Renovation of Control room, Office building and others allied civil work at Birsingha 132/33 KV Sub- Station under Midnapore Area Office, WBSETCL

Renovation of Control room, Office building and others allied civil work at Birsingha 132/33 KV Sub- Station under Midnapore Area Office, WBSETCL

Percentage BoQ

BoQ_Ver3.0

NIT No.:- CE/(O&M)–II/BIRSINGHA/CIVIL/ 2025-26/30, DATED 30.12.2025

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In Ground floor including roof

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. a) In Ground floor including roof

Removing of existing tarfelt treatment carefully chieseling without damaging the main roof including cleaning the roof and removed the rubbish from site as per direction of E.I.C.

Dismantling carefully terraced floor only (including floor finish if any) or lime terracing in ground floor roof and removing rubbish as directed within a lead of 75 m.a) In Ground floor including roof

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Uprooting and removing plants from the surface of walls ,parapet ,roof etc and making good damages.

(a) Small plant of girth of exposed stem upto 75 mm lift upto 6 m

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming themsides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(a) Depth of excavation not exceeding 1,500 mm.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

i) Do - by fine sand

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Cement concrete with graded stone ballast (40 mm size excluding shuttering) in proportion1:3:6 In ground floor.Pakur Variety

Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacture's specification.

Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes Pakur variety(Use for Screed Concrete)Pakur Variety

Ordinary cement concrete mix (1:2:4) M15 with graded stone chips (20 mm down) excluding shuttering and reinforcement if any in Ground floor. Pakur Variety

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety

Brickwork with 1st class in cement mortar (1:6) a) In foundation and plinth.

b) In superstructure

125 mm th brickwork with 1st class cement mortar (1:4)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)

(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

(b) 25 mm to 30 mm shuttering without staging in foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Tor steel /Mild steel SAIL/TATA/RINL

Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.With 1:6 cement mortar

(a) 15 mm thick plaster

(b) 20 mm th plaster

(c) 10 mm th plaster(1:4)

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed

Labour for Chipping of concrete surface before taking up Plastering work.

Supplying ,fitting &fixing Marble slab/tile of 15to18 mm thickness in floor, stair,landing & treads etc. over 20 mm (av.) thick base of cement mortar(1:2) laid with white cement slurry @4.4kg/Sq.m before placing marble & jointed with White cement slurry @2.0 kg/Sq.m with necessary pigments including grinding and granite polishing as per direction of Engineering-in -charge. (White cement and pigment to be supplied by the Agency)With makrana plain pink/ Adranga pink/ Garbh Gulabi/Udaypur pink/Udaypur Green/ Black Bhaslana

Area of each slab/tile exceeding 0.30 Sq.m. but not exceeding0.6 Sq.m.

Supplying,fitting and fixing 1st quality ceramic tiles in walls and floors to match with the existing work &4 Nos of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if nacessary or synthetic adhesive &grout materials etc.

A) Floor

With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.

Area of each tile upto 0.09 Sq.m.i) coloured decorative (any shade except white)

a) Gr. Floor

b) 1st Floor

(B) Wall.

With Sand cement Mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @2.91 kg/Sq.m & joint filling using white cement [email protected]/Sq.m.a)Area of each tile upto 0.09 Sq.m.i) coloured decorative (any shade except white)

a) Gr. Floor

b) 1st Floor

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc.set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after any backing course) laid after application slurry using 1.75 Kg of cement per Sq.M below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).any backing course) laid after application slurry using 1.75 Kg of cement per Sq.M below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor)

I)With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.Light Colour

i) Gr. Floor

ii) 1st Floor

(II) With Polymerised Adhesive [6 mm thick] & epoxy grouting materials for filling joints including spacer-2 mm[Applied directly over finished artificial stone floor/ mosaic etc.]Light Colour

i) Gr. Floor

ii) 1st Floor

Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling]Red Variety (i) 25 mm. thick

80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006(over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge.[Note: Subgrade CBR shouldnot be less than 5]

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)a) One Coat.i) Water based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. a) One coat

i) In Ground floor

ii) In 1 st Floor

iii) 2nd Floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Premium 100% Acrylic Emulsion

i) Ground floor

ii) 1St Floor

iii) 2nd Floor

Supplying ,fitting & fixing Eco-friendly, Heat Resistance and Incombustable Gypsum plaster board/tiles ( Density > 700Kg per Cu.m.) confirming to IS 2095- Part 1, 2011 of size 595mm X595mm of approved design & brand placed in the Grid module to form a false ceiling, all complete as per drawing & direction of Engineer - in- Charge. False ceiling with (i) 12.5mm thick Square edged heat resistance Gypsum Plaster Board/tiles with vapour control film

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975 ;Annodized (with required flim thick ness and specified colour/natural) matt finished conforming to IS:1868-1983 for fabrication of composit dor,sliding and casement windows, partitions,formed of basic sections of any ISI embossed/ certified make and brand as per direction of the Engineer-in-charge.

(A) In 10-12 Micron thickness Annodiz ing flim.

I) Natural white

a) 2-track sliding window.

i) Bottom frame.

ii) Top and side frame.

b) 3-track sliding window.

i) Bottom frame.

ii) Top and side frame.

c) Shutter for all track sliding window.

i) Bottom & Top member.

ii) Style side member.

iii) Interlock member.

(B) Fixed glazing.

i) Top,bottom & side member.

ii) Mullion.

iii) Glazing clip.

Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium section for the following units:-Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sections,febrications, including cutting to proper shade and size,drilling and aligning of window shutter frame fitted with in built locking arrngements,sliding rollers and other necessary fittings,fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work(walls,column, beam, lintels etc.)as well as between glass and shutter frame for fixing glass and poly shulphate sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing,specification and direction of EIC.The rate includes the hire charge of all tools and plants,including all incidental charges,adhesive, joineries such as screw, cleate,angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, locking arrangement and rollers.

i) 2 track sliding window.

ii)3/4 track sliding window.

iii) Fixed glazzing.

Supplying PVC rollers for sliding windows as per direction of Engineer in charge.

Supplying maruti lock(100 mm)

Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.

i) For sliding windows.

a) 'T' shaped EPDM gasket for frames.

b) 'U' shaped EPDM gasket for frames.

Supplying bubble free float glass of approved make and brand conforming to IS:2835-1987.

i)5mm thick clear glass.

Supplying, fitting and fixing steel rolling shutter profile type with18 B.G.of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I.Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup sideguide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.

Labour for taking out(only rolling portion) rolling shutter

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.

i)UPVC pipe 110 mm dia

ii) Plain Y 110 mm

iii) Bend 87.5 degree 110 mm

iv) Shoe 110 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length.A)110 mm

B)Fittings

i)Coupler 110 mm

ii)Plain Tee 110 mm

iii)Bend 87.5º 110 mm

iv) Vent Cowl 110 mm

v) 110 X 110 P Trap 75 mm

vi) Round Jali

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.A) Above ground

B) Under ground

Repairing crack in wall by cement grouting (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface. (Cement-69 Kg/100 m)

Stitching crack in brick wall by carefully cutting out face brick 125 mm. deep into the wall, cleaning the gap and filling up the same with precast cement concrete block carefully set in cement mortar (1:3) including mending good damages and finishing the surface to match with adjacent areas complete as per direction. (i) With plain cement concrete blocks (1:1½:3) with stone chips.Block size 250 x 125 x 75mm.Cement-1.85 Kg/No.)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m

Supplying,fitting and fixing in position approved P.V.C. door frame (matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mmx 50mmx 2mm (+_0.2mm) horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube, 40 mm x 20mm x 1.20mm will be inserted on one full vertical side of the frame (hinge side)as reinforcement, the frame will then be fixed in the opening with the help of P.V.C.expendable fastner wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.

PVC Door Shutter-37mm thick:Supplying, fitting and fixing P.V.C. door shutter of approved quality &shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0mm (+_0.2mm)wall thickness, the section will have 2 Nos. built in beads. horizental &vertical section shall be fixed to each other by self tapping screws and2 nos of soild platic or M.S. tubular galvanised brackets of length 200mmx 80mm and other 100mmx100mm both 1.20mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mmx 37mm with2.0 mm(+_0.2mm)wall thickness will fitted in the middle as lock rail reinforced by solid polymer bar of 200mm long at both ends & screws for both sides.The section frame will then be fitted in by prepanels of size 100mmx20mm, with wall thickness 1.2mm (+_0.2mm) and 2 nos of 6mm dia bright rod will be inserted horizentally with both side check and nut system and stretches where fixing of hinges/hasp bolt/tower bolt/ door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt,tower bolt, door ring etc. In ground floor.

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface : With super gloss (hi-gloss) -Two coats (with any shade except white)

(b) On steel or other metal surface : With super gloss (hi-gloss) -Two coats (with any shade except white)

Supplying,fitting&fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts,nuts etc.a) With 'S' trap.

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats ofapproved paint.450 mm X 300 mm size

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut.(i)15 mm dia 600 mm long

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)

Renewing and supplying ,fitting, fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand)

Renewing and supplying ,fitting ,fixing CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO Neo/smile brandof Jhonson or similar brand).

Renewing and supplying ,fitting ,fixing Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

Renewing and supplying ,fitting ,fixing Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

Renewing and supplying ,fitting ,fixing PTMT Pillar Cock - 15 mm. (Prayag or equivalent).

Renewing and supplying ,fitting ,fixing PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007

iii) 25 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respectincluding cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes,making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect(Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.

(a)35 mm thick shutters (single leaf)

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps.Sal : Local.

a) In Gr Floor

b) In 1 st floor

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)40mm X 6mm, 125mm Length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark

a) 75mm. X 40mm. X 1.12mm.

b) 100mm. X 50mm. X 1.25mm.

Iron socket bolt of approved quality fitted and fixed complete

a) 100mm long x 10mm dia bolt.

b)150mm long x 10mm dia bolt

Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting

a) 300mm long

Iron door ring of approved quality fitted and fixed with nut and washer complete

a) 50mm dia.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:With continuous plate base (Hexagonal/ Round rod)

i)100 mm grip x 10 mm dia rod.

Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass. 25 mm dia. and 600 mm long

Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm.

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe

Renewing high pressure polythene ball cock of approved quality with polythene ball and aluminium lever complete for pipe of dia.:25 mm

Taking out carefully existing gypsum plaster board /tiles from ceiling of control room and PLCC room stacking serviceable material at site and removing rubbish as directed within a lead of 75 m.

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m

Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only).

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For structural members of specified sections weighing less than 22.5 Kg./m

Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1.