Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC | L1 | Accepted-AOC ok | |
| 2 | L2₹24.7 L+₹1.1 L (4.86%)Rejected-AOC | L2 | Rejected-AOC ok | |
| 3 | L3₹27.1 L+₹3.6 L (15.2%)Rejected-AOC 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L3 | Rejected-AOC ok | |
| 4 | L4₹28.2 L+₹4.7 L (19.8%)Rejected-AOC 35 A 60 RAMPUR GARDEN BAREILLY UP | BAREILLY | BAREILLY | UP | L4 | Rejected-AOC ok | |
| 5 | L5₹28.8 L+₹5.2 L (22.2%)Rejected-AOC 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L5 | Rejected-AOC ok |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
25 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
PROVN OF CERTAIN SANCTIONED WORKS UNDER AGE B/R- I AT GE WEST BAREILLY
2022_MES_540632_1
8075/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST BAREILLY
SCANNED COPY OF ENLISTMENT LETTER IN MES IN RELEVANT CLASS CATEGORY SCANNED COPY OF APPLICATION ON LETTER HEAD OF FIRMSCAN COPY OF DD OF RS 500.00 IN FAVOUR OF GE WEST BAREILLY FROM ANY NATIONALISED OR SCHEDULED BANK SCANNED COPY OF REGISTRATION
6 documents required · 6 mandatory
₹500
Yes
GE WEST BAREILLY
₹80,000
Yes
19 Sept 2022
25 Jul 2022
27 Aug 2022
25 Jul 2022
25 Aug 2022
10 Aug 2022
25 Jul 2022 - 8 Aug 2022
Amount
Surface excavation in soft/loose soil n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified & directed.
Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, in soft/loose soil and getting out complete all as specified & directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.
S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified.
Formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns complete all as specified and directed.
M & L formwork to sides and soffits of lintels,lintel bend, roof beams etc finished rough surfaces of concrete complete all as specified.
Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.
Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.
M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in foundation, footing, plinth beam, base of columns etc all as specified and directed.
M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in columns, pillars, piers, post and structs etc all as specified and directed.
M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in roof Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified and directed.
M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in slab, shelves etc.all as specified and directed.
M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in chajja, landings, balconies, canopies, deck slabs and in shelves and the like etc.all as specified and directed
Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified.
Removing excavated soil exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.50m above the starting point complete.
M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.
M & L hardcore of broken stone or boulders of gauge n.exc.63mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface.
M & L 75mm th PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and fair smooth w/o using extra cement incl forming and filling expension joint with bitumin filler , complete all as specified.
M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive tile work complete all as specified and directed.
S&F powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed. Jindal/ HINDALCO/ INDALCO ( Shape and size of section will be approved by GE/as per Drg) Note ;cost of rubber and required accessories shall be included in the rate of item and shall not be paid extra.
S&F powder coated aluminium door shutters of any colour,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,powder coated aluminium snap beading screws etc. complete all as specified and dirceted by Engr-in charge.(Thickness or powder coating not less than 50 micron and glass shall be measured and paid sepetarly).
S&F Tinted sheet glass 5.5mm thick, pin head type in squares exc 0.5 sq. m in each pane in Aluminium window,door and partition wall complete all as specified and directed
M&L for double action floor door spring, hydraullically regulated, made out of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel, heavy duty and fixed complete all as specified and directed.
S&F Factory made PVC single door frame of size 50x47mm with a wall thickness of 5mm plain colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 150 of SSR 2004 part-II. The door frame to be fixed to the wall using MS screw 75mm long with PVC fastener complete as per manufacturing, instruction and as specified.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.
S&F 150 mm size aluminium handles, cast type anodised completed all as specified and directed.
M & L figured sheet glass ordinary quality 4mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified.
M&L Fly ash brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified.
M&L Fly ash brick work with sub class'B' bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.
M&L 40mm thick PCC 1:2:4 (type B-0) for damp proof course to horizontal or vertical surfaces including necessary formwork
Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.
M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.
M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)
M & L rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified
Supply only water proofing compound
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), emoving serviceable tiles to store and rubbish off the premises complete as directed and specified.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) area of each tile in floors etc.area of each tiles exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 15 mm thick screed plaster in CM 1:6 complete all as specfied and directed.
M&L glazed ceremic colour tiles in vertical surfaces 450x350x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick rendering in CM (1:4) complete all as specfied and directed.
S&F 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls.
S&F for 110mm PVC (SWR) bends any radius
Taking up or down steel tubing and connection of 15 mm bore tube of any description & in any position complete all as specified and directed.
Taking up or down steel tubing and connection of 20 mm bore tube of any description & in any position complete all as specified and directed.
S&F GI tubing 15mm medium grade with all fitting and fixed complete to walls & ceiling or laid in floors,bore of pipe 15mm dia all as specified (Make Tata/Jindal/JCT(ISI marked)
S&F GI tubing medium grade with all fitting and fixed complete to walls & ceiling or laid in floors,bore of pipe 20mm dia, all as specified (Make Tata/Jindal/JCT(ISI Marked)
S&F 40 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ sqcm fixed complete to walls ceilings or in floors etc.
S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed
S&F for vitreous china squatting pan “ORISSA” Pattern size 580x440mm white with integral foot rests complete all as directed by Engr-in-Charge
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete all as directed by Engr-in-Charge
S&F PVC low level cistern 10 Ltr cap with inlet ball valve, float and handle incl bracket and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern.
S&F PVC connections 15mm size with PTMT nuts of length 450mm.
S & F for chromium plated stop valves/Angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and as directed.
S&F brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.
S&F in Vitreous China table top wash basin of suitable size including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and as directed.
S&F for fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed.
S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with cp railing fixed with fancy type screws complete all as specified and directed.
S&F PVC waste pipe for wash basin & Urinal with complete all as specified.
S&F 15mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges including brackets complete all as specified.
M&L 16 to 20 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc over a screed bed of 15 mm 1:6 C:M complete all as specified and directed
M&L CI floor trap 75mm with grating incluing jointing to waste pipe fixed in cement concrete type B1 (1:2:4)
Dismantling of water tanks capacity n exc 500 ltrs complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks(tripple layer and white in colour) of 500 Litre capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.
ditto as per above, capacity of water tank exc 500 ltr but not exc 1000 ltr incl dismentling.
S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms).
S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed.
Dismantling of cast iron/ PVC /AC /SGSW pipes alongwith fittings and accessories 75/100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.
M&L salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing complete all as specified & directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to sewage pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWG pipe complete all as specified & directed.
Cutting into existing manholes for concrecting new drains making good to pipe and rendering, cutting out existing benching for and forming brach channel (1/2 Round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reformed bending as required internal dia of pipe 150mm.
M&L for applying 2 mm thick wall care putty on wall/ceiling icl rubbing down with sand paper to make surface even and smooth complete all as specified and directed.
Material and labour for preparation of new plastered or pointed surface of walls/pillars/cornices by brooming down or by sand papering or by any other mean and after preparing the surfaces applying two coats of cement base paint as approved tint/colour complete all as specified.
M&L two coat of cement base paint on old plastered wall surfaces of any description including preparation of surfaces, complete all as specified and directed.
M&L for applying two coats of oil bound distempering over one coat priming (chalk whitening) on new plastered surfaces,including preparing surface, complete all as specified and directed by Engineer-in-Charge
M&L for applying two coats of oil bound distempering over one coat priming (chalk whitening) on Old plastered surfaces,including preparing surface, complete all as specified and directed by Engineer-in-Charge
Material and labour for preparation of new plastered or pointed surface of ceiling by brooming down or by sand papering or by any other mean and after preparing the surfaces applying three coat of white wash as approved tint/colour complete all as specified.
M&L for preparing old plastered surfaces and applying one coats of white wash on wall/ceiling complete all as specified and directed.
Material and labour for preparation of new/previously treated steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :- cutting into existing manholes for concrecting new drains making good to pipe and rendering, cutting out existing benching for and forming brach channel (1/2 Round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reformed bending. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed. (b) applying a coat of Aluminium paint @ 0.20 Litres per Sqm complete as per manufacturer's instructions
M & L for 75mm thick Plain Cement Concrete, type D-2, 1:4:8 mix (using 40 mm graded stone aggregates) as in sub base complete all as specified and directed.
M& L for providing Cement concrete chequred tiles 25cm x 25cm x 22mm thick, machine pressed; set in CM 1:4, 20 mm thick screed bed jointed and pointed in neatcement slurry in floors, and cut complete all as specified and directed
Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.
M&L for vitrified Ceramic tiles light shade coloured 10mm thick (square/rectangular) polished, area of each tiles exec 0.16 sqm and not exceeding 0.36 sqm (600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and witn 15mm thick screed bed in CM 1:6 complete all as specified and directed
All as per serial item as above but as in vertical surfacesincluding rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed.
S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) each shutter complete all as specified and directed. (Glass shall be measured and paid sepeterly)
S&F Aluminium grill with Bulb height 4.5 mm square shape fixed on frame including necessary fixing arrangement like U-clip, flat Aluminium section maching with window & dia of grill as directed by Engr-in-Charge.
S&F, Galvanised stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire stapples complete all as specified as directed.
M&L in repairs 4 mm thick E board classic (everest /equivalent) tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed.
M&L providing BRAND FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge
M&L in providing 30 mm thick brand factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing
S & F in repairs Vitreous China wash basin with pedestal white , flat back, size 580x450 including , waste coupling brass,waste pipe, chain and plug and porcelain stopper brackets complete all as specified and directed.
S&F Grating round 150 mm stainless steel with or without waste hole all as specified and as directed by Engr-in-charge.
M & L for 25 mm thick PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab where required/directed by Engr-in-Charge after applying cement slurry for filling undulationations/ level course finished even and smooth without using extra cement complete all as spd and directed.
M&L for rendering on roof, vertical parapet wall, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement including application of cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed. Note:- Water proofing liquid shall be measured and paid separately.
S&F in repair 20 mm dia SS 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate size in each end & intermediate support complete all as specified and directed.
Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings sheeting, any gauge,thickness,nincluding Nainital or similar pattern roof coverings complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc according to Fe-410- W(Gde- E-250) quality- B complete all as specified.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, L- type or J -type hooks or cranked bolts and bitumen washer or fixed with self tapping screws including dismantling of old AC sheet complete all as specified.
S&F for 0.63mm thckness plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed.
S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick tinted/sheet glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below, and following items deemed to include- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) Aluminium grill with Bulb height 4.5 mm square shape fixed on frame including necessary fixing arrangement like U-clip, flat Aluminium section maching with window & dia of grill as directed by Engr-in-Charge. (v) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (vi) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vii) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
S&F stainless steel plate rack of overall size 31" x 30" x 10" made with 0.63 mm stainless steel thick sheet complete all as specified and as direcetd. Make-Bluestar, Sliver shine, Nirali
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x420mm bowl size 410mm x 330mm x 160mm complete all necessary fittings all as specified and as directed.
S& F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed
S&F Mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc, with ends of bars shouldered and or rivited or forged into spikes and similar work confiring to Fe 290 Gde E-165 complete all as specified and as directed.
S&F Rolled Mild Steel framed work as in chowkhat, doors or gates of angle or other section confirming to Fe 410-S, with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering and handing or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing incuding dismantling old steel work complete all as specified and directed.
S&F Factory made 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel to 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial vaneering on both faces. The size of rail and stile as per IS : 1003 (Prt I), kiln seasoned.
S&F Mild steel chromium plated peg set of 06 Nos of hooks complete all as specified and directed
S&F soap dish, brass chromium plated fixed to wall complete all as specified and directed
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ringjoints laid in trenches or in floors complete all as specified and directed
S&F 110 mm PVC (SWR), Junction single, (Single T) equal or un equal ), fixed with solvent cement with oval acces door complete all as specified and directed
S&F 75 mm PVC (SWR) bends any redius complete all as specified and directed
Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.
M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed for the following :-
(a) One light/fan point controlled by one switch
(b) One 3 pin, 5 Amps, socket outlet on the same board, controlled by another switch.
(c) One multi pin socket outlet, 5 Amps, on Independent board.
S&F, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed
S&F, Socket outlet 5 Amps complete all as specified and directed
M & L for ceiling fan regulators, Electronic steped type, AC, 230 Volts complete all as specified and directed.
S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed
S&F, in repairs, sheet metal distribution board, SPN, 4 way 240 Volt, single door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.
S&F, in repairs, miniature circuit breakers, type curve ‘B’ , 10 KA, SP, 6 to 32 Amps complete all as specified and directed.
S&F, in repair, miniature circuit breakers, SPN, type curve‘C’ 10KA, 32 Amps, 240 Volts. complete all as specified and directed.
S&F, in repairs, LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size complete all as specified and directed.
S&F, in repairs, LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size complete all as specified and directed.
Supply and Fix Deco type round light incl LED lamp 7 watt complete all as specified and directed.
Supply and Fix in repair Building security light fitting LED type of capacity 25 watt incl bracket/clamps and nut bolts as required for fixing in wall of suitable size and length of bracket not less than 1.2 mtr complete all as specified and directed.
M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc all as specified and directed .
Taking down Ceiling Fan of any size and place in safe custody by the contractor complete all as specified .
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Supply ,Laying and testing cable XLPE Insulated ,screened ,PVC bedded ,galvanised steel strip or wire armoured ,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.
Rewinding of ceiling fan with copper wire incl replacemement of bearing ,greasing and painting with white paint complete all as specified and directed.
M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying of cable in trenches, punning complete all as specified and directed Note:- Punning thickness of 18 cm will be considered for payment.
Supply and laying sub class old 'B' burnt bricks, size of brick 230x115x75mm, laid as cable protection cover complete all as specified and directed.
S&F, galvanized, steel water tubes, medium grade of dia 40 mm with all fittings, laid in trenches /wall complete all as specified and directed.
Supply and Fix Bulk Head Fittings LED type incl Lamp complete all as specified and directed.
Supply and fix Exhaust Fan Metal Body AC single phase 230/240V of size 300 sweep with frame ,blades, with louver complete all specified and directed.Note :-cutting of wall included in quoted rate and cost of louver incl in quoted rate.
M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed.
S&F, switch piano, flush button, single pole, one way 15 Amps complete all as specified and directed
S&F, Socket outlet 15 Amps complete all as specified and directed
S&F, in repairs, sheet metal distribution board, SPN, 8 way 240 Volt, single door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.
Taking down exhaust fan of any capacity and rewinding of Exahaust Fan with copper wire incl replacement of bearing ,greasing and painting with white paint and re installation,testing complete all as specified and directed.
M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire including making good the disturbed surfaces of wall by using putti and matching with existing color complete all as specified and directed for the following :-
(a) One light/fan point controlled by one switch
(b) One 3 pin, 5 Amps, socket outlet on the same board, controlled by another switch.
(c) One multi pin socket outlet, 5 Amps, on Independent board.
M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire complete all as specified and directed.
S&F, Modular switch 1 way 6 Amps,1 module complete all as specified and directed
S&F, Modular Socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed
S&F, Modular switch 1 way 16 Amps,1 module complete all as specified and directed
S&F, Modular Socket 6/16 Amps 2/3 pin combined 2 module complete all as specified and directed
S & F fan regulators modular type,2 module complete all as specified and directed.
S & F White cover plate with frame 2 module complete all as specified and directed.
S & F White cover plate with frame 3 module complete all as specified and directed.
S & F White cover plate with frame 4 module complete all as specified and directed.
S & F White cover plate with frame 8 module complete all as specified and directed.
S & F Metal flush box 2 module complete all as specified and directed.
S & F Metal flush box 3 module complete all as specified and directed.
S & F Metal flush box 4 module complete all as specified and directed.
S & F Metal flush box 8 module complete all as specified and directed.
S&F, in repairs, sheet metal distribution board, SPN, 12 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.
Notes :-
REHAN CONSTRUCTION
R K CONSTRUCTION
M/S Shree Sai Builders
SANJEEV ENTERPRISES
Harsha Consultant and Builders
JAI SRI RAM ASSOCIATE
RIYASAT ALI KHAN
Jain construction co
VISHAL CONSTRUCTIONS
Akhil Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .