Special repairs to bldg No HT 15 of 2 Corps Recovery Coy under GE North Ambala Cantt

Amount

SCHEDULE A PART I (B/R WORKS) Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and fair smooth without extra cement all as specified and as directed.

Material and labour for rendering, 15 mm thick, in cement mortar 1:4, mixed with water proofing compound @ 2% by weight of cement or as per manufacturer’s instructions, on fair faces of brick work or concrete surfaces of any description finished even and smooth without using extra cement complete all as specified and as directed. Note: Supply only integral water proofing shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying using roller two coats of oil bound distemper over a coat of 3mm thick wall care putty complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Supply and fixing of factory made UPVC white colour Sliding window of area not exceeding 2.00 Sqm each, three track, made of extruded profiles with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm), Sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing of hardware and drainage of wateretc., making arrangement for fixing hardware, EPDM gasket, 1.2 mm +/- 0.2mm thick galvanized steel frame (30mm x18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch lock of zinc alloyed (white powder coated), steel roller system and required accessories complete all as specified and directed. Note:- The unit rate quoted by the contractor exludes cost of wire cloth and glass and includes all other accessories. Net opening will be measured for payment purpose.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down and refixing of aluminium chowkats or frames with shutters area exceeding 1.50 Square metre and not exceeding 4.00 Square metre each after repairing and easing in movement complete all as specified and directed.

Supply and fixing of second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, elc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing of rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necassary cutting, drilling, welding complete conforming to Fe-290.Gde-E-165 complete all as specified and as directed.

Supplying and Fixing for factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing of aluminium anodised, 200mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of aluminium handles, 125mm, cast type, anodised complete all as specified and as directed.

Supply and fixing of mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuls, folll' on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply and fixing of mild steel, 150mm long, ordinary rat rail rod pattern springs for door including roller and roller plate, ISI marked complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250mtr but n exc 500 mtr complete all as specified and as directed.

Material and labour for brickwork, with subclass 'B' bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description, in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debries to distance exc 250mtr but n exc 500 mtr complete all as specified and as directed.

Supply and fixing of pre-painted galvalume, aluminuim zinc coating, GI based corrugated steel sheet, 0.50mm thick, conforming to IS-15961, of any colour as directed, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including taking down of roof sheets as exist at site and removal complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Supply and fixing for pre-painted galvalume, aluminuim zinc coating, GI based Plain steel sheet, 0.50mm thick, of any colour, having tensile strength of 550 MPa, as in roof covering/cladding to wall, fixed with self tapping screws including taking down of roof sheets as exist at site and removal complete all as specified and as directed. Note- The sheets shall have super durable polyester quality paint of approved colour, 150 gm/sqm total on both sides, suitable for exterior application conforming to IS-15965.

Supply and fix GI Metal Suspended Ceiling System at all heights of Perforated with Fleece 600x600x0.5mm TEGULAR EDGE TILES in global white Powder Coated with 60-70 Micron front coating laid on 24mm wide Tee grid – strong section flanges colour white having stitching on the Main Runner, 600 mm and 600 mm Cross Tees with web height of 26mm. The tiles should have Humidity Resistance (RH) of 100%, with Light Reflection of 62%. The main runner spaced at 600 mm max (centre to centre) securely fixed to the structural soffit . Hangers (GI wire of 4 mm dia) to be fixed by approved roof plug, level adjusters and screws etc at 600x600 intervals.The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 600mm long cross tees to be interlocked between main runners to form 600 x 600 mm with grid module(24X38X0.3mm).Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 600 mm cross tees. Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), including PVC clips to hod the ceiling tile including tyaking down of old ceiling of any descriptions as existing and removal from site complete, all as specified and as directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 15mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick, laid on vertical surfaces/skirting/dado, over and including cement screed bed 10mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregate), 75mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint complete all as specified and as directed.

Material and labour for reinforced cement concrete (1:2:4) type B-0, using 12.5mm graded stone aggregates, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete specified and directed.

Material and labour for mild steel TMT bars Fe 500/550D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour, for vibratory compacted, precast cement concrete rubber moulded, coloured (red colour pigment or pigment as approved by GE), interlocking designer paver blocks (double glassy), in milano shape, confirming to IS-15658-2006, 60mm thickness, M-35 grade, as in path, hard standing, etc. laid over and including 25 mm thick well rammed bedding layer of sand and 75mm thick PCC (1:4:8) type D2, using 40mm graded mechanically crushed stone aggregates sub base complete all as specified and directed.

Material and labour for precast reinforced cement concrete (1:1.5:3) type A-1 using 20 mm graded stone aggregates, in kerb stones,landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar cement mortar (1:4) with joints to match including necassary form work complete all as specified and directed.

Supply and fixing of second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessaty' labours; articles not exceeding 200 cu.cm each complete all as specified and directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 100mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 50mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Material and labour for preperation of new plastered/unplastered surfaces of walls, chajjas, balcony, facias, etc. and applying two coats of exterior acrylic emulsion paint over a coat of 1-2mm thick putty complete all as specified and as directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 25.00mm to 32.00mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point (For flourescent Tube/ LH, Bldg Security light, Mirror light)/fan point/bell point controlled by one one way switch complete all as specified and as directed. Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site. (ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No.43 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.43 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per serial item No. 43 above, but for one socket point 15 Amps, with 2.5 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch modular, 6 Amps, one way, one module, single pole, 230 volt complete all as specified and directed.

Supply and fixing of switch modular, 16 Amps, one way, one module, single pole, 230 volt complete all as specified and directed.

Supply and fixing of socket modular, 2/3 pin, 6 amps, one way, two module, single pole, 230 volts complete all as specified and directed.

Supply and fixing of socket modular, 2/3 pin, 6/16 amps, one way, two module, single pole, 230 volts complete all as specified and directed.

Supply and fixing of Television (TV) socket outlet, modular, 2/3 pin, 5 Amps, one way, 2 module, 230 volts complete all as specified and as directed.

Supply and fixing of electronic rotary stepped type fan regulator, 120 watt, 2 module, suitable for ceiling fan, any type/make/sweep complete all as specified and as directed.

Supply and fixing of ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and as directed.

Supply and fixing of lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mm x 75mm for mounting the lamps complete all as specified and as directed.

Supply and fixing of retrofit LED lamp/Bulb of 12 watt B-22 base complete all as specified and directed.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10kA, 'C' curve, 40 - 63 Amps, ISI marked including taking down and removal of old unserviceable MCB of any capacity and type complete all as specified and as directed.

Supply and fixing of MCB, single pole, 240 volts, 50Hz, breaking capacity 10kA, 'C' curve, 6-32 Amps, ISI marked including taking down and removal of old unserviceable MCB of any capacity and type complete all as specified and as directed.

Taking down existing electric meter 10 to 40 Amps from the board and refixing the same on new wooden board at the same location or other location complete all as specified and directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, DBs, SPN, 12 way, transparent acrylic double door, IP 43, as per IS 8623, 240 volts, with and including 200 Amps rated fully insulated copper bus bar fixed on wall duly grouted in solid block wall with and including copper lugs/thimbles duly crimped for connection including taking down old DB with MCBs as existing, complete all as specified and directed.

Supply and fixing of RCBO, 40 Amps, double pole, conforming to IEC-60947-2, 2 module, 300 ma (HI immunity) sensitivity, 230 volts, 50 Hz, with degree of protection IP-20, rated conditional short circuit ICC 10 kA, large size terminal 35 Sqmm flexible to use MCB of any capacity, tripping curve, ISI marked, including taking down existing old unserviceable RCBO/SPN and removing from site complete all as specified and directed.

Supply and fixing of sheet metal enclosures vertical load line TPN distribution board, 4 ways, double door powder coated alongwith 200 Amp rated busbar with and including MCCB 4 pole 100 Amp adjustable type as incomer with suitable size of MS cabinet fabricated by 2mm thick MS sheet and making all type of connections using proper size of gland for incomer cable complete loadline TPN concealed on wall surface & making good the disturbed surfaces as per existing and dismantling and taking down the existing DB's of any type complete all as specified and as directed.

Supply and fixing in replacement of over voltage relay, 230 volts, single phase, adjustable from 170 volts to 230 volts in one module suitable for (1Ph+N) complete all as specified and directed.

Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed in wall or ceiling, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of 6.0 sqmm cable and one run of concealed conduct shall be measured as one unit.

Supply and fixing in replacement channel for fixing of LED tube rod, made of aluminium housing body in CRCA sheet, suitable for 18/20 watt LED tube light, high efficient, AC, 220-240 Volts, 50 Hz, with built in electronic drivers having THD < 10%, connecting up with core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting with and including T-8 LED tube rod 1x18/20 watts, AC, 220-240 Volts, 50 Hz, high efficient T8 with aluminium extrusion heat sink for optimum performance with high lumen efficiency including taking down of old tube rod complete all as specified and directed.

Supply and fixing in replacement of recess/ surface mounted LED flat panel 2' x 2' decorative light fitting with high LEDs and glare free prismatic diffuser, energy efficient provided with including LED 36 watt connected with 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting complete including disconnecting and taking down existing light fitting and removal complete all as specified and as directed.

Supply and fixing of decorative, surface mounted, mirror light, LED tube light wall mounting light fitting, high efficient PMMA diffuser, aluminium housing in CRCA body suitable for and including 10 watt LED tube, high efficient, AC 220-240 volts,50 Hz, and compact and energy efficient, epoxy powder coated, CRCA sheet, connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing old unserviceable light fitting of any description and removal from site complete all as specified and directed.

Supply and fixing in replacement of LED security light luminaire 45 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 1.60 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting and taking down of old fitting with bracket as existing complete all as specified and as directed.

Supply and laying of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 3.5 core, 25Sqmm and laying in trenches including disconnecting and taking down of old unserviceable existing cable and removal complete all as specified and as directed. Note:- Excavation and earth work shall be measured and paid separetely.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- The punned thickness 18cm shall be considered for payment purposes.

Supply and laying un-reinforced, precast concrete cable cover, class LV, type 1, Flat, with peak, size 250 mm x150 mm x40 mm complete all as specified and as directed.

Supply and fixing in replacement of light grade, GI tubing, of size 40mm dia, for cable protection and fixed with clamp to pole and wall with nuts and bolts complete all as specified and as directed.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.

Taking down ceiling or wall fan, sealing cable end, dismantling blades and removing fan and spray painting complete fan including filling cavities with filler with two coats of synthetic enamel paint after cleaning all dust, writing MES No with black colour permanent marker etc. complete all as specified and directed.

Supply and fixing ceiling fan, AC, Single phase, 230 V, 50Hz, 1200mm sweep with BLDC technology with maximum power input 35 W, 5 star BEE ratings complete alongwith all accessories as per OEM with and including down rod canpoy cover and 3 core PVC flexible cable for connections with all electrical connections, complete all as specified and directed.

Supply and fixing of rigid non-metallic PVC conduit, 20mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. concealed in wall/ceiling/floor etc. complete all as specified and directed.

Note:- Amount of credit of Rs. 72,285.00 for retrieved materials is mentioned in Schedule of Credit Page No. 17R of tender documents in pdf form which will be deducted offline while acceptance of tender.

Swami Enterprises

Bairagi Builders

Ashwani Kumar

V K Constructive Builders

M/s Vridhi Construction Co.

Karishan Kumar goel

M/s Kuljit singh bedi