Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹28.6 L+₹1.4 L (5.28%)Rejected-Finance BAM GAON SILAPATHAR DIST DHEMAJI ASSAM | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹29.0 L+₹1.9 L (6.87%)Rejected-Finance NADUA GAON POST NADUA DIKOM DIST DIBRUGARH ASSAM 786 101 | DIBRUGARH | DIBRUGARH | ASSAM | 786101 | L3 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 4 | L4₹29.5 L+₹2.3 L (8.50%)Rejected-Finance NOT AVAILABLE | L4 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 5 | L5₹30.0 L+₹2.8 L (10.5%)Rejected-Finance BORBARUAH BAZAR A T ROAD DIBRUGARH ASSAM | L5 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹29 L
EMD Value
₹58,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJ JP SAHOO
GE 872 EWS, C/O 99 APO
ADDN ALTN AND IMPROVEMENT TO BLDG NO. T-107 AND T-108 COOK HOUSE OF BDE CAMP, PROVN OF STORE ROOM NEAR BLDG NO. T-27 AT ALONG AND PROVN OF CERTAIN MINOR WORKS AT DIFFERENT LOCATION OF ALONG MIL STN UNDER GE 872 EWS
2022_MES_529832_1
8435/T-35/E8
Open Tender
Miscellaneous Works
Item Rate
243 days
ALONG
All as per NIT and Tender documents
7 documents required · 7 mandatory
₹500
Yes
GE 872 EWS
₹58,000
Yes
8 Oct 2022
9 Jun 2022
28 Jul 2022
9 Jun 2022
27 Jul 2022
15 Jul 2022
9 Jun 2022 - 16 Jun 2022
Amount
B/R SERVICES/WORKS
Demolition Cement Concrete (Un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed
Demolition Cement Concrete (Reinforced) of any description and in any Position not otherwise specifically provided for and Removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.
Demolition Brick Work or Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.
Dismantling Timber Scantling 40 Sq Cm and Over in Section in Unframed Work, complete all as specified and as directed.
Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.
Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame), exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.
Taking down/out Unserviceable Rusted/Worn out Wire Cloth/Netting of any description, fixed with Beads, etc., complete all as specified and as directed.
Hacking/Taking out Broken Glass of any description from Wooden or Metal Frames, or Stone, Concrete or Brick surrounds of any thickness or size; Hacking out Old Putty or Removing Beads, etc., complete all as specified and as directed.
Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness, Seggregating Serviceable Sheeting and Keep in Safe Custody for Refixing / Reuse, complete all as specified and as directed.
Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as as directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.
Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc to a distance not exc. 100.00 Metre, complete all as specified and as directed.
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and Removing Debris, etc. etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.
Excavation Over Areas, not exc. 1.50 Metre in depth and getting out in Soft /Loose Soil, complete all as specified and as directed.
Excavation Over Areas, exc. 1.50 Metre but not exc. 3.00 Metre in depth and getting out in Soft /Loose Soil, complete all as specified and as directed.
Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.
Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/ Loose Soil, complete all as specified and as directed.
Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.
Excavating in Post Hole (or Similar Hole) in Soft/Loose Soil, Each Post Hole not exc. 0.50 CUM, getting out, Returning, Filling in and Ramming Earth or Broken Rubble mixed with Earth around in layers not exc. 25 Cm, Watering and Removing Surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed.
M&L Gravel (as approved) Filling under Floors, Foundations, etc. including Spreading and Levelling, etc., complete all as specified and as directed.
M&L Hardcore broken Stone or Boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True surface, complete all as specified and as directed.
M&L Treating the Bottom and Sides of Excavation at the Rate of 5.0 Litre of Emulsion Per Square Metre of Surface Area, complete all as specified and as directed.
M&L Treating the Top Surface of Filled Earth at the Rate of 5.0 Litre of Emulsion Per Square Metre of Surface Area, complete all as specified and as directed.
M&L Treating the Soil under Plinth Protection at the Rate of 5.0 Litre of Emulsion Per Square Metre of Surface Area, complete all as specified and as directed.
M&L Treating the Soil along with External Perimeter of Building at the Rate of 2.25 Litre of Emulsion Per Metre of the Perimeter Wall, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 600mm in Height, Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs and the Like including Weathering, Slightly Rounded or Chamfered Angles and Throating, Finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deem to include in the Quoted Unit Rate.
