Loading…
Loading…
Tender Value
₹5.4 L
EMD Value
₹8,050
Closing Date
27 Oct 2021, 3:00 pmClosed
ASSISTANT EXECUTIVE ENGINEER
ASSISTANT EXECUTIVE ENGINEER LID AND EW SUBDIVISION MALAMPUZHA BLOCK PANCHAYATH
MALAMPUZHA BLOCK PANCHAYATH 2021-22 - B.P.L SANYO CANAL ROAD IN KODUMBU GP
2021_LSGD_445154_1
28/AEE/LSGD/MBP/2021-22
Open Tender
Civil Works - Roads
Item Rate
120 days
LID AND EW SUBDIVISION MALAMPUZHA BLOCK PANCHAYATH
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,100
Yes
₹8,050
Yes
10 Dec 2021
13 Oct 2021
29 Oct 2021
13 Oct 2021
27 Oct 2021
13 Oct 2021
Amount
RE-TARRING
od1393265/2021_2022 : Filling up pot holes ( cut and formed to regular shapes and all loose and defective materials removed ) after supplying a prime coat of hot bitumen using 36mm broken stone and compacting with power roller to get a compact surface.
75.5.2.2pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.9.3.pb.pa : Plastic roads- Packed Bitumen Rate <br> 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder -<br> Bitumen S-65 - Packed Bitumen and Shredded Plastic<br> <br> Providing, laying and rolling of opengraded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, using HM Plant attached with open pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, then transferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2 mixing well to form a uniform thin layer of plastic over - hot aggregate and adding hot bitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rolling with a. three wheel 80-100 kN static roller capacity, finished to required level and grades to be- followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 <br> Case - I By Manual Means <br> <br> (II) Bitumen (S-65)
75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65)
Name board
od1393285/2021_2022 : Supplying and providing readymade GI name board with all conveyance,labour and hire charges etc complete using GI hollow tube of size 80x40x1.4 mm post,40x20x1.4mm outer erame,0.6mm thick iron sheet of size 90x60cm with two coat of enamal painting over a coat of primer,lettering with suitable colour and size,fixing the post in ground with CC 1:2:4 etc complete.
V RAJESH
Bidder Name
DEVADAS K
V RAJESH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_634365.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .