Creation of different capacity Sub-Stations along with HT LT network and Improvement Stabilization of LT lines under District Capex 2023-24.

Amount

Creation of Sub-Stations Supply,Installation,Testing & Commissioning of

11/0.433kV, 3-phase 100 kva Distribution Transformerswith Bimetallic Terminal Connectors Energy Level-2, with LV Cable Box having detachable Aluminium Gland plate.(Transformers to be provided by department)

11/0.433kV, 3-phase 63 kva Distribution Transformerswith Bimetallic Terminal Connectors Energy Level-2, with LV Cable Box having detachable Aluminium Gland plate.(Transformers to be provided by department)

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp,Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

95 mm² Single Core ,1.1kV Grade, PVC Insulated Stranded ConductorFRLS type

9 Mtr. Long Pole,ST-410 SP33)

33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative,creepage distance 900mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

LT Fuse Set

Wedge connectors/PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

Cement bottoming 1:2:4 mix as per REC standards .5cum/pole

Painting of Poles Red Oxide

Painting of Poles Aluminium Paint

SITC of Sundry items like almunium lugs,jumpers,binding tape etc

Construction of HT Line Supply,Installation,Testing & Commissioning of

9 Mtr. Long Pole( ST-410 SP33)

GI V cross-arm with top Bracket including clamp suitable for 33KV Pin & Disc insulators(sample available with department)

30 mm² ACSR Conductor

PG Clamps for 30Sqmm ACSR Conductor

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative,creepage distance 900mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards .5cum /pole

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2

Construction of LT Line Supply,Installation,Testing & Commissioning of

8Mtr. Long Pole( Poles) to be provided by department)

GI Channel X-arm including clamps and braces

30mm² ACSR Conductor

LT insulator with pin

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Danger plates

Cement bottoming 1:2:4 mix as per REC standards .45cum /pole

Dismentalibg/ Right back of Poles to divisional store

SITC of LT Line Spacers

M/S ALI MURTAZA