SPECIAL REPAIR TO BUILDINGS AND HARDSTANDING AND PROVN OF STANDBY POWER SUPPLY , SUN SHED AND CHAIN LINK FENCING AT AF STN PATIALA UNDER GE (AF) AMBALA

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises, complete all as specified and directed

Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc, complete all as specified and directed

M&L for,Vitrified coloured ceramic tiles 10 to 12 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for,Vitrified coloured ceramic tiles 10 to 12 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, as in skirting etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete as specified and directed.

M&L for, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for coloured glazed ceramic tiles of size350x250x7mm/450 x 350 x 7mm thick on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded mechanically crushed stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster 1:6 on brick masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement, complete all as specified and directed

M&L for rendering cement plaster 15mm thick and surface of brick work in two layer i(10+5)10mm thick 1st layer and 2nd layer is 5mm cement mortar (1:4) on fair faces of brick work or concrete surfaces using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, finished even and smooth without using extra cement complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid separately.

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.

M&L for preparing of new plastered or un-plastered surfaces and applying two coats of oil bound distemper including priming plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces and applying two coats of oil bound distemper including 3mm thick JK birla wall care putty , complete all as specified and directed.

M&L for preparation for new plastered / concrete wall surfaces, etc. and for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over (camouflage pattern) and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl providing over a coat of wall care putty over plastered surface to prepare the surface even and smooth, complete all as specified and as directed

M&L for complete removal of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying two coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size, including all necessary staging, scaffolding, safety precautions, etc as required to work at any height, complete all as specified and directed by Engineer-in-charge,

M&L for Rendering 5mm thick in (1:3) cm on fair faces of ceiling without using extra cement complete all as specified and directed

M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying one coat of white wash on ceilings complete all as specified and directed.

S&F anodised /powder coated aluminium window / ventilator including aluminium grill made out of hollow extruded section as mentioned below and glazed with tinted glass 5mm thick fixed with glazing clips rubber beading/gasket anodised aluminium beading screw and lock type handles of size 75mm, 2 Nos aluminium tower bolts 150mm long etc complete all as specified and directed with the following sizes:- Chowkat/Frame Size : 101.6x44.45x1.5mm thick Mullion: Not less than 0.55Kg/RM Shutter : Not less than 0.55 Kg/RM

M&L for anodised/powder coated aluminium door and chowkhats made out of hollow extruded aluminium section as mentioned below. Each door shall be provided with 02 Nos disc or D type aluminium handles, 02 Nos aluminium tower bolts 200mm long, one brass mortice lock of six levers with key in duplicate and shall be regulated by provided double action hydraulic floor door spring/hydraulic door closer (Make sandhu/RITZ). Shutter to be partly glazed with and including 5mm thick tinted glass and partly panelled with and including 12mm thick prelaminated particle board with decorative laminations on both sides, rubber beading/gasket, anodised aluminium beading, screws complete in all respect all as directed by the Engineer-in-charge. Chowkhat/frame : 101.6x44.45x1.5mm thick Shutter top and bottom rail : 114.3x44.45x1.5mm thick Shutter middle rail : 83.5x44.45x1.5mm thick Shutter vertical/style : 83.5x44.45x1.5mm thick MAKE : (i) Anodised aluminium section : JINDAL, HINDALCO, INDALCO (ii) PARTICLE BOARD : NOVAPAN, KITPLY, BHUTAN BOARD (iii) Glass : saint Gobain, modi guard, TATA.

S&F Solid PVC Door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with 19mm x 19mm M.S. Square tube profiles are mitred cut at corners and joined by inserting 2 Nos 150 mm long brackets of 15mm x 15 mm MS square tube shall 19 mm x 19 mm in square tubes and suitably screwed suppling & fixing in opening, complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site complete as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frame (doors/windows) of any description not exceeding 0.50 Sqm each (without taking off shutters from the frames) complete as specified and directed.

Taking down chowkats or frame (doors /windows) of any description exceeding 1.5 Sqm each and not exceeding 4 Sqm (without taking off shutters from the frames) complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc or insulation boards/slabs/blankets,any thickness including cover fillets, complete all as specified and directed

S&F of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge. NOTE : -Unit rate quoted against this item shall also include taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings, complete all as specified and directed

S&F 5 mm thick PVC Sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete all as specified and directed

Material and labour for preparing surfaces of new or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed

M&L for Machine cut kota stone slab flooring18-20mm thick, using single piece kota stone slab in treads/floor etc. as in flooring/ Treads, laid over and including screed bed 15 mm thick in cement mortar 1:4 set and jointed with grey cement slurry or with adhesive as per manufacturer's instructions mixed with pigment to match the shade of the slab including rubbing and granite polishing achieve mirror finish ,rounding off the edges and cutting two grooves (serration),complete all as specified and as directed.

M&L for machine cut Kota stone slab/tiles 18-20mm thick, on vertical surface as in skirting/dado /steps riser/pillars etc, laid over and including rendering 10 mm thick in cement mortar 1:4 set and jointed with grey cement slurry or with adhesive as per manufacturer's instructions mixed with pigment to match the shade of the slab including rubbing and granite polishing achieve mirror finish,including rubbing and polishing, Incl dismantling existing plastering and removal of debris out of premises etc. complete all as specified and as directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

M&L for dismantling water tank exceeding 500 but not exceeding 1000 Litres capacity and removing to store, complete all as specified and directed

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specified and directed..

S&F in repairs Vitreous China Urinal, half stall type, white, (excluding flushing cistern and flush pipe and waste pipe complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, flat back, size 640x450mm excluding taps, waste , chain and plug and porcelain stopper but including brackets complete all as specied and as directed by Engr in Charge

S&F in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and directed

S & F Angle stop cock fancy type CP with long shank 15mm bore as in repairs complete all specified and directed.

S & F 15 mm bore Concealed stop cock fancy type CP with long shank and cup washer as in repairs complete all specified and directed.

S&F, in repairs, 15mm brass chromium plated fancy type bib cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed

Demolition of mud phuska in roof any thickness and lowering down and removing complete all as specified and directed

Dismantling roof brick tiles or terracing tile single layer complete all as specified and directed

M&L for rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair on in cement mortar (1:3), using water proofing compound as per recommended ratio, after brushing cement slurry complete all as specified and directed Note:- water proofing compound shall be measured and paid seperately

M&L for PCC type B-1 (1:2:4), using 20 mm graded mechanically crushed stone aggregates as in roof kerbs or mud stops, rounded or chamfered on edges surface channels and drains,Filling of MS sheet chowkats ,roof padding complete all as specified and directed.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm & adjoining vertical surfaces over clean RCC/plastered roof surfaces complete all as specified and directed

M&L for 40 mm thick brick tiles laid on cement mortar (1:6), 15 mm thick and joints filled with flush pointing in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on complete all as specified and directed

Supply only water proofing compound, complete all as specified and directed

M&L for Cutting groove in parapet wall 75 mm wide and 65 mm deep, complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved having tensile strength of 550 Mpa and grade AZ 150 as in roof covering and cladding complete all as specified and directed.

Dismantling of mild steel work or wrought iron of any description in any position complete all as specified and directed.

M & L for MS work in tubular/ roof trusses (framed) trussed, purlins ,crane gantries,rails , stanchions and fastenings and heavy bracket framing (beam ,tee, channel, angle or flat section confirming to Fe-410-W (Gde-250 quality A) all asspecified and directed.

M&L for brickwork with sub class 'B' Bricks (old size), straight or curved on plan exceeding 6m mean radius, built in CM 1:4,complete all as specified and directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer - in - Charge.

Demolition and breaking up 150 mm dia drain pipes, including bed concrete for Salt glazed ware, UPVC, AC, or Reinforced cement concrete pipes, set in cement mortar and removing the rubbish outside MD land complete all as specified and as directed. Note: Necessary excavation and earthwork will be measured and paid for separately under respective items.

M&L for Plain cement concrete bed to 150 mm bore drain pipe including packing under and haunching against the sides of pipes, after they are laid and tested, with plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M& L 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid under trenches jointed in CM (1:1) complete all as specified and as directed.

M & L for cutting into existing man holes for connecting new drain pipe of 150mm bore SGSW pipe incl making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed.

S&F in repairs 8mm dia Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified and directed.

S&F in replacement toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge.

S&F Towel ring 200 mm dia chromium plated fancy type conforming to the sample kept in the office of Engineer-in-Charge.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm IN REPAIR, complete all as specified and directed.

Supply and fixing steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (AF) Ambala.(ii) Glazing & wire gauge shall be measured and paid separately.

Cleaning of the under ground sewer line upto 150mm dia of any type all in working/running conditions involving removal of blockage of any kind lines by means of mechanical rodding with vibrations/drilling concept i.e trolley mounted motorized sewer cleaning machine including desludging descaling and dechoking whereever reqired, flushing the entire stretch with combined high pressure water jetting cum suction (vaccum) type machine suitably mounted on HCV having facilities of hydraulic applications throught high pressure thermo plastic fibre based water jetting hose and through conical/round shape nozzle pipes, making the stretch clean and functional and removal/deposition of sludge inclusive of solids if any & sludge water to a distance not exceeding 500 mtrs beyond the periphery of defence land and covering the entire sludge and solids with local sand/earth all as directed.

Demolition of plain cement concrete (un-reinforced) in gound floors and paving not exceeding 15 cm thickness (below or above ground level) including removal of debries to distance exc 50 mtr n exc 250 mtr, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregate as in subbase of floor complete all as specified and directed.

M & L for 100 mm thick PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in flooring finished even and smooth without using extra cement, complete all as specified and directed.

M & L for providing 3mm thick metalic/stone dividing strips and 28mm deep, inserted in position, conform to design, complete all as specified and directed.

S & F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and grade AZ 150 as in ridge to roof, fixed with self taping screws complete all as specified and directed.

S&F for MS screw bolts any size (machine made) with hexagonal square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm but not exceeding 10 cm long complete all as specified and directed.

S&F for bands,straps, hold fasts ; wall ties, plate washers and similar small articles confirming to Fe-209 Gde-E-165 complete all as specified and directed.

M&L for PCC (1:3:6) type C1, using 20 mm graded mechanically crushed stone aggregates as in filling of MS sheet chowkats, fixing of hold fast and window, chajja etc including making the surface good and even, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finsihed even and smooth without using extra cement, complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soils, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded mechanically curshed stone agreegate as in bed blocks to fencing post/columns, complete all as specified and directed..

S&F Rolled mild steel sections as in posts and struts/ flat iron for support, in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

S&F , round bars etc, in available length complete conforming to Fe-290 (Gde-165) complete all as specified and directed. Note 10mm dia mild steel round bars 3 Nos shall be provided horixontally by inter weaving in the chain link and fixed with mild steel screw bolts with MS flat complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. Note : supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.

Supply only MS galvanised chain link fencing of 50x50mm mesh size and 3mm dia wire complete all as specified and directed.

S&F mild steel screw bolts(machine made) exceeding 5cm and not exceeding 10cm long with diameter of shank 11 to 15mm with hexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete all as specified and directed.

M&L for New or previously un treated steel Surfaces of any description, not exceeding 10cm in width or girth when unconnected with other painting or when painted in a different tint applying two coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M & L for form work to concrete surfaces in footings, bases of columns plinth beams, etc. foundations and similar work rough finish, complete all as specified and directed.

M&L for form work to sides of pillars , posts, struts,piers, columns and stanchions etc. and similar work complete all as specified and directed.

M&L mild steel TMT bars10mm dia,and overcut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips equality conforming to Gd.I,IS-432(Part -I) complete all as specified and directed.

M&L mild steel TMT bars to 5 to 10mm dia,cut to length, bent to shape required, as in stirrups and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips equality conforming to Gd.I,IS-432(Part -I).as in stirrups, complete all as specified and directed.

M&L RCC Nominal Mix Type B1 1:2:4 (20mm graded mechanically crushed stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and directed.

M&L for RCC Nominal Mix Type B1 1:2:4 using 20 mm gradded mechanically crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and directed.

M&L applying two coats cement base paint on wall including preparing new plastered surface complete all as specified and directed.

M&L for MS framed work as in doors or gates, grill, grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete including locking arrangement of stainless steel frame work all as specified, including , rebating, bolting, paneling and fixing complete all as specified and directed.

Surface excavation not exceeding. 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Removing excavated soil to a distance exceeding 1.5 km but not exceeding 5 km including loading , unloading into vehicles and depositing where directed including spreading and levelling complete all as specified and directed.

M&L for hard core brick broken of gauge exceeding 63 mm but not exceeding 100 mm, deposit spread and levelled in layer not exceeding. 150 mm thick watered and ramming to a true surface, complete all as specified and directed..

M & L for Providing cement concrete in edges Type B1 1:2:4 using 20 mm graded mechanically crushed stone aggregate in roof kerbs or mud stops,rounded or chamfered on edges complete all as specified and directed.

M & L for 25 mm thick sand filling / Cushing for bed of interlocking tiles watering and consolidation complete all as specified and directed.

M & L for Machined pressed precast concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with Grey cement and no pigment complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 (using 12.5mm graded mechanically crushed stone aggregate) as in coping/ bed plate/ bed block including necessary forms and moulds.

M&L for Brick work with sub class 'B' bricks, using old size bricks straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for sub main wiring concealed type with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 4 sqmm drawn through and including non - metallic rigid PVC conduits of suitable size with all necessary fittings and provision of one run of 4 sqmm PVC insulated unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly, complete all as specified and directed. Note: Two runs of 4sqmm cable, one run of 4 sqmm earth conductor cable and one run of PVC conduit shall be measured and paid together as one unit length.

M&L for sub main wiring concealed type with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 6 sqmm drawn through and including non - metallic rigid PVC conduits of suitable size with all necessary fittings and provision of one run of 6 sqmm PVC insulated unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly, complete all as specified and directed. Note: Two runs of 6sqmm cable, one run of 6 sqmm earth conductor cable and one run of PVC conduit shall be measured and paid together as one unit length.

All as per BOQ srl item No.108 here-in-above but for One 05 Amps socket outlet on independent board complete all as specified and directed.

All as per BOQ srl item No.108 here-in-above but for One 05 Amps socket outlet on the same board with other switches complete all as specified and directed.

All as per BOQ srl item No.108 here-in-above but wiring with 2.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor and with one run of copper conductor PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete for one 15 Amps power socket point on independent board all as specified and directed.

S&F modular White cover plate with frame,1 module complete all as specified and directed.

S&F modular White cover plate with frame,2 module complete all as specified and directed.

S&F modular White cover plate with frame,3 module complete all as specified and directed.

S&F modular White cover plate with frame,4 module complete all as specified and directed.

S&F modular White cover plate with frame,6 module complete all as specified and directed.

S&F modular White cover plate with frame,8 module complete all as specified and directed.

S&F modular switch 1 way 6A, 230 Volts, 1 module.complete all as specified and directed.

S&F Modular socket, 6A-2/3 pin 2 module .complete all as specified and directed.

S&F modular switch 1 Way 16A, 230 volts, 1 module.complete all as specified and directed.

S&F modular socket 6/16A, 2/3 pin 2 module.complete all as specified and directed.

S&F Modular Bell push 6A 1 module.complete all as specified and directed.

S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

S&F Metal flush box 1/2 module complete all as specified and directed.

S&F Metal flush box 3 module complete all as specified and directed.

S&F Metal flush box 4 module complete all as specified and directed.

S&F Metal flush box 6 module complete all as specified and directed.

S&F Metal flush box 8 module complete all as specified and directed.

S&F ceiling rose, PVC body, 3 terminal suitable for 230 volts AC supply, complete all as specified and directed.

M & L for modular fan regulator electronic step type, 230 Volts, suitable for 1200 mm sweep ceiling fan, complete all as specified and directed. 2 module. complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair lamp holder,insulated body, with back PVC rectangular block for fixing of holder with screw complete all as specified and directed.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Taking down fan, regulator, sealing cable end, dismantling blades and removing fan and blades to store and M&L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed

Taking down fan,cable end, dismantling blades and removing fan and blades to store and M&L for Painting of exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and Fixing only exhaust fan (M.D.supply) and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed

M&L for rewinding of following fans (BOQ item No. 138 & 139) with same gauge of super enameled copper wire complete,varnishing ,baking , connecting properly with sleeves assembling the same including replacement of unserviceable shackle and clamps with nots /bolts/washer /split pin and blade screws etc testing,complete all as specified and directed. NOTE: The rates shall be deemed to include Spare parts like bearing, capacitor, bushes if required and reassembling after repair /replacement of worn out parts

Ceiling fan 1200 /1400 mm sweep

Exhaust fan 300 mm sweep

S&F MCB DB TPN 8 way with, 415 V, double door type and including flush in wall to fix the MCB DB, complete all as specified and as directed.

S&F TPN MCB 4 Pole, 415 V, fixed type, 25 to 63 Amps with breaking capacity 10 KA of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F TPN 16 To 32 AMP 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F sheet metal enclosures for MCB distribution board 230V, SPN, 8 way, double door type flushed inside wall with 200A rated bus bar and making good the disturbed surfaces complete all as specified and as directed

Taking down of split type air conditioner from existing location and installation after repair in same position/ other location including gas charging , testing , commisioning and comprising of following. (a) Replacement of refrigerant tubing with insuating sleeve upto 6RM with brass flair nut. (b) Drain pipe upto 6RM (c) Air conditioner bracket-1 set (d) interconnecting cable from indoor unit to outdoor unit

Taking down carefullly TPN/SPN DB of any rating including MCB TPN /SPN/SP of any rating and kept in safe custody during execution of work and refixing in the same wall including making good disturbed surface complete all as specified and directed.

Taking down carefullly Lightening arrester any type with Copper / aluminium / GI strip and insulator from LA to earthiing and kept in safe custody during execution of work and refixingl including making good disturbed surface complete all as specified and directed.

M&L for air termination single pointed aluminium rod 12 mm dia, 300mm long duly fixed/secured with PCC or with GI pipe supports complete all as specified & directed.

M&L test point terminal block made of gun metal or phosphorus bronze size 75mm x 75mm x 25mm drilled and screwed with and including 3 Nos., 8mm dia, 25mm long hexagonal head screw complete all as specified & directed.

S&F aluminium strip 25mm x 3mm with saddles and fixing screws etc for roof conductors and down conductors above ground etc complete all as specified & directed.

S&F Copper strip 25mm x 3mm with saddles and fixing screws etc for roof conductors and down conductors above ground etc complete all as specified & directed.

S& F Single pole and neutral metal enclosure with a two pin and earth plug and socket complete with one MCB SPN 20 Amps C curve complete all as specified and directed.

Taking UP/down the existing cables any description from trenches /poles/ walls etc complete all as specified and directed.

Excavation in trenches for foundation not exceeding 1.5 meter wide and exceeding. 1.5 meter depth but not exceeding 3 m depth and not exceeding 10 sqm on plan and getting out in soft/loose soil for laying cable of defferent size etc complete all as specified and directed.

Returning, filling-in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material(soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L filling approved river sand in trenches for sand cushioning of laying of cables to the full width of excavated trench 08 cm thick before laying the cable and 15 cm above the cable, gently punned down, stretching and testing of cable on transformer yard etc complete all as specified and directed. Note :- Thickness of sand cushioning after punning down i.e 18cm shall be measured for payment.

Supply and laying well burnt fire Bricks of size 230x115x75 mm, locally available best quality (sub class "B" bricks) laid in trenches with 230mm side perpendicular to U/G cable for cable protection complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 4.0 core X 16 Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed

Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 4.0 core X 25 Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed

M&L for boring/auguring suitable hole & insertion of 50 mm dia GI pipe including supply and inserting GI pipe light grade 50mm laid in trenches with necessary MS clamp, bolt, nut, washer not less than 600 mm below existing PCC/road/hard standing complete all as specified and directed. Notes:-(a) Cost of equipment, tools & plants & material required for boring shall be deemed to be included in the rates quoted

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core. Complete all as specified and directed.

S&F in replacement Bus Bar Chamber of size 60 x 60 x45 cm suitable of 3 phase 433 Volts outdoor type made out of 3.15 mm thick M S Sheet with 200 Amps rated aluminium busbar (4 Nos ) PVC sleeves and coloured (Red,Yellow,Blue and Black) compatible for one ON Load Changeover switch and One MCCB with locking arrangments and angle iron stand of size 40 x 40 x 6mm frame grouted in ground with PCC foundatiuon 1:2:4 type C1 with 20mm graded mechanically crushed stone aggregate alongwith all necesary cable connections,lugs and cable gland including 2 coat of paint over a coat of red oxide primer complete all as specified and directed. Note: Changeover Switch and MCCB are measured and paid separately.

S&F ON LOAD changeover switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps. Complete all as specified and directed.

S&F, 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA. Complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. complete all as specified and directed. Note: Main Earthing Lead and Protection GI pipe from earth electrode to test point up to 7.5 m is to be provided and the cost for the same shall deemed to be included in the above quotedrate. earthing lead beyond 7.5 m shall be measured and paid for separately under respective item.

S&F MCB DB TPN 4 way with, 415 V, double door type and including flush in wall to fix the MCB DB, complete all as specified and as directed.

Supply and fixing SPN 16 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complet all as specified and directed

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

S&F sheet metal enclosures for MCB distribution board 230V, SPN, 4 way, double door type flushed inside wall with suitable rated bus bar and making good the disturbed surfaces complete all as specified and as directed

Please Enable Macros to View BoQ information