Provision of water proofing treatment and antistatic flooring and provision of door window shutter and its builders hardware work at hydraulic press bldg inside factory at O. F. Bhandara.

Amount

Reinforced cement concrete (design mix)in:-M-25Slabs supported on walls,beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the likeconcrete complete all as specified and as directed by the Engineer-in-Charge (20mm graded aggregates)

M & L for applying two coats of bituminus based aluminium paint over water proofing membrane as directed by E-I-C

M& L for liquid water proofing compound and mixing in wet concrete as directed by E-I-C

M& L for application of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) . Preparation and priming the surface by forced application and bituminus aluminium paint,Including Dismentling & Re-Fixing of Metallic Strips of LP System etc complete all as specified.

Bitumen primer for use in waterproofing and damp-proofing treatments

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (110 mm Bore im )

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement morter 1:4 complete all as specified and as directed by the engineer -in-charge.(Modular bricks)

PVC (SWR) bends any radius 110 mm

M&L for bitumen mastic antistatic flooring/ vertical surface 25 mm thick with matt finish in floor confirming to IS - 8374 (1977 ), IS - 1195 ( 2002 ) and IS - 1196 (1978 reafferiming 2001), with application of bitumen primer and 32 gauge brass strip 25 mm wide laid @ 300 mm C/C both way and fixed with brass screw and grits including testing of floor/ Vertical for electric resistivity in between 50x10 ³ ohms 2X10 ⁶ ohms also including Aluminium Bituminus paint etc. all as per Attached Annex. "A" and directed by EIC.

M & L for rendering 25mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces & is to be finished even and smooth complete all as specified and as directed by the Engineer-in-Charge

S & F 40mm thick, Ist class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged); fitted to chowkats complete all as specified & directed by E-I-C.

Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as directed by E-I-C.

Rough cast wired glass, 6.4mm thick and glazing with oil putty in square (n exc 0.5sq.m)

S & F butt hinges 150mm size, type B-12, extruded brass, with mild steel hinge pin, bright polished complete all as specified& directed by E-I-C.

S & F butt hinges 100mm size, type B-12, extruded PARLIAMENT HINGES brass, with mild steel hinge pin, bright polished complete all as specified and as directed E-I-C.

S & F 375mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and as directed by the Engineer-in-Charge

S & F 300mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified

S & F 150mm extruded brass handles, fabricated type polished complete all as specified and as directed by the Engineer-in-Charge

Floor door stopper of aluminium alloy 150 mm body and tongue, anodised, with hard drawn steel spring, fixed in floor

M&L for Brickwork Modular Bricks with fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement morter 1:4 complete all as specified and as directed by the engineer -in-charge.

S& F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410- W(Gde- E-250) quality

DARSHAN SINGH PLAHA

Mangla And Mangla Construction