REINFORCEMENT OF TANGANABASA-VII, TANGANABASA-VIII, BUDHIKOMANA-II, JALAMKOTA-I AND TIKRAPADA-II L.I.PS. UNDER KOMNA BLOCK IN NUAPADA DISTRICT (STATE PLAN FUND)

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Filling foundation and plinth with excavated materials in layers not exceeding 0.30 m. including breaking clods within 50 m.initial lead levelling the trenches as the case may be etc.complete

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cement concrete (1:4:8) with 4cm size h.g.c.b. metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Brick work with Flyash. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

JALAMKOTA-I

TIKRAPADA-II

12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Still Bar (FE 415/ FE 500)

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Fitting of un plasticised 200 mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from factory site to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Fitting of un plasticised 160 mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from factory site to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

Supplying of 200 mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Supplying of 160 mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape.

TANGANABASA-VII

TANGANABASA-VIII

Cost of Outlet

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of 12.50 HP 9.375 KW BEE 3 Star rated energy efficiency MB Pump set with 20 mtr Head, 1700LPM Discharge, Bronze impeller

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of Control Panel with ASD starter 15 HP , 20 Amp, 415V 3 Ph, 50 Hz AC relay range 8.9 to 13.5 Amp including Volt Meter, Ameter, MCB etc.

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Testing of motor and starter in PTL

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of 63 Amp-400 V.T.P.main switch confirming to IS No.4064

BUDHIKOMANA-II

Cost 4 KVR Capacitor

BUDHIKOMANA-II

Cost 4 mm2 PVC Copper wire

BUDHIKOMANA-II

TIKRAPADA-II

Cost of 3 X 16 mm2 T.D.Cable

BUDHIKOMANA-II

JALAMKOTA-I

Cost of Electrical Earthing

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost Motor Hood

BUDHIKOMANA-II

TIKRAPADA-II

Cost of Base plate for motor

BUDHIKOMANA-II

TIKRAPADA-II

Transportation charges of materials including loading, unloading and stacking properly as per the direction of the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of 100mm dia G.I.Pipe with 4.5mm thickness (Medium class)

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of 100mm dia G.I.Bend

BUDHIKOMANA-II

Cost of 100mm dia C.I.Foot valve

BUDHIKOMANA-II

Cost of 100mm dia G.I. Flange

BUDHIKOMANA-II

Cost of 200 x 110 mm.dia MS / GI R/S with fittings

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of 200 mm.dia.PVC Tail piece

TANGANABASA-VIII

Cost of 200 mm.dia PVC Coupler (2.5 kg / cm2)

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Labour charges for installation of motor including fitting and fixing base frame,fitting fixing suction and delivery pipe to motor,NR Valve,foot valve,sluice valve and other fitting materials etc.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Misc.welding charges for Z joint,S bend etc. including cutting and threading

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Nut Bolt and Rubber insertion

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of Pannel Box

BUDHIKOMANA-II

TIKRAPADA-II

Cost of River Bank cutting & shaping for const. of P.F.

TANGANABASA-VII

TANGANABASA-VIII

TIKRAPADA-II

200 mm PVC End Cap

TANGANABASA-VII

TANGANABASA-VIII

JALAMKOTA-I

TIKRAPADA-II

160 mm PVC End Cap

TANGANABASA-VII

Cost of 160 mm x 160 mm x 110 mm G.I. Tee & other accessories for RCC Distribution Tank

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

200X200X160 mm.Spigot moulded reducing PVC Tee .

TANGANABASA-VII

TANGANABASA-VIII

JALAMKOTA-I

TIKRAPADA-II

Cost of 50 mm dia Air Release Valve with saddle & Raiser Pipe

TANGANABASA-VII

TANGANABASA-VIII

JALAMKOTA-I

TIKRAPADA-II

Supply of solvent cement of approve quality for joiniting of PVC Pipe with all cost and all tax etc. complete as per the direction of the Engineer-incharge.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Photography for Pre,On going & Post execution

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of Display Board made of MS Sheet (1.2x0.9mtr) including fitting, fixing,Stickering & lettering with radium boarder, bracing and welding.

TANGANABASA-VII

TANGANABASA-VIII

BUDHIKOMANA-II

JALAMKOTA-I

TIKRAPADA-II

Cost of DP Mounted 25 KVA S/S

BUDHIKOMANA-II

Cost of 120 mt.T Line with 1 no.of Cut Point

JALAMKOTA-I

Cost of 1 no.of Cut Point

JALAMKOTA-I