Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-AOC | L1 | Accepted-AOC Bidder is L1. | |
| 2 | L2₹29.2 L+₹1.9 L (6.79%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest. | |
| 3 | L3₹36.0 L+₹8.6 L (31.7%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest. |
| Sl No | Description | Qty | Unit | OM SAI POWER SYSTEMS L1 | Srinivasa Consructions L2 | M/S SRIDEVI ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Supply, install, commissioning & testing of Outdoor Type AMF Panel suitable for DG Set of upto 200 KVA of size 1500 mm (height) x 1200 mm (breadth) x 600 mm (depth) (minimum dimensions) factory fabricated CPRI (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming/Outgoing ACB/MCCB rating (as applicable). The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories | 1 | Each | 2,49,001 ₹2,49,001 | 3,90,000 ₹3,90,000 | 1,70,000 ₹1,70,000 Lowest |
| 1.01SEB I/C : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 268 to 400 A - 01No. Cat No : DZ6F0400DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. DG I/C : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 268 to 400 A - 01No. Cat No : DZ6F0400DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. AMF MAIN O/G : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 268 to 400 A - 01No. Cat No : DZ6F0400DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. COMPACT ENCLOSED ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 400 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand. (ii) Ample Space for Cable Termination. (iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test). (iv) Cyclic Event Logger. (v) Priority Source Selection. (vi) Adjustable Time Delay (0.1 Sec to 3 Hrs). (vii) Suitable for 3-Phase as well as 1-Phase sources. (viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency. (ix) Terminal Shrouds, Phase Barriers & Source Separator etc. Make : Cat No CK90166BSOO of make L&T or techno-commercially equivalent of ABB/Siemens. The size/rating of all the connected accessories viz. MFM, RYB Indication Lamps, MCBs, 400/5 CT Coils, DG Start/Stop Relay, 12V/10A Battery Charger, OV/UV Relays, 230V Aux Contactor, DG Set Running Indication Lamp, Load ON Mains/DG Indication Lamps etc. of the AMF Panel shall be as per OEM & in conformity with the I/C & O/G MCCBs duly provided with BYPASS system/arrangement complete. | ||||||
| 2.00 | Supply, install, commissioning & testing of Outdoor Type AMF Panel suitable for DG Set of upto 320 KVA of size 1500 mm (height) x 1200 mm (breadth) x 600 mm (depth) (minimum dimensions) factory fabricated CPRI (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming/Outgoing ACB/MCCB rating (as applicable). The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories : | 1 | Each | 3,40,000 ₹3,40,000 | 5,20,000 ₹5,20,000 | 3,15,000 ₹3,15,000 Lowest |
| 2.01SEB I/C : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 422 to 630 A - 01No. Cat No : DZ7F0630DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. DG I/C : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 422 to 630 A - 01No. Cat No : DZ7F0630DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. AMF MAIN O/G : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 422 to 630 A - 01No. Cat No : DZ7F0630DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. COMPACT ENCLOSED ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 630 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand. (ii) Ample Space for Cable Termination. (iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test). (iv) Cyclic Event Logger. (v) Priority Source Selection. (vi) Adjustable Time Delay (0.1 Sec to 3 Hrs). (vii) Suitable for 3-Phase as well as 1-Phase sources. (viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency. (ix) Terminal Shrouds, Phase Barriers & Source Separator etc. Make : Cat No CK90167BSOO of make L&T or techno-commercially equivalent of ABB/Siemens. The size/rating of all the connected accessories viz. MFM, RYB Indication Lamps, MCBs, 700/5 CT Coils, DG Start/Stop Relay, 12V/10A Battery Charger, OV/UV Relays, 230V Aux Contactor, DG Set Running Indication Lamp, Load ON Mains/DG Indication Lamps etc. of the AMF Panel shall be as per OEM & in conformity with the I/C & O/G MCCBs duly provided with BYPASS system/arrangement complete. | ||||||
| 3.00 | Supply, install, commissioning & testing of Outdoor Type AMF Panel suitable for DG Set of upto 15 KVA of size 1000 mm (height) x 900 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming/Outgoing ACB/MCCB rating (as applicable). The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories : | 2 | Each | 1,25,000 ₹2,50,000 | 1,30,000 ₹2,60,000 | 65,000 ₹1,30,000 Lowest |
| 3.01SEB I/C : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 26 to 32 A - 01No. Cat No : DZ0F0032CXC1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. DG I/C : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 26 to 32 A - 01No. Cat No : DZ0F0032CXC1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. AMF MAIN O/G : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 26 to 32 A - 01No. Cat No : DZ0F0032CXC1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. COMPACT ENCLOSED ATS (Automatic Transfer Switch) suitable for inside panel mounting & I-O-II operation, 4 Pole, 40 A, confirming to IEC 60947-6-1 - 01 No complete with following features/specifications : (i) Double-Break Contact System offering High Short-time Withstand. (ii) Ample Space for Cable Termination. (iii) Ease of Generator Control (ON-OFF, Cooling Cycle Self-Test). (iv) Cyclic Event Logger. (v) Priority Source Selection. (vi) Adjustable Time Delay (0.1 Sec to 3 Hrs). (vii) Suitable for 3-Phase as well as 1-Phase sources. (viii) Protections - UV/OV, Phase Sequence, Single Phasing, Frequency. (ix) Terminal Shrouds, Phase Barriers & Source Separator etc. Make : Cat No 1SYN151252R1001 of make ABB or techno-commercially equivalent of L&T/Siemens. The size/rating of all the connected accessories viz. MFM, RYB Indication Lamps, MCBs, 50/5 CT Coils, DG Start/Stop Relay, 12V/10A Battery Charger, OV/UV Relays, 230V Aux Contactor, DG Set Running Indication Lamp, Load ON Mains/DG Indication Lamps etc. of the AMF Panel shall be as per OEM & in conformity with the I/C & O/G MCCBs duly provided with BYPASS system/arrangement complete. | ||||||
| 3.02IMPORTANT NOTES for Item Nos 1 to 3 : 1) Design/drawing/BOM of the AMF panel showing the dimensions is to be obtained from DG SET/Panel board manufacturer/Auth supplier & is to be got approved from Engr-in-charge & GE before placing final order to the manufacturer. 2) The electrical connection of digital Multi Functional Meter in the AMF panel is to be done from load side so that monitoring of various parameters viz. Voltage, Current, KW, KVA, power factor, frequency etc. can be done for both SEB mains & DG mains. 3) The cost of periodical/routine servicing including minor repairs/replacement including periodical checking of the complete AMF panel for the complete defect liability period from the authorized Service Dealer as & when required/due is deemed to be included in the unit quoted rates. 4) The complete installation, commissioning & testing of the AMF Panel is to be got done from the OEM or their auth Rep/Sister Concern/Channel Partners only. 5) Anything missed out in the technical specifications but technically required for efficient working of the AMF Panel is deemed to be included in the quoted rates. 6) Necessary PCC foundation/plinth shall be as per the recommendations of OEM & cost of the same is deemed to be included in the quoted rates. 7) The approximate distance between the DG Set & the AMF Panel shall be within 20 Mtrs & the cost of control cabling etc. from DG Set to the AMF Panel is deemed to be included in the unit quoted rates. 8) The DG Set & AMF Panel shall be completely suitable for switching ON the DG Set whenever EB Supply goes OFF & transfer the load to DG & vice-versa in the event of resumption of EB Supply. 9) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm. 10) The cost of spreader links for MCCBs is also deemed to be included in the unit quoted rates. | ||||||
| 4.00 | Supply, install, commissioning & testing of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 600 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories : [320 KVA DG O/G PANEL] | 1 | Each Job | 1,85,000 ₹1,85,000 Lowest | 3,25,000 ₹3,25,000 | 1,90,000 ₹1,90,000 |
