Restoration rain damages of LWSS Nog Chandpur in Tehsil Sadar District Bilaspur (SH Repair of gravity main 65mm dia and rising main 80mm dia at various locations at various RDs).

Excavation in foundation and trenches etc. ( for pipe and pits) up to all depths and in all kinds of soils such as pick work, pick jumper work, saturated soil including bailing or pumping out of water, blasting in soft/ hard rock, chiseling/wedging out of rock where blasting is prohibited, in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable materials/ soils separately and after laying, jointing and testing of pipes, returning the usable soils in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil / unusable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lifts as per the direction of the Engineer-in-charge

Pick work

Dismentalled of GMS pipe from trenches (earth work in trenches to be measured and paid for separately) and to the enitre satisfaction of the Engineer-in-charge.

65mm dia from Node B-C,D-E,F-G

80mmdia from Node J-K,L-M

Re-laying, Jointing and testing galvanized mild steel tube in trenches of following dia. including tube fittings such as bends, tees, reducers, unions etc. complete and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately).

65mm dia from Node B-C,D-E,F-G

80mmdia from Node J-K,L-M

Providing circumferential butt welded joints at various RD's/ locations by electrical arc welding to the varIous dia GI / MSERW pipe as per conforming to IS: 3183-2007 (latest upto date amendements of grade and wall thickness as specified below welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications by using welding electrodes of 2.5mm to 6.3mm of Advani Orelon (Adore)-CITOJET/ESAB make, conforming to IS: 814-1991 at site of work complete in all respect, including manual/ mechanical handling of pipe in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.

65mm dia from Node B-C,D-E,F-G

80mmdia from Node J-K,L-M