M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. for Columns, Pillars, Posts & Struts, Manholes, etc. including all necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork will deem to include in the Quoted Unit Rate.
M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork will deem to include in the Quoted Unit Rate.
M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Beams, Cantilevers, Bressummers, Lintels Over 1.50 Metre Span and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.
M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landing, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.
M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Chajjas and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.
M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Morter 1:4, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appro-priate Items.
M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunchings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.
M&L Formwork to Chajjas, Chullah Hoods, Troughs and Similar Items including Edge, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.
M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks of in Sizes 300x200x200mm or 300x200x100mm, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and Setting in Cement Mortar 1:6, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including Use & Waste of Formwork and Applying evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed.
M&L Cutting Holes in Brick Walls, not exc. Half Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs, etc. and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.
M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed.
M&L Second Class Hardwood (well seasoned) Panelled Shutter 35mm thick (any number Panels) Plain, Framed with Lock Rails, having Panels of 12mm thick Veneered Particle Board medium density, Wood Particle Board with commercial Face Veneers and fitted to Chowkat, complete all as specified and as directed.
M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars), Edges of Framing plain, chamfered or rounded. fitted with cut and mitred Beads for securing glass, etc.; sizes of Members of Shutters as specified in SSR Part I, Section 8, Clause 8.24(a) and fitted to Chowkat, complete all as specified and as directed.
M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Divided into Squares, with plain, chamfered or rounded, mitred and rebated Sash Bars to receive Gauge/Glass, any numbers, sizes of Members of Shutter as specified in SSR Part-I, Section 8, Clause 8.24(b) and fitted to Chowkat, complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule, complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28mm to 30mm thick (Stiles), with 2, 4, or 6 Raised Panel design with 2.0mm thick Moulded PVC Sheet on the Front Face and 2.0mm Plain Colour PVC Sheet on Back Face, with Particle Board Core and fixing in Frame at Site as per Specifications & Drawing of MES Schedule, complete all as specified and as directed.
M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Frame for Doors, Windows, Ventilators with One or More Rebates including Joining Cleat for fixing, etc., complete all as specified and as directed.
M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Door Shutters, Aluminium Section weighing not less than 0.55 KG/RM including necessary Joining Cleats, Glazing Clips, Rubber/ Neoprene Packing, Handles (as approved) - 2 No. in Each Door, Stainless Steel Hinges of Size as ordered, anodised Aluminium Snap Beading, Screws, etc, complete all as specified and as directed. NOTE : Cost of Aluminium Fittings/ Builders Hardware as metioned here-in-above will deem to include in the Quoted Unit Rate.
S&F Steel Windows with Side Hung Shutters including Projecting type Hinges with Steel Handle and Steel Peg Stay, complete with Glazing Bars, dovetailed or welded, complete all as specified and as directed.
S&F Aluminium anodised Barrel Tower Bolt 150mm long (as approved), Extruded Section and Fixed, complete all as specified and as directed.
S&F Aluminium anodised Barrel Tower Bolt 150mm long (as approved), Extruded Section and Fixed-in-repairs, complete all as specified and as directed.
S&F Aluminium anodised Barrel Tower Bolt 200mm long (as approved), Extruded Section and Fixed, complete all as specified and as directed.
S&F Aluminium anodised Barrel Tower Bolt 200mm long (as approved), Extruded Section and Fixed-in-repairs, complete all as specified and as directed.
S&F Aluminium alloy, anodised, Sliding Door Bolt 300mm long (as approved) with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and Fixed, complete all as specified and as directed.
S&F Aluminium alloy, anodised, Sliding Door Bolt 300mm long (as approved) with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and Fixed-in-repairs, complete all as specified and as directed.
S&F Stainless Steel Butt Hinge (as approved) 75mm in Size, complete all as specified and as directed.
S&F Stainless Steel Butt Hinge (as approved) 100mm in Size, complete all as specified and as directed.
S&F Aluminium Handle 100mm, anodised, Fabricated type (as approved) and Fixed-in-repairs, complete all as specified and as directed.
S&F Aluminium Handle 150mm, anodised, Fabricated type (as approved) and Fixed, complete all as specified and as directed.
S&F Aluminium Handle 150mm, anodised, Fabricated type (as approved) and Fixed-in-repairs, complete all as specified and as directed.
S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and Fixed-in-repairs, complete all as specified and as directed.
S&F Brass Mortice Lock, Vertical type of size 100mm, 4 Levers, complete all as specified and as directed.
S&F Floor Door Stopper having Overall length of Cover Plate 140mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixing in Floor and Fixed, complete all as specified and as directed.
S&F Floor Door Stopper having Overall length of Cover Plate 140mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixing in Floor and Fixed-in-repairs, complete all as specified and as directed.
S&F Door Closer Aluminium alloy (Extruded Section) Body, Hydraulically Regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in Width and of Weight between 61.00 to 80.00 KG, complete all as specified and as directed.
S&F Stainless Steel Drapery Rod (Curtain/Harrison Rail) having 1.0mm Wall thickness and 24mm Outer dia, fixing with and including Brackets, Stops, Rollers, Side Holders, etc, and Fixed-in-repairs, complete all as specified and as directed.
M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.
S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.
S&F Sheet Glass 5.5mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.
S&F Solar Control Film 25 Micron Reflective Type Sticked to Glass Panes of any size and thickness as per Instructions of Manufacturers, complete all as specified and as directed.
M&L TMT Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.
M&L TMT Bars 8.0mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.
M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.
M&L Mild Steel Round Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.
M&L Mild Steel Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes including Bolts, Hooks (Stay) for large Gates; Hook and Pintle Hinges: large Hasps and Staples; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties and similar small Articles conforming to Fe-290 Gde-E-165, complete all as specified and as as directed.
M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors: Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.
M&L Mild Steel Tublar Trusses, Rafter, Purlins, etc. including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed.
M&L Plates (Plain or Chequered) Channels, Square cut or notched (Ordinary and Counter Sunk) forming Holes, without any attachment, conforming to Gde Fe-410-W (Gde E-250) Quality 'B', complete all as specified and as directed.
M&L Mild Steel Screw Bolts (machine made) of any description or size, with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed.
M&L Running Welding in Repairs in Steel Works, thickness of metal to be welded not exc. 6.0mm, complete all as specified and as directed.
S&F Corrugated Mild Steel Sheeting 0.63mm thick, Galvanised @ 275 Gram Per Sqm, with Two Corrugation Side Lap, fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed.
M&L Refixing only Corrugated Mild Steel Sheeting 0.63mm thick (except Sheets, Serviceable Sheet obtained from BOQ Item No. 1.009 here-in-before) with Two Corrugation Side Lap, fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed.
S&F Plain Mild Steel Sheeting 0.80mm thick, Galvanised @ 275 Gram Per Sqm, in Ridges, Hips, Valley Gutters, etc., fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed.
M&L Refixing only Plain Mild Steel Sheeting 0.80mm thick (except Sheets, Serviceable Sheet obtained from BOQ Item No. 1.009 here-in-before) in Ridges, Hips, Valley Gutters, etc., fixing with and including L-type or J-type Cranked Hook Bolts with Washer, etc., complete all as specified and as directed.
S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.
S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.
S&F PVC Wall Paneling (Water Proof) 10mm thick, Decorative Laminated of Surface Finish, Coloured and Pattern as Approved and Fixed with Adhesive Materials as per Manufacturers Instructions, complete all as specified and as directed. NOTE : The Quoted Unit Rate is inclussive of Cost of Ahesive Materials and All Necessary Frame Work as required/ Ordered at Site of Work.
S&F PVC Board (Water Proof) in Ceiling 10mm thick, Decorative Laminated of Surface Finish, Coloured and Pattern as Approved and Fixed/ Framed with necessary Grids/ Bars of Similar Colour as per Manufacturers Instructions, complete all as specified and as directed. NOTE : The Quoted Unit Rate is inclussive of Cost of Ahesive Materials and All Necessary Frame Work as required/ Ordered at Site of Work.
M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles, etc., Maintaining Level Uniformly, finished Concrete Surfaces Fair and Even, complete all as specified and as directed.
M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rect-angular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.
M&L Glazed Ceramic Coloured Tiles 300x200x6.0-7.0mm thick (1st quality) conforming to IS:13753, in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.
M&L Glazed Ceramic Coloured Tiles 300x450x6.0-7.0mm thick (1st quality) conforming to IS:13753, in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.
M&L Machine Cut Granite (of any type) Work 20mm thick (Table Rubbed and Polished) in Steps, Jambs, Pillars, Window Cills, Cooking Platforms and like in Cement Mortar 1:4 including Pointing in White Cement 1:2, using Marble Dust with Admixture of Pigment to match with Shade of Granite, fixing over and including Cement Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.
M&L Machine Cut Kota Stone Slab 18-22mm thick in Flooring, etc., laid over 20mm thick Screed base in Cement Mortar 1:6, laid and joined with Grey Cement Slurry mixed with Pigment to match the Shade of the Slab including necessary Cutting, Rubbing and Polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.
M&L Machine Cut Kota Stone Slab 18-22mm thick in Riser of Steps, Skirting, Dado and Pillars, laid over 15mm thick Screed base in Cement Mortar 1:4, laid and joined with Grey Cement Slurry mixed with Pigment to match the Shade of the Slab including necessary Cutting, Rubbing and Polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate.
M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.
M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Rendering (External) 15mm thick on Brick/PCC Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixeing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured and Paid sepa-rately under appropriate Item.
Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.
M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.
M&L Preparing Old Treated Plastered Surfaces of Walls and applying One Coat of White Wash, complete all as specified and as directed.
M&L Preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (as approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed.
M&L Preparing Old Treated Surfaces of Walls and applying One Coat of Cement Based Paint (as approved Tint), complete all as specified and as directed.
M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.
M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint), complete all as specified and as directed.
M&L Preparing Steel and Iron Surfaces of any descriptions, over exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L Preparing previously Untreated Surfaces of Wood and Wood Based Materials, of any description and girth not otherwise described and Treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed.
M&L Preparing previously Untreated Surfaces of any description and girth not otherwise described and Treating with Tar or Coal Tar Black Paint to Holdfast or similar Small Items, Area tarred not exc. 0.10 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed.
M&L Stencil Writing Letters or Figures (Block. Roman, Italic or Indian) of height exc. 150mm and not exc. 200mm with White Synthetic Enamel Paint over Black Base Surfaces, complete all as specified and as directed.
M&L Stencil Writing Stops, Commas, Short Lines, Dashes, Hyphens, Brackets, etc. with White Synthetic Enamel Paint over Black Base Surfaces, complete all as specified and as directed.
S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.
S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.
S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fency type, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.
S&F Pillar Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, with Capstan Heads, screwed down high pressure, with or without Lettered 'Hot' or 'Cold' with Long Screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed.
S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.
S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.
S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed.
M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule, complete all as specified and as directed.
S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.
M&L Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, PVC (SWR) ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed Surfaces, complete all as specified and as directed.
M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted, including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.
S&F Vitreous China White Wash Hand Basin 600x480mm in Size, Flat Back with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32/40mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets/ Erecting Stand duly Painted, Cutting and Pinning in Ends and Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.
S&F PTMT Bottle Trap 40mm bore (dia) having (Minimum Weight 270 Grams) and Minimum Water Seal of 25mm suitable for Wash Hand Basins with Inlet and Outlet, screwed for Pipe or Connections including necessary Packing, Uunion, Cap, complete all as specified and as directed.
S&F High Density Polyethylene Pipes (HDPE) 40mm bore (dia) of Pressure ratings 6.0 Kg Per Sq Cm and fixing to Walls, Ceiling or in Floors, etc., complete all as specified and as directed.
S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for connecting with Flushing Cistern, Wash Hand Basin, etc., complete all as specified and as directed.
S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats, complete all as specified and as directed.
S&F Chromium Plated Shower Rose with Shower Arm 125mm, Swival Joint including fixing to Steel Pipe, complete all as specified and as directed.
S&F PVC (SWR) 75mm bore (dia) Floor Trap having Diameter of Outlet 75mm, Plain with Grating including Jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid in Floors, complete all as specified and as directed.
S&F PVC (SWR) Vent Cowl 75mm bore (dia), jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid separately under appropriate Items here-in-before.
M&L Cutting into existing Manholes for Connecting New Drain Pipes of 160mm (Internal dia), Making Good to Pipe and rendering, cutting out existing Benching for and forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), smooth finished and reforming Benching as required, complete all as specified and as directed.
B/R SERVICES/WORKS
M&L Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any Position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets but excluding Light Fittings of any description, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including providing Surface Treatment (White/Colour Washing, Distemper-ing, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.
M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN/ BELL POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.
M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 3 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed.
M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.
M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.
M&L Sub-main Wiring with 2-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping of suitable Size (25/32mm Width), ISI Marked along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cables & 1-Run of PVC Casing Capping shall deem to be included in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wires required for looping, etc. as ordered will deem to be included in the Quoted UNIT RATE.
S&F Rigid Non-metallic PVC Conduit of Size 20mm (External Dia) exclusive of Boxes (Junction/ Terminal) but inclusive of all Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends and Fixing Accessories such as Couplers, Lock Nuts, Saddles, Pipe Hooks, etc., complete all as specified and as directed.
S&F PVC Rectangular Board of Size 350x300x50mm deep, Closed Recessed with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc. including Taking down/ out Unserviceable PVC Board, complete all as specified and as directed.
S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Unserviceable Switch Piano (28.00 No. only) obtained from Taking down of Point Wiring will be considered under Schedule of Credit.
S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.
S&F Socket Outlet 6 Amp, 5 Pin, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Unserviceable Socket Outlet (06.00 No. only) obtained from Taking down of Point Wiring will be considered under Schedule of Credit.
S&F Switch Socket Combination 6/16 Amp (3 Pin & 3 Pin), Multi-purpose type, 2-in-1, 230 Volt AC, complete all as specified and as S&F Socket Outlet 6 Amp, 5 Pin, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Unserviceable Switch Socket Combination (04.00 No. only) obtained from Taking down of Point Wiring will be considered under Schedule of Credit.
S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as S&F Socket Outlet 6 Amp, 5 Pin, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Unserviceable Ceiling Rose (18.00 No. only) obtained from Taking down of Point Wiring will be considered under Schedule of Credit.
S&F Angle/ Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and Connecting up, complete all as specified and as directed. NOTE : Unserviceable Angle/ Lamp Holder (02.00 No. only) obtained from Taking down of Point Wiring will be considered under Schedule of Credit.
S&F LED Lamp 15 Watt, 230 Volt (as approved) Volt, Self-ballasted and fixing to existing Light Fitting, complete all as specified and as directed.
S&F Decorative LED Light Fitting 1x9 Watt/ 1x10 Watt Bulkhead Luminaires including LED Light, Driver, Holder, Connecting up with 3 Core Flexible Copper Conductor Cable of suitable Size including Taking down/out Unserviceable Light Fitting, complete all as specified and as directed.
S&F LED Tube Light Fitting 1x20 Watt with 20 Watt Inverter LED Batten with Square Profile and Polycarbonate Channel having Lithium Ion Battery with Charging Time 8 Hour to 10 Hours and Backup Time upto 4 Hours and Connecting up with 3 Core Flexible Copper Conductor Cable of suitable Size, complete all as specified and as directed.
S&F LED Tube Light Fitting 1x20 Watt, T-08 complete with 20 Watt T-8 LED Batten/ Rod and mounted on 2 No. PVC Box suitable for fixing of Tube Light Fitting, Connecting up with 3 Core Flexible Copper Conductor Cable of suitable Size including Taking down/out Unserviceable Light Fitting, complete all as specified and as directed.
M&L Taking down Ceiling Fan of any Make/Model/Sweep from any Height after disConnecting Electric Connection and Keep in Safe Custody for Re-hanging/ Re-fixing and Repairing, complete all as specified and as directed.
M&L Opening Ceiling Fan body in presence of JE-in-Charge, Checking for Repair Works involving, Transporting Ceiling Fan 1200mm Sweep from AGE E/M Store Yard at ALONG to nearest Workshop, Taking out carefully burnt out Winding of any type from the Fan of any Make, Cleaning of Slots, Rewinding Fan Motor with Super Enamalled Copper Wiinding Wire of suitable Gauge and Weight (not less than 350 Gram) providing New Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.
M&L Preparing Old Painted Surfaces of Fan including Cleaning, Washing, Rubbing and Filling Cavities with Filler, applying One Coat of Synthetic Enamel Paint (as approved) with Spray Painting Machine and Writing MES No. with Black Paint, complete all as specified and as directed.
M&L Hanging/Fixing only Ceiling Fan and Connecting with and including suitable Size Copper Conductor Cable from Ceiling Rose to Connector of the Fan, complete all as specified and as directed.
S&F Metallic Body Exhaust Fan 450mm Sweep with Louver, Heavy Duty, Single Phase, 230/240 Volt with Fixing Arrangement using Fastener, Providing Electric Connection from Ceiling Rose to Exhaust Fan with and including Copper Conductor Cable of suitable Size and Length, 3 Core, complete all as specified and as directed.
S&F MCB Single Pole 6 Amp to 32 Amp, 'B' Series, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB (06 No. only), complete all as specified and as directed.
S&F MCB Single Pole & Neutral 10 Amp to 32 Amp, 'B' Series, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.
S&F MCB Single Pole & Neutral 40 Amp, 'C' Series, 50 Hz, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB (01 No. only), complete all as specified and as directed.
S&F RCBOs 32 Amp, 30 mA, Double Pole for Earth Leakage, Overload & Short Circuit Protection and Connecting up including Taking down/out Unserviceable RCBOs (01 No. only), complete all as specified and as directed.
S&F MCB Distribution Board Sheet Metal Enclosure 4-Way, SPN, 240 Volt AC, Double Doors having Steel Sheet Phosphotised Powder Painted with 200 Amp rated Neutral Bars & Earth Bar and Connecting up, complete all as specified and as directed.
S&F MCB Distribution Board Sheet Metal Enclosure 8-Way, SPN, 240 Volt AC, Double Doors having Steel Sheet Phosphotised Powder Painted with 200 Amp rated Neutral Bars & Earth Bar and Connecting up, complete all as specified and as directed.
M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below Normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing including Taking down/ out Unserviceable Earthing of any description, complete all as specified and as directed.
Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and/or Laying of Cables, Pipes, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the Cable, Pipe Line with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.
Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade, Heavy duty Cable with PVC insulated Aluminium Stranded Conductor Served with an inner Sheathing of PVC Tape Armoured with Galvanised Steel Wire or Tape and overall PVC Sheathed, Nominal Cross Section 6.0 Sqmm, 2 Core in Service Connection, complete all as specified and as directed. NOTE : Necessary Earth Works and all other Cable Protection Materials will be Measured and Paid separately under relevent Items.
Supplying, Laying & Testing LT Under Ground Cable 1100 Volt grade, XLPE insulated, PVC sheathed, Heavy duty, Armoured with multi-stranded Aluminium Conductor all as per IS:7098 (Part-I)-1998 having Cross-sectional Area 10 Sqmm, 2 Core, laid in Trenches, Ducts or through Pipes, etc. including Taking out Old Unserviceable Cables, Protection Pipes/ Bricks or Pre-cast Concrete Cable Covers, etc., complete all as specified and as directed. NOTE : Earth Works, Protection Pipes/ Bricks or Pre-cast Concrete Cable Covers, etc. will be Measured and Paid separately under relevent Items.
M&L HDPE Double Wall Corrugated (DWC) High density Polythene Pipes of Outer dia 40mm and Inner dia 32mm, cut to length/Size as per Site requirement having Corrugation on the Outer Wall and Plain Surface on the Inner Wall, confirming to IS:14930 (Part I & II) for Protection of Under Ground Cable/ in PCC with and including all Fittings as required at Site including Cutting Floor and Making Good the same to match the Existing/ Adjoining Surfaces, etc., complete all as specified and as directed. MAKE : REX POLY EXTRUSIONS (ELDREX) or equivalent (ISI marked). NOTE : The Cost of All Accessories for fixing of DWC Pipe along the Wall/ Roof/ Cable Trays shall deemed to be included in Quoted UNIT RATE.
M/S Raju prasad
M/s United Builders
SHRI MANOJ KONWAR
M/S Abhi Traders
M/S Build Tech
M/S R & R D ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .