Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC | L1 | Accepted-AOC Accepted as L1 | |
| 2 | L2₹38.5 L+₹1.7 L (4.73%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹38.6 L+₹1.8 L (4.85%)Rejected-Finance FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹42.9 L+₹6.1 L (16.6%)Rejected-Finance CITY SURVEY NO 111 15 9 VIJAYA NAGAR KALEWADI PUNE 411 017 | PUNE | MAHARASHTRA | 411017 | L4 | Rejected-Finance Rejected |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu Road, Pune
GE Dehu Road, Pune
SPL REPAIR TO BATHROOM CUM TOILET BLOCK ALONGWITH SANITARY FITTING OF BLDG NO P 136 PROVN OF HARDSTANDING WITH DRAINAGE SYSTEM AT GUN PARK OF 105 AD REGT AND CERTAIN MINOR WORK UNDER AGE BR WEST AT GE DEHU ROAD
2022_MES_527579_1
8614
Open Tender
Civil Works
Item Rate
180 days
GE Dehu Road, Pune
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Dehu Road, Pune
₹94,000
Yes
6 Aug 2022
3 Jun 2022
21 Jul 2022
3 Jun 2022
19 Jul 2022
17 Jun 2022
60 days
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all specified & directed.
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 m depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.
Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
Returing, filling in including spreading lvelling watering and well ramming in layers not exc 25 cm thick in each layer as in soil complete all as specified and directed.
M & L for excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
Dismentling of wall & floor tiles, incl cement mortar bedding (but not backing) complet all as specified and directed byEngr-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc any type on any surfaces of wall and ceiling complete all as specified and directed by Engr-in-Charge.
Demolition of brick work / stone work built in CM all as spcified in any location and any type complete all as specified and directed by Engr-in-Charge.
Taking down steel tubing galvanised with connections of dia 15 mm.
-do- all as per item no 9 but 20mm.
Taking down chowkats or frame with shutter (w/o taking off shutter from the frame) of area not exc 1.5 Sq.m complete all as specified and directed by Engr-in-Charge.
-do- all as per item No. 12 above area exc 1.5 sqm but not exc 4.0 sqm
M & L Cement Concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed
M & L for Cement concrete in post holes filling type C-2 1:3:6 (40 mm graded aggregate) complete all as specifid and directed.
M&L for glazed coloured ceramic tiles 300mm X 450mm 6 to 7 mm thick as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 finished even and fair to receive tiles all as direced.
M&L for 20-25mm thk machine cut cuddappah stone slab over vertical surface screed bed or bedding in layer in cement mortar 1 :6, all as complete all as specified and as directed.
M & L non skid coloured ceremic tles 7 to 8 mm thick area of each tiles exceeding 0.11 sq.m , in floors, etc.set and jointed in cement slurry and pointed in white or coloured cement to match. Including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.
M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms wash Basin top and like in cement mortar (1:4) including rounding edges of sides, pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete.
M&L for rendring 10mm thick in CM 1:6 on fair faces of brick/ concrete ,wall surface is to be finished even and smooth (without using extra cement ) with thin layer of sagol complete all as specified and as directed.
M&L for 15mm thick cement plaster on concrete/ brick surfaces in CM 1:4 and finished top surfaces even and smooth with using extra cement with water proofing compound complete all as specified and as directed.
M&L two coats of cement based paint on new wall surfaces with preparation of new or undecorated surfaces wall with alkeli resistant priming paint etc complete all as specified and as directed.
M/L for two coat of OBD over a coat of chalk whiting on new surfaces of wall including ncessary preparation of new surfaces etc complete all as specified and as directed.
M&L fixing only Refixing of 15mm bore of pipe complete all as specified and as directed.(Note:- pipe obtained for item no-26)
Taking up or down steel tubing and connections including cleaning for refixing of 20mm bore of pipe complete all as specified and as directed.
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to for concealed water tubing and making good, cutting not exc 10 cm girth
S & F 15 mm dia GI pipes medium grade with all fitting & fixed to wall / floor
-ditto- all as per item No. 24 above but 20mm
S&F in repairs vitreous china squatting pan "Orissa pattern" size 580x 440mm white wash integral foot rest with provn of lime concrete bedding & jointing to flush pipe & socket of WC including 'P' or 'S' trap
S&F in repairs viterous china white wash basin counter top flat back or size 550 x 400mm pipe PVC connection 15mm dia x 450mm long with PVC down take pipe
S&F for virtreous china wash down water closet, pan white (pedestal pattern ) inlcuding plastic water closet black/white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device excluding fixing bolts flushing cistern and flush pipe complete all as specified .
S&F in repairs vitreous China urinals half stall urinal (back or corner wall type), complete inlcuding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including urinal spreader of PTMT any colour for fixing with 15mm dia pipe, PVC connection 15mm x 600mm long, waste coupling of PTMT (Half or full threaded) 40mm dia
S&F in repairs 15mm dia pillar taps cast copper alloy with capston head chromium plated screwed down high pressure wlth or without letter "Hot" or "cold" with long screwed shanks and flynuts
S & F in repairs 15 mm dia bib taps chromium plated fancy type , screwed down for iron pipes or for brass ferrule.
S & F in repairs 15 mm dia stop valves fancy type , chromium plated with long shank and cup (concealed type) ,screwed high pressure with crutch or butterfly handles screwed both ends for iron pipe. Etc.
S& F in repairs PVC flushing cistern white colour 10 ltr capacity with inlet, ball valve, lever & bracktes etc.
S & F in repairs stainless steel anodised tubular towel rail, 20 mm D type 60 cm long between flanges.
S & F in repairs 75 mm dia outlet long arm cast iron nahani trap with grating incl jointing to waste pipe fixed in cement concrete etc.
Dismantling of CI 110/75 mm pipes fixed to walls and floor with all fittings/ accessories complete all as specified and directed.
S & F PVC (SWR) pipes single sockated in any length with rubber ring joints fixed on walls dia 110 mm.
-ditto- all as per item No.40 above but 75 mm dia
S&F PVC (SWR) bend 110mm dia with acess door
S&F PVC (SWR) bends 75mm dia with access door
S&F PVC (SWR) vent cowl 110mm dia
S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube.
S/F factory made solid PVC moulded door shutter thick (style) consisting of frame made out of MS ltubes for top and bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' chanel having a PVC sheet strips PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail. Panelling and plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, suppling and fixing in the frame at site as per specification and drawing
M&L for pressed steel frames for doors with one or more rebates incl necessary fixing lugs hinges lock strike plates exc size or grame 105 x 60mm
M&L for cement concrete 1:3:6 type C1 (using 20mm graded stone agg) as in door frame filling
S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood.
S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00mm fixing to steel window with nut bolt.
M&L for painting to wooden surfaces with two coats of synthetic enamel paints wlith pink primer and preparation of surfaces etc complete
S&F aluminium powder coated window silding type (3 track) with frame size 100X35X1.2mm aand shutter 39.40X17.70X1.20mm with two glass shutter & one mesh shutter incl necessary jointing cleats glazing clips, rubber packing and locking arrangement power coated aluminium snap beading screws including 5mm plain float glass & 0-36 mm dia and 1.4mm width of aperture SS wire mesh, fittings ect complete all as specified and as directed.
S&F Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) hand fixing clips of sheet cast or extruted section & fixing bolts & sliding blots of extruted sections of cast aluminium alloy & fixed 300mm long
S&F anodised aluminium frame powder coated for doors, window, ventilators powder coated with one or more rebates including joining cleat for fixing etc, complete all as specified
S&F anodised powder coated aluminium window and ventilator shutter, fixed type without sash bar, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, ruber neorene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified
S & F 5.5mm thick sheet glass ordinery quality nexc 0.50 sqm in each pane
S/F 200mm length Aluminium anodised barrel tower bolt
S/F Aluminium handles fabricated type anodised 150mm
M&L bands, straps, supports or stays, for rain water ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large haps and staples; chains; hand made sliding bolts; clamps ; hold fasts; wall ties; hooks for hanging fans' plain angle cleats for securing purlins to wood trusses or raftrs; knee piece inserts; two way and three way straps, plate washers and similar small article confiring to Fe-290 Gde E-165
Dismanling water tanks exc 250 & n exc 500mm
Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.
M&L rotational moulded polythelene water store tank, cylindrical vertical with closed top hoisted and fixed in position all as specified capacity of tank 500 ltrs
M&L rotational moulded polythelene water store tank, cylindrical vertical with closed top hoisted and fixed in position all as specified capacity of tank 1000 ltrs
S&F PVC ball valves, high pressure with apaxy coated aluminium rod and high dencity plaster ball screwed for iron pipe 20mm
Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L 75 mm thick cement concrete (1:3:6 )type C2 (using 40mm graded stone agg) as in plinth protection finished top surface even and smooth with using extra cement all as specified and directed.
Demolition & breaking up drain pipe (salt glazed, AC or reinforced concrete ) set in cement mortar for 200 mm dia pipe.
M&L for PCC ( 1:4:8) type D2 (using 40 mm graded stone aggregate ) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 200 mm bore RCC Pipe.
M&L cement concrete (1:2:4) type B-2 in surface channels and drains in using (40 mm graded stone aggregate) complete all as specified and directed.
S&F of 200mm dia RCC pipe class NP-3 laid and jointed in trench after testing the joint with collars complete all as specified and directed.
M&L for reinforced cement concrete pipes class NP - 3, laid in trenches & jointed complete with collars, dia of pipe 200mm.
M&L concrete bed for 200 mm dia drain pipe in concrete 1:4:8 type D-2 including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M & L for providing reinforced cement concrete Type B1 in 1:2:4 , using 20 mm graded stone aggregate, as in slabs complete all as specified and directed.
M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.
M & L for use and waste of form work to sides and soffits of floor or roof beam ,beams slabs, floor slabs, landings and similar work horizontal or slopping in rough finished surface of concrete complete all as specified and directed.
M&L for birck work with sub class 'B' bicks straigt or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.
M&L Pre-cast cement concrete block type C-1 1:3:6 (using 20mm graded stone aggregate) masonary with solid blocks exc 10cm in width and setting in cement mortar 1:6, complete
M&L for pre cast cement concrete cover slabs of PCC 1:2:4 Type B-1 set & jointed in CM 1:6 (Reinforcement shall be measured & paid separately)
M&L for TMT bars 6 to 8 mm dia cut to length, bent to shape required incl cranking,bending, hooking ends & binding with & incl mild steel wire (annealed ) not less than 0.9 mm dia.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Ditto as per item No 15 above but 5mm dia and over upto and including 10mm dia in stirrups spacers and binder
Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed.
M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction by weight of cement for filling depressions if any to receive water proofing treatment (WPC shall be measured & paid seperately) complete all as specified and as directed.
M&L Rendering 15 mm thick in cement mortar (1:6) on concrete surfaces/brick wall surface, finished even and smooth without using extra cement complete all as specified.
M&L for 5mm thick rendring on ceiling on concrete surfaces brick work with cement mortar 1:3 complete all as specified
M&L for rendering 15mm thick in two layers (10+5mm) cement plaster on concrete/ brick surfaces in CM 1:4 and finished top surfaces even and smooth with using extra cement with water proofing compound
Supply only Liquid water proofing compound .
M/L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :- (a) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane. (e) The make / treatment shall be from the one of the following manufacturer :- (i) 'Moply FP' of M/s Texsa (I) Pvt Ltd. (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydroflame' of M/s Hydrotech Ltd.
Demolition of cement concrete (unreinforced) in Suken portion exe15 cm thickness (below or aboveground level) complete all as specified and directed.
M & L cement conrete 1:7:12 type C2 (uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed.
M&L 75mm tick PCC 1:4:8 type D2 (40mm graded aggregate) in sub base of floor/pavement, all as specified and directed.
Providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturer's specification paint complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness( below or above ground level) complete all as specified and directed.
M & L for 100mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) in sub base complete all as specified and as directed.
M&L for chequered cement concrete tiles coloured with mixture of white cement and pigments of size 20cmx20cmx25mm thick set, jhointed and pointed in neat cement slurry in fooors incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer in charge.
M & L PCC 1:2:4 type B1 (20 mm graded aggregate) as in bed blocks,copings , kerb stone etc.
M & L for Moorum/red bajri filling in floors or paving laid in layers n.exc. 15 cm thick spread levelled and rammed including watering complete all as specified and directed.
M & L 150 mm thk Hard core of broken stone or boulders, gauge n.exc. 63 mm deposited, spread and levelled in layers , watered and rammed to a true surface complete all as specified and directed.
Rolling and consolidating formation surfaces with power roller exc. 8 tonne but n. exc. 12 tonne including watering, consolidating to the required level, gradient, camber etc. in cutting, filling in hollows and depressions in the process complete all as specified and as directed.
M & L for 100 mm thick PCC (1:4:8 type D2) (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed.
M&L 100mm thick cement concrete in 1:2:4 using type B2 20mm graded stone aggregate as in floor finishing complete all as specified and directed.
M & L for 150 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) for hard standing complete all as specified and directed.
Finishing surface of concrete roads, pavements etc by brooming complete all as specified and directed.
M & L for forming 12 mm thick construction joints filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.
M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
S & F of mild steel work in hand rail, half round or other stock section or core for fixing of wooden hand rails, bluster, running bars, nosing of steps, wind ties, post and struts for fencing, flat iron fillets and the like including necessary cutting, drilling holes, notching etc. as required conforming to Fe-290 Grade E-165 complete all as specified and directed.
Rolled mild steel plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with out any attachment Fe 410 W Gde E 250 quality A.
Pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in roof covering /cladding to walls fixed with self tapping screws as specified.
M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide.
M & L for providing reinforced cement concrete type B0 1:2:4( 12.50mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.
M & L for providing reinforced cement concrete type B0 1:2:4( 12.50mm graded aggregate stone aggregate,as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.
M&L for glazed coloured ceramic tiles 450 mm x350x 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement to match the tiles incl backing coat 10mm thick in CM 1:4 all as specified direced.
S & F of steel window or ventilator fixed type with glazing bars complete all as specified and directed.
S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.
S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle including bracket
S & F pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.
S&F stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.
S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm
S & F of 32 mm bore brass chromium plated bottle trap for wash basin with inlet and outlet, screwed for pipe or connection including necessary packing, union and cap complete all as specified and directed.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white minimum),with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including urinal spreader adn waste cupling PTMT
S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.
S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.
M&L for cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 100mm dia
S & F of 110 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal complete all as specified and directed
E/M Part
S & F in repair submain wiring with cable insulated single core multistranded copper conductor FRLS cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 2.5 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 4 sqmm cable, one run of 2.5 sqmm earth cable and one run of PVC casing capping/conduit will be measured as one RM).
M&L for point wiring complete including single core PVC insulated and unsheathed type flexible bright unsheathed multi stranded 1.5sqmm copper conductor FRLS PVC casing caping and surfaces/concealed PVC conduit & accessories having ISI mark to be fixed with proper screws / (MS steel strips if required) including all accessories / fittings/ junction boxes/ inspection covers etc including hard PVC board of required size fixed with wall surface by means of brass screws and sunk/ cupwashers, for mounting of switches fan regulators etc including 1.5 sqmm (22/0.30mm) 1100V grade PVC insulated, unsheathed flexible multi stranded copper conductors FRLS cable as continuos earth wire connected to metallic bodies of luminaries/ fans etc. at one end and to common earth duly at other end for :-
One light point controlled by one way switch
One fan/exhaust fan point controlled by one switch
One switch socket 5 pin 5 Amps flush type on same board
One switch socket 5 pin 5 Amps flush type on Independent board
M&L for point wiring with 2.5 sqmm single core multistranded copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for 15 Amps Power point Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing
S&F switch piano flush type single pole one way 5 Amps
S&F Socket outlet 2 in 1, 3 pin 5 Amps flush type 230V S.P. multipurpose type
S&F Socket outlet 2 in 1, 3 pin 15 Amps flush type 230V S.P. multipurpose type
S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block
S&Fregulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep
M&L for MCB DB SPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 240 V with 200 Amps rated bus bar 4 way
S&F MCB SP 6-32 Amps, 240 Volts 10 KA
S&F isolator SPN 40 Amps 240 Volts 10 KA
Supply and fix in repair LED Fitting with 18 Watts LED including provision of connections cable PVC unsheathed stranded copper conductor and PVC square block of size 80mmX80mm MODEL:LHEXBTP7IN1W018 MAKE :Havells or Equivalent in Philips/Bajaj/HPL
S&F in repair LED Security Light fitting of 25 W, Die cast Aluminium extruded housing with reflector and enclosed with toughened glass IP 65 for Driver and incl providing electric connection cable PVC insulated multistarnaded copper conductor of size 1.5 sqmm(3 nos) from st light to junction box/ conductor and unsl light deposited in E&M store and all as specified & Directed. Make : Cat Part No of Havells ENDURAPEARLSL25WLED757SASYTOPC or equivalent of Philips,Bajaj, Jaguar and HPL.
S&F in repair LED Security Light fitting of 35 W, Die cast Aluminium extruded housing with reflector and enclosed with toughened glass IP 65 for Driver and incl providing electric connection cable PVC insulated multistarnaded copper conductor of size 1.5 sqmm(3 nos) from st light to junction box/ conductor and unsl light deposited in E&M store and all as specified & Directed. Make : Cat Part No of Havells ENDURAPEARLSL35WLED757SASYTOPC or equivalent of Philips,Bajaj, Jaguar and HPL.
M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified.
Material and labour for replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 40mmX6mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size all as directed incl taking down of old unserviceable bracket.
Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade of size 10 Sqmm x 2 core PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall enclosed in GI pipe etc complete all as specified and directed.
M & L for DWC HDPE Pipe 40 mm outter dia for UG cable protection passing of cables on wall or floors with shaddling and under ground and all as specified and directed by Engineer-in-Charge. Make:-Infra/Supreme/Prince
M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Engr -in- charge.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-
Soft / loose soil
Hard / dense soil
Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.
M&L for GI tubing 50 mm dia light grade with all necessary fittings laid in trenches or fixed on wall/poles and etc all as specified and directed for protection of LT cable.
M&L for GI tubing 40 mm dia light grade with all necessary fittings laid in trenches or fixed on wall/poles and etc all as specified and directed for protection of LT cable.
M&L for GI tubing 25 mm dia light grade with all necessary fittings laid in trenches or fixed on wall/poles and etc all as specified and directed for protection of LT cable.
M&L for GI tubing 20 mm dia light grade with all necessary fittings laid in trenches or fixed on wall/poles and etc all as specified and directed for protection of LT cable.
AVS CONSTRUCTION
H S TAKHI
M/S RENUKA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .