WBPWD/EE/BED/e-NIQ-17/2025-26

Amount

Withdrawing all Old Electrical Equipment i.e Fans, Tube, DB's,& existing Etc. Handed over to the Authority and Refixing of VTPNDB at suitable place as per direction of EIC.

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 8 way Make:-Legrand Enclosure (607717)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+16 way Make:-Legrand Enclosure (607712)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 63 A FP Make:-Legrand

40 A DP Make:-Legrand

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. 6-32 A SP Make:-Legrand

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : upto 4 core 35 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 3½ core 35 sqmm cable

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. Average Run- 10 Mtr

Do-----Do--- On Board

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy.fittings as required a) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC( from TPNDB to SPNDB)

b) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC( from TPNDB to AC)

c) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (For power point& computer Point connection)

d) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC for 6A power point and beyond 10 mtr point wiring. .

Supply & Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i)6sqmm

ii)4sqmm

iii)2.5sqmm

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 6 Module

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supplying & Fixing Engage'/' Entry'/'Exit' LED board (1'X 1 /2.'.1)

Supply of OLP-3, 25A is a highly advanced microprocessor controlled starter used for ACs and other compressor loads. The time-tested combination of Voltcheck, Ampcheck & Timecheck ensures safe operation and long life of AC Compressors. [Make: Electron/Ultratech/Ultrasafe] OLP-3, 25A Starter.

Supplying & Fixing GI Modular Switch Board of the following sizes incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 4 module GI modular box for housing the OLP starter.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

S & F Timer Control unit for 1 Ph AC machines with 12-way SPN DB Box(Mk.- L & T /Crabtree/ kgrand/Siemens/ABB) 12 way SPN DB or Timer DB- 1 no 40A DP MCB Isolator-l no Digita 24 hrs.Time switch- 1 no 32A 2-pole power contactor-1no Centre off 2-way toggle switch-l no 32A Barrier type Terminal -l no LED indicating lamp-l no 2x4+1x2.5 Sq.mm Cu wire(Gloster /KELR.R Kabel) as per choice of EIC. (For 1.5 TR &2 TR single phase A.C. machine)

Supply & Delivery of 18 watt, LED surface mounted downlight(Squire/Round)(Warm White) Fiting having 6500K LED, luminous efficienry not less than 100Lm/watt Driver wattage should be greater than or equal to therated fiftings wattage incl. all accessories as required as per direction of ElC. [Make: Philips SM251/261 LED20S 6500 PSU WH/WIPRO LD06-221-XXX-57SMG1/CG as per Direction of EIC.

Supply and Delivery of 6W LED Spot Light,Warm White ( Make: Philips RS262B LED6S/865 PSU MBWH as per direction oI EIC]

Charges for cutting the ply/GI for fixing 6watt spot light as per direction of EIC.

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Supply & fixing of 4 to 5 watt Non-integral, flexibte LED strip light having 3000K LED witr high brightness, for indoor and outdoor applicadons. The strip can be cut at marked intervals to zuit the desired length Make: Philips 5 meter cove light with Driver/Crompton,wipro Equivalent As per choise of EIC. 5 Mtr Srip in each pack

Supply & delivery of Dowble LED light fitting(Make- Philips, Cat no-TMC 502 P 2XT-LED 22W P3242/ Wipro/ Havells) including 2 nos LED tube light ( make:Philips (TMC 501 1 X T-LED 22W with MAS LED Tube 1200mm 18W 865 T8I-21001m)/ Wipro/ Crompton/Wipro/Havells)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Delivery of 1200 mm sweep;52W; 370 rpm 210 cmm; 3 Star ac ceiling Fan complete with blades,canopy,fork rubber bush, Safety Wire & P2 Capacitor etc.( Make : Crompton Aura Prime Antidust/ Orient QuasarOrnamental/ Havells Eq)(Model & Colour are choosed as per direction of EIC)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG) With 25x25x3mm angle iron support

SITC of (1 -1.3 TR)(R32 2/3 star) Split type AC machines having cooling capacity range (3.4 kw to 4 kw), with fixed speed rotary compressor, refrigerant gas R32, BEE star rating-2/3 (EER range 3.5 to 3.99), Air flow range CFM (560-600), both condenser and cooling coils made of copper tube connecting chord with plug top confirming to IS 1391 (Part-I & Part-II) with all amendments (Make: Mitsubishi Electric- AGZISVF/ Mitsubishi Heavy- SRK20CXS-W6/ O General- ASGAISIIMWA-B (R32) (As per choice of EIC) (For Server Room)

SITC including vaccumiazation and Nitrogen of testing of following nominal size of soft/hard drawn copper refrigerent piping Split AC system, complete with fittings and including accessories, insulated with XLPE class -O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specification etc. as required. 1/4" (6.4 mm) dia (Soft drawn) Cu. Pipes (As per standard 85864 or ANSIB 16.22) incl. 19 mm thick insulation.

5/ 8" (15.88 mm.) dia (Soft drawn) Cu. Pipes (As per standard BS864 or ANSIB 16.22) mm incl. 19 mm thick insulation.

Supply and laying of 1.1 kV grade copper unarmoured round cable of 3 core 2.5 sq. mm from IDU Unit to ODU Unit for the above mentioned AC Unit.[Make:- Polycab/Havells/Gloster/Finolex/KEI/RR Kabel/As per choice of EIC]

Supply and laying PVC Drain Pipe 25mm dia with 6 mm thick Nitrile Rubber Insulation. [Make:- Suprime/Oriplast]

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage for AC installation, per storey of building per vertical run.

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

FAIRWAY ENTERPRISE (BID ID -6432348)

JOY MA TARA ELECTRICAL CO. (BID ID -6459336)

OVERSEAS TRADING AND SUPPLIES CORPORATION (BID ID -6456324)