| 4.01BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 700 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 422 to 630 A - 01No. Cat No : DZ7F0630DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. OUTGOINGS : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 422 to 630 A - 02 Nos. Cat No : DZ7F0630DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. (b) (b) MCB, TPN, 10KA, 415V, "C" curve, 16-32 A, ISI marked - 02 Nos (1W + 1S). Make : L&T/ABB/SIEMENS (c) INSTRUMENTATION SYSTEM : (d) (a) Digital type Multi-Function meter with built in selector Switch & 03 Nos CTs matching with the I/C breaker, Accuracy Class - 1.0, 3 phase, Size 96 x 96 mm. Make : Cat No WL411010OOOO of make L&T or techno-commercially equivalent of ELMEASURE/SECURE. (e) (b) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 01 Set. (f) (c) Danger notice plate of size 20 x 15 cm of 1.6mm thick mild-steel sheet, vitreous enamelled white, with letters, figures and conventioinal skul and bones in signal-red colour and fixed with MS clamps, bolts and nuts of approved size, for LT conforming to IS-2551 - 02 Nos (Front & Back). | ||||||
| 5.00 | Supply, install, commissioning & testing of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 600 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories : [315 KVA TR O/G PANEL] | 1 | Each Job | 1,85,000 ₹1,85,000 Lowest | 3,25,000 ₹3,25,000 | 2,30,000 ₹2,30,000 |
Tender Value
₹29.6 L
EMD Value
₹59,180
Closing Date
21 Nov 2025, 6:00 pmClosed
GE (AFA) Hyderabad
GE (AFA) Hyderabad, Dundigal, Hyderabad
SPECIAL REPAIRS/REPLACEMENT TO CERTAIN OLD JUNCTION BOXES AT AFA HYDERABAD
2025_MES_737471_1
8619/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
HYDERABAD
As per NIT
5 documents required · 5 mandatory
₹500
GE (AFA) HYDERABAD
₹59,180
Yes
31 Dec 2025
29 Oct 2025
24 Nov 2025
29 Oct 2025
21 Nov 2025
11 Nov 2025
29 Oct 2025 - 10 Nov 2025
Amount
Supply, install, commissioning & testing of Outdoor Type AMF Panel suitable for DG Set of upto 200 KVA of size 1500 mm (height) x 1200 mm (breadth) x 600 mm (depth) (minimum dimensions) factory fabricated CPRI (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming/Outgoing ACB/MCCB rating (as applicable). The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories
Supply, install, commissioning & testing of Outdoor Type AMF Panel suitable for DG Set of upto 320 KVA of size 1500 mm (height) x 1200 mm (breadth) x 600 mm (depth) (minimum dimensions) factory fabricated CPRI (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming/Outgoing ACB/MCCB rating (as applicable). The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories :
Supply, install, commissioning & testing of Outdoor Type AMF Panel suitable for DG Set of upto 15 KVA of size 1000 mm (height) x 900 mm (breadth) x 500 mm (depth) (minimum dimensions) factory fabricated CPRI (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming/Outgoing ACB/MCCB rating (as applicable). The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories :
IMPORTANT NOTES for Item Nos 1 to 3 : 1) Design/drawing/BOM of the AMF panel showing the dimensions is to be obtained from DG SET/Panel board manufacturer/Auth supplier & is to be got approved from Engr-in-charge & GE before placing final order to the manufacturer. 2) The electrical connection of digital Multi Functional Meter in the AMF panel is to be done from load side so that monitoring of various parameters viz. Voltage, Current, KW, KVA, power factor, frequency etc. can be done for both SEB mains & DG mains. 3) The cost of periodical/routine servicing including minor repairs/replacement including periodical checking of the complete AMF panel for the complete defect liability period from the authorized Service Dealer as & when required/due is deemed to be included in the unit quoted rates. 4) The complete installation, commissioning & testing of the AMF Panel is to be got done from the OEM or their auth Rep/Sister Concern/Channel Partners only. 5) Anything missed out in the technical specifications but technically required for efficient working of the AMF Panel is deemed to be included in the quoted rates. 6) Necessary PCC foundation/plinth shall be as per the recommendations of OEM & cost of the same is deemed to be included in the quoted rates. 7) The approximate distance between the DG Set & the AMF Panel shall be within 20 Mtrs & the cost of control cabling etc. from DG Set to the AMF Panel is deemed to be included in the unit quoted rates. 8) The DG Set & AMF Panel shall be completely suitable for switching ON the DG Set whenever EB Supply goes OFF & transfer the load to DG & vice-versa in the event of resumption of EB Supply. 9) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm. 10) The cost of spreader links for MCCBs is also deemed to be included in the unit quoted rates.
Supply, install, commissioning & testing of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 600 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories : [320 KVA DG O/G PANEL]
Supply, install, commissioning & testing of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 600 mm (depth) (minimum dimensions) factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.0 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv existing panel complete all as specified & as directed with & incl the following accessories : [315 KVA TR O/G PANEL]
BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 700 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 422 to 630 A - 01No. Cat No : DZ7F0630DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. OUTGOINGS : (a) MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 36 KA & of rating 422 to 630 A - 02 Nos. Cat No : DZ7F0630DXD1AOOOO of Make L&T or techno-commercially equivalent of ABB/LEGRAND/SIEMENS. (b) MCB, TPN, 10KA, 415V, "C" curve, 16-32 A, ISI marked - 02 Nos (1W + 1S). Make : L&T/ABB/SIEMENS
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4.0 Core 10 Sqmm incl connecting with suitable glands, lugs etc incl taking down old unsv one complete all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab/Gloster
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 3.5 Core 185 Sqmm incl connecting with suitable glands, lugs etc incl taking down old unsv one complete all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab/Gloster
Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 3.5 Core 240 Sqmm incl connecting with suitable glands, lugs etc incl taking down old unsv one complete all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab/Gloster NOTE for Item Nos 6 to 8 : Quoted rate is deemed to be inclusive of any excavation/earthwork required for taking out of old unsv cables &/or laying of new cables of any size/type.
M&L for HDPE DWC (Double Wall Corrugated) Pipe of rating 450 N, ISI marked with Min OD 77/75 mm & Min ID 63 mm, Orange colour for LT UG Cable protection with & including Couplers with rubber rings & RR & NFP properties/features confirming to IS 16205 Part 24:2018 & IEC 61386 Part 24:2007 complete all as specified & as directed by the Engr-In-Charge. Make : Astral/Supreme/Ashirvad/Finolex
M&L for earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to GI earth strip 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with suitable funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion incl taking down old unsv earthing assy complete all as specified and as directed by the Engr-in-Charge.
M & L for laying earth continuity conductor or main earthing lead of 32x6 mm galvanised iron strip, fixed to wall on batten or recess or chasses or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc, as required all as directed and specified.
M&L for GI pipe light grade with all running fittings (ISI Marked), laid in trenches, under road or fixing on wall/pole/crossing drain/nallah etc. of bore 40 mm complete all as specified and directed. Make : TATA/JINDAL/PRAKASH.
Supply, install, commissioning & testing of Programmable Microprocessor based Control Panel with Touch Screen Display HMI incl electric connection complete all as per existing model & specifications & perfectly suitable for Chiller Unit of Central Type AC Plant Water/Air Cooled of capacity upto 60 TR incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge. Make : Suitable for Voltas/Bluestar AC Plant (as per OEM recommendation & site requirement).
S & F loop in-loop out junction box of internal dimension 140 x 140 x 95 mm or higher size made out of FRP sheet with weather proof canopy and locking screw comprising of 20 Amps rated 4 way connectors for 3 Phase and Neutral incoming/out going mounted in the box, fixing on RCC/Steel poles etc. with & including suitable sized Aluminium/MS clamps, cable glands, lugs, nuts, bolts etc. & fitted with 01 Nos MCB SP 10A, 10KA breaking capacity, C Series incl taking down old unsv one complete all as specified and as directed by Engr-in-Charge. Make of FRP Junction Box : Sintex/CAPE ELECTRIC/HENSEL or techno-commercially eqvt & Make of MCB SP : L&T/Legrand/ABB/SIEMENS.
