings to conform to IS-1367 and IS-1364 , metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm , 330 mm long complete as per clause 810.

Providing & laying 1.0 mt. wide barrier type central verge M-20 including casting of kerb of size 15.00 x 32.50 cm by mechanical kerb casting machinery and oil paint colour to central verge (Kerb) by Yellow/ White and black patta (three coat) one coat of priming & two coat of oil paint including cost of material required for paint and all labour work etc. complete as per direction, detailed drawing and instruction of engineer in charge (Including epoxy paint of approved quality central verge.

GPC Infrastructure Privet Limited

K KGUPTA CONSTRUCTIONS PVT. LTD.

SANKALP CONSTRUCTION

MS L G CHAUDHARY

M.S.Khurana Engineering Limited

Classic Network Pvt. Ltd.