MAIENTANCE OF INTERNAL ELECTRIFICATION, LIGHT FITTINGS/ FIXTURES/ ACCESSORIES AT OMQs, SMQs AND OTM BILLETS AT OUTER AND INNER POCKETS OF DOMESTIC AREA OF 32 WING UNDER AGE E/M, GE (AF) NO 2 JODHPUR

Amount

Taking down carefully copper/aluminium point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc,.

M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green colour) connected to common earth dolly, drawn in and including PVC Casing and Caping, GI terminal boxes 1.2mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover for mounting switch and sockets etc. complete all as specified and directed for following : -

(a) One light point/exhaust fan point controlled by one switch or one ceiling fan point controlled by one switch & electronic type fan regulator.

(b) One light point controlled by two No’s 5 Amps switch two way

(c) One 3 pin 5 Amp switch & socket outlet on same board with other switches.

(d) One 3 pin 5 Amp switch & socket outlet on Independent board.

(e) One bell point controlled by one switch 5 Amps bell push.

All same as per item ser No 2 here-in-above but wiring using 2.5 sq mm multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green colour) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independent board.

S&F(in repairs) Switch piano, flush type, single pole, one way, 6 Amp.

S&F(in repairs) Socket outlet 2/3 pin, 2-in-1, 5/6 Amp, flush type.

S&F(in repairs) Switch Socket combination outlet 6 pin, 6/16 Amp, flush type

S&F(in repairs) Ceiling rose surface Bakelite 65x50mm three terminal.

S&F(in repairs) Lamp holder insulated PVC/Polycarbonate/ Bakelite body, fixed on PVC round or square box using necessary screw & gutty complete all as specified.

S&F(in repairs) Stepped type electronic fan regulator, socket size, flush type 230V AC.

S&F(in repairs) Stepped type electronic fan regulator, switch size, flush type 230V AC.

S&F(in repairs) electronic Bell Bulbul music, 230 volt, single phase.

S&F(in repairs) switch modular single pole one way 6 Amps 230 volt 1 module.

S&F(in repairs) switch modular single pole two way 6 Amps 230 volt 1 module.

S&F(in repairs) bell push, Modular type, 6 Amps, 2 Module

S&F(in repairs) switch modular single pole one way 16 Amps 230 volt 1 module.

S&F(in repairs) Socket modular 6 Amp 2/3 pin combined two module.

S&F(in repairs) Socket modular 6&16 Amp 2/3 pin combined two module.

S&F(in repairs) electronic fan regulator modular stepped type 120 watt, two module.

S&F(in repairs) modular white or Ivory cover plate with frame 1 module

S&F(in repairs) modular white or Ivory cover plate with frame 2 module

S&F(in repairs) modular white or Ivory cover plate with frame 3 module

S&F(in repairs) modular white or Ivory cover plate with frame 4 module

S&F(in repairs) modular white or Ivory cover plate with frame 6 module

S&F(in repairs) modular white or Ivory cover plate with frame 8 module

S&F(in repairs) modular white or Ivory cover plate with frame 12 module

Supply and fix in repairs fan capacitor 2.5 Mfd suitable for 1200mm sweep ceiling fan,

Supply and fix in repairs 3 Pin Plug Top 16 Amps, 240 volt insulated bakelite body(Ivory/White)

Fixing only LED light fitting any type, connecting up with twin core PVC insulated and PVC sheathed flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Note : Serviceable light fittings received from item NO 1 above will be issued by department fixing only at AGE E/M Store yard.

Taking down and refixed Electric energy kWH meter Single phase/three phase 10 to 60 Amps, including making connection of incoming and outgoing wiring circuits using single core PVC insulated copper multistranded cable of size 6.0 sq mm and necessary lugs, including submission of kWH reading details of old unserviceable taken down meter and new installed meter to AGE E/M all as specified and directed.

Taking down carefully Ceiling fan/Exhaust fan by disconnecting electrical connections, unscrewing from position, dismantling blades and removing fan and blade to E/M Store yard for reused of serviceable fans ,all as directed and specified.

Hanging only ceiling fans, 1200mm sweep, complete with three blade, down rod, accessories and making connection from ceiling rose or connector to fan using three core 0.75sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire complete all as specified. NOTE: Serviceable fan received from item NO 30 for fixing only at AGE E/M store yard.

Fixing only exhaust fan 300/450mm sweep, Steel/PVC body AC single phase 230V of size 300m using 4 No’s 10mm x 100mm long wall fasteners, nut and washers and connecting up using flexible three core 0.5sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire through PVC flexible conduit from ceiling rose/connector to fan complete all as specified. NOTE: Serviceable fan received from item NO 30 will be issued for fixing only at AGE E/M store yard

Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB SPN 32Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB TPN/FP, 40 to 100 Amps 415 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.NOTE FOR 33 TO 36-MCBs shall be C- Curve andcurrebt rating shall be6/10 A for lights ,16/20 20Amps for powerand 25/2Ampfor submain circuits all as directed by Engr- in charge

Supply and replace Sheet metal enclosure SPN DBs, 2 way without bus bar complete including taking out old all as specified and directed.

Supply and fix in repairs metal clad, 2 Pin+Earth Plug Top 16 Amps, 240 volt.

Taking down carefully unserviceable storage type water heaters (Geysers) 25/50 Ltr Capacity and shifting the same to for repairs works or shifting to MES E/M store yard for safe custody all as directed.

Installation only Electric Storage type water heater (Geysers) 25/50 Ltr capacity with standard fixing accessories including suitable size wall fastener bolts & Nuts, gutties etc complete all as specified and directed. NOTE: Serviceable geysers received under item bo 39 will be issued by department for fixing at AGE E/M store yard.

M&L for replacement of HOT & COLD PVC water connection pipes stainless steel braided flexible pipe 450mm long complete all as directed

M&L for replacement of HOT & COLD PVC water connection pipes stainless steel braided flexible pipe 750mm long complete all as directed

M&L for replacement of thread type B-17 base LED lamps Warm light 3 to 6 watt of decorative light fittings at VIP guest rooms of Officers Mess complete all as directed

M&L for replacement of unserviceable LED driver suitable for 2 feet x 2 feet recessed/surface mounting type LED light fittings as per make of existing light fittings complete all as directed.

Taking out existing unserviceable switch board plates any type, dismantling switches casually, stacking at site for use of serviceable switches and supply and fixing new 3mm thick Masonite laminated sheet top cover fixed on 6/8 inch x 10 inch MS box and brass screw for mounting switches, sockets, regulator etc including making necessary electrical connection with 1.5 sq mm single core copper multistranded cable all as directed at site by Engineer-in-charge. (Note : New Switches, sockets, fan regulators etc if required will be measured and paid separately under relevant items.)

ditto but All as per item ser No 45 here-in-before but new 3mm thick Masonite laminated sheet top cover white or ivory fixed on 6/8 inch x 4 inch MS box. complete all as directed

All as per item ser No 45 here-in-before but new 3mm thick Masonite laminated sheet top cover white or ivory fixed on 4 inch x 4 inch MS box. complete all as directed

Note for Item No 9.0 to 47.0 :- (a) The contractor will deploy sufficient resources for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit suitable penalties as mentioned in relevant clause of Contract. Or otherwise Rs 150 per non complain attending will be recovered from their due amount .Weakly report of complain received and attend by the contractor will be deposit by the contractor in GE’S OFFICE for record in M B WITH DATE AND BUILDING NO for payment purpose. (b) A detailed log of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and same will be updated on daily basis in consultation with Engr-in-Charge or JE detailed by him. (c) The contractor will make suitable arrangement for emergent complaints and will notify JE/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond state time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard. (d) The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints. (e) The quoted rated deems to be inclusive of transportation, T&P and other expenses required for the resource deployment at the complaint site around scattered at AF Station Jodhpur. (f) The contractor will maintain suitable inventories and range of spares required to meet the complaints as same will be reviewed periodically by Engr-in-charge or JE detailed by him to streamline complaints disposal system. Record of Complain received and attend be submitted duly signed by eng-in charge and users, for allowing payment in each RAR\BILL and same shall be atteched with each RAR and FINAL BILL also .

Supply and replace sheet metal enclosure distribution board for 240 volts, 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and replace sheet metal enclosure distribution board for 240 volts, 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and replace sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 20 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete including taking out old all as directed.

Supply and replace Sheet metal enclosure distribution board TPN, 415 volts, 4 way Horizontal/vertical type as per site requirement, double door type, 200 Amps rated neutral copper bus bar for housing MCBs and including provision for fixing TPN MCB as incomer, DB fixed flush or in wall surface including making good to damaged surface of wall to match with existing specification complete including taking out old all as specified all as specified and directed. Note : MCB SP/SPN/TPN will measured and paid separately under relevant item.

Supply and replace distribution board TPN DB with protection IP-43 and provision for fixing 100A MCCB, 16kA 3/4 pole as incomer and SP/TP MCB as outgoing 6 way fixed flush or in wall surface and making good damaged surface of wall to match with its existing specification including taking out old MCB DB. Note : MCCB will measured and paid separately under relevant item.

Taking down carefully light fitting any type from surface/recessed/wall mounting type stacking at site for re-use or shifting unserviceable lights to store for taking credit all as directed and specified.

Supply and fixing (in repairs) compact commercial LED Tube light batten suitable for T8 LED tube rod, batten fixed using 2 Nos round or square box PVC heavy duty, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed and specified. (NOTE - Cat part and model no shall be approved by GE for make mentioned in APPENDIX of tender .)

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed and specified.(NOTE - Cat part and model no shall be approved by GE for make mentioned in APPENDIX of tender .)

S&F LED light fitting 1 x 10W bulkhead luminaires including LED light driver perfect interior and exterior application connecting up with three core flexible copper conductor cable of suitable size complete all as directed and specified(NOTE - Cat part and model no shall be approved by GE for make mentioned in APPENDIX of tender .)

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light (Day cool/warm light) complete with drivers, holders, LED lamp suitable for roof ceiling (cut-out size 80mm and surface dia 115mm approx.) including connecting up with three core flexible copper conductor cable of suitable size complete all as directed and specified.(NOTE - Cat part and model no shall be approved by GE for make mentioned in APPENDIX of tender .)

Supply and fixing round/square shape 10 watt 220 volts AC Surface mounting type with high efficiency PMMA diffuser soft glare free light(day cool/warm light) complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as directed and specified(NOTE - Cat part and model no shall be approved by GE for make mentioned in APPENDIX of tender .)

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 25 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated location all as specified and as directed by Engr - in Charge (NOTE - Cat part and model no shall be approved by GE for make mentioned in APPENDIX of tender .)

M&L for taking out old unserviceable lovers shutters of exhaust fans from external face of walls from double/triple storey buildings and providing aluminium wire mesh (3 to 4 mm mesh) with Aluminium frame (Gauge thickness not less than 1.2mm) including necessary fixing accessories (like clamps, screws, washers, gutties etc) to prevent entry of birds/insects through opening of exhaust fans on walls. Approximate size of frame to be provided at site is 400mm x 400mm for 300mm dia openings holes and 600mm x 600mm for 450mm dia openings holes. Note : Necessary T&P such as ladders, safety belts, drilling equipment’s for fixing Wire mesh at heights of double/triple storey building shall be arranged by the contractor and cost for the same deems to be included in quoted rates.

S&F ceiling fan of 1200 mm sweep,copper winding , induction motor type, BEE approved, single phase, AC supply, 240 Volt, including canopies, three number blades, down rod, double ball bearing with capacitor of 2.5 M fd and making connection with and including PVC insulated PVC sheathed copper conductor flexible cable from ceiling rose or connector to fan including marking of MES number complete all as specified. NOTE: I)The length of suspension rod shall be as per site requirement.II)New fan shall be fixed at the location/BLDG from where retrieved fanreceived under item no 30(NOTE - Cat part and model no shall be approved by GE for make mentioned in APPENDIX of tender .)

S&F Exhaust fan 300 mm sweep,copper winding , metal body, mounted in suitable opening arrangement with louvers shutters suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up including provision of flexible PVC conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified.

S&F Exhaust fan 450 mm sweep, copper wounded ,four blade ,metal body, mounted in suitable opening arrangement with louvers shutters suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up including provision of flexible PVC conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified.

Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm all as directed and specified

Supply and fix exhaust fan in repair made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm all as directed and specified

Supply & connect PVC flat twin core cable, black sheathed, stranded aluminium conductor 4.0 Sq mm complete all as specified and directed.

Supply & connect PVC flat twin core cable, black sheathed, stranded aluminium conductor 6.0 Sq mm complete all as specified and directed.

Supply & connect PVC flat twin core cable, black sheathed, stranded aluminium conductor 10.0 Sq mm complete all as specified and directed.

M&L for Sub main wiring with approved colour coding as per IS, single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, junction boxes etc) including taking down old unserviceable sub main wiring complete all as specified for following sizes of wires :-. (Note : GI saddle shall be used to fix PVC conduit and distance between two saddle shall not be exceed 1.2 mtr)

(a) Two runs of 2.5 Sq.mm main cable along with one run of single core 2.5 Sq.mm for continuous earth wire

(b) Two runs of 4.0 Sq.mm main cable along with one run of single core 4.0 Sq.mm for continuous earth wire

(c) Two runs of 6.0 Sq.mm main cable along with one run of single core 6.0 Sq.mm for continuous earth wire

(d) Two runs of 10.0 Sq.mm main cable along with one run of single core 10.0 Sq.mm for continuous earth wire

M/s. Dhananjay Construction

M/S RAKESH CHOUDHARY

Siddharth Constructions