Important Notes for Item Nos 13 & 14 : (i) Technical Specifications/particulars etc. of the Items is to be obtained from OEM / Auth Supplier & is to be got approved from the GE & Engr-In-Charge before placing final order to the manufacturer. (ii) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates. (iii) All the necessary OEM/Auth Supplier Test Certificates as per relevant IS/IEC incl the Guarantee/Warranty Certificates is to be submitted in Original to the Engr-In-Charge. (iv) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm.
S&F MCB, TP, C-Series 415 Volts of capacity 25-63 Amps with breaking capacity 10 KA & testing incl taking down old unsv one complete all as specified and dircted by Engr-in-Charge. Make-L&T/LEGRAND/SIEMENS/ABB.
Supply, install, commissioning & testing of 3 Pole Power Contactors confirming to IS/IEC 60947-4-1 with AC3 Rating of 40A, Type MNX 40 incl taking down old unsv one complete all as specified and as directed & to the entire satisfaction of Engr-In-Charge. Cat No CS94190 of Make L&T or techno-commercially equivalent of ABB/SIEMENS/LEGRAND.
Supply, install, commissioning & testing of MCCB enclosure with inbuilt Neutral Link for TPN system, IK-08, IP-30 Protection level, Mounting holes for easy wall/panel installation/mounting, Louvers for better heat dissipation with & including MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, 25 KA breaking capacity & of rating 100-125A incl electric connection complete all as specified & as directed to the entire satisfaction of Engr-In-Charge. Make of MCCB Enclosure : Cat No CM90996OOOO of Make L&T or techno-commercially equivalent of ABB/SIEMENS/LEGRAND. Make of MCCB : Cat No DZ0F0125CXC1AOOOO of Make L&T or techno-commercially equivalent of ABB/SIEMENS/LEGRAND
Note for Item Nos 15 to 17 : (i) The make of MCB TP & 3 Pole Contactor & MCCB Enclosure & MCCB should be same. (ii) Quoted rate is deemed to be inclusive of any type of fixing arrangements/welding works of the MCCB Enclosure with & including requirement of any length of cables as per existing size/type required to facilitate electrical connection of the MCCB incl testing complete all as specified & as directed to the entire satisfaction of the Engr-In-Charge. (iii) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates. (iv) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/firm.
Shifting of old unsv LT Panels/Feeder Pillar Boxes/Junction Boxes of any size/type from different Sub-Stns/Pump Houses/AC Plants/DG Installations etc. to MES Storeyard incl making good the disturbed surfaces complete all as specified & as directed to the entire satisfaction of Engr-In-Charge.
Shifting of old/unsv/damaged Solar Street Light Assy incl connected items/fixtures of any size/type/rating from different locations under AoR of GE AFA Hyderabad incl the Sub-Stns/Pump Houses/AC Plants/DG Installations etc. to MES Storeyard incl making good the disturbed surfaces complete all as specified & as directed to the entire satisfaction of Engr-In-Charge. Note for Item Nos 18 & 19 : 1) Unit quoted rates is deemed to be inclusive of the following : (a) Cost of demolition of concrete/foundations/platforms/plinths etc. using manual labours/mechanical equipments etc. (b) Cost of use & transportation of any T&P for the required job incl Crane/JCB/Hydra/Vehicles/Cutters/Welding Machines etc. (c) Cost of transportation of the old unsv LT Panels/Feeder Pillar Boxes/Junction Boxes/Solar Street Assy of any size/type from different locations under AoR of GE AFA Hyderabad incl the Sub-Stns/Pump Houses/AC Plants/DG Installations etc. to MES Storeyard (d) Cost of making good the disturbed surfaces to the entire satisfaction of the Engr-In-Charge. (e) Cost of electrical cable disconnections & subsequest re-connections (if applicable) after the execution of the subject item/job. 2) Anything missed out in the technical specifications but technically required for efficient working/execution of the subject item/job is deemed to be included in the quoted rates. 3) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm.
Srinivasa Consructions (BID ID -3484524)
M/S SRIDEVI ENTERPRISES (BID ID -3475032)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.11 MB
TENDERPAGES8619.pdf
Tender Documents • 0.46 MB
BOQ_825756.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .