Reactivation of 0.20 Lac Gallons Service Reserviour by way of RCC Jacketting and cost of protection wall behind service reserviour for WSS Augmentation Nowpora Batlipora Under District Sector

Amount

Dismantling roofing including ridges, hips valleys and gutters etc and stacking the material within 50metres lead of: G.S Sheet

Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height, of sectional area 40 square centimetres and above including stacking the material within 50 metres lead

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50metres lead.

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excld. the cost of centring, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20mm nominal size)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc not exceeding 1.5mtr in width and for shafts wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5mtr. All kinds of soil

Providing and laying stone soling hand packed on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 4 : 8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) crushed.

Centering and shuttering including strutting, propping etc, and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Centering and shuttering including strutting, propping etc, and removal of form work for: Suspended floors, roofs, landings, balconies and access plate form

Extra for shuttering In circular work (20 % of respective centring and shuttering items): Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone agg. 20mm nominal size) Crushed

Providing and fabrication of M.S angle iron lid of size 0.9 Mtrx1.20Mtr M.S angle iron lid made out of 40x5mm angle iron frame and diagonal pieces and 3mm thick iron sheets duly welded with locking arragements and handles and applying a priming coat of red oxide complete job.

Providing and fixing of double flanged C.I sluice valve conforming to I.S 780 of 1984 standard make kirlosker PNI type incl. cost of nuts, bolts, R.I cloth all sorts of carriages upto site of work, cost of pedestal tail pieces all leads etc complete job . i) 150mm dia

Providing and fixing of double flanged C.I sluice valve conforming to I.S 780 of 1984 standard make kirlosker PNI type incl. cost of nuts, bolts, R.I cloth all sorts of carriages upto site of work, cost of pedestal tail pieces all leads etc complete job . i) 100mm dia

Fabrication of M.S manifold made out of 150mm dia M.S pipe including fixing of flange for various supply lines including all sorts of specials required for completion job (as per the directions site Engineer)

Providing and fixing of M.S flanges (12mm thick) to 100mm dia G.I pipes including cutting of pipes, welding of flanges incld. c/o flanges, rubber gasket, nuts, bolts and all sorts of carriage Complete job

Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

12mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 coarse sand).

Providing and fixing of G.I bend with blind flanges/sheets welding making perporation as vent hole (65mm dia) complete job

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Cement/Steel from Divisional store for avg. lead 15 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Sand for avg. lead 25 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Agg. 20mm for avg. lead 50 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Agg. 40mm for avg. lead 50 kms

Carriage of materials by manual labour from dumping site of work upto actual site of work including loading, unloading and stacking of material avg. lead 200 mtr. Cement

Carriage of materials by manual labour from dumping site of work upto actual site of work including loading, unloading and stacking of material avg. lead 200 mtr. Steel

Carriage of materials by manual labour from dumping site of work upto actual site of work including loading, unloading and stacking of material avg. lead 200 mtr. Sand + 20mm agg.

Carriage of materials by manual labour from dumping site of work upto actual site of work including loading, unloading and stacking of material avg. lead 200 mtr. 40mm agg.

M/s B.M.C GROUP OF ENGINEERS