A/R and M/O on NH-305 Sainj Luhri Aut Road Km 00/00 to 97/00 (SH- Tarring/patch work with 30mm BC in pot holes between Km 63/00 to 73/00).

Amount

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sum on the prepared bituminous surface cleaned with mechanical broom as per MoRTH specification clause 503. including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a two layer composite construction of crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm as per MoRTH Technical Specification Clause 506 including all incidental charges. Any loss of public/private property during the course of execution shall be the sole responsibility of contractor which shall have to be duly compensated by him at his own cost.

Providing and laying 30mm(thirty millimeter) thick Bitumen VG-10 bituminous concrete with batch type 100-120 TPH(Hundred to one hundred twenty tonne per hour) capacity hot mix plant producing an average output of 75(Seventy five) tonne per hour using crushed stone aggregates of Specified grading premix with bitumen binder at the rate of minimum 5.5%(five point five percent) of weight of mix and filler @ 2%(Twp percent cement of weight of aggregates) as per approved job mix formula, transporting the hot mix material to work site in clean insulated vehicle covered while in transit or awaiting tipping and laying with a hydrostic paver finisher with sencer control to the required grade, level, and alignment ,rolling with smooth wheeled vibratory and tendom roller to achieve the desired compacting as per MORTH specification clause 509 complete including profile correction layer and patching of pot holes including mobilization of plants and equipment by mechanical transport, including haulage of materials with in all leads and lifts with all modes of transportation and as per direction and entire satisfaction of Engineer -in- charge nothing extra shall be paid for higher bitumen contents if required as per job mix formula. Any loss of public/private property during the course of execution shall be the sole responsibility of contractor which shall have to be duly compensated by him at his own cost.

LAXMAN PARMAR CONSTRUCTION OPC PVT LTD

MOHAN LAL

Ashadeep Construction Pvt Ltd