Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-Finance | ₹1.5 L | L1 | Accepted-Finance Retained L1 and L2 |
| 2 | L2₹1.5 L+₹1,551.43 (1.03%)Accepted-Finance | ₹1.5 L+₹1,551.43 (1.03%) | L2 | Accepted-Finance Retained L1 and L2 |
Tender Value
₹2 L
EMD Value
₹5,000
Closing Date
31 Jul 2026, 5:00 pmClosed
Divisional Forest Officer,Vazhachal
Divisional Forest Office,Vazhachal Division, Chalakudy
Construction of Toilet for VIP Launch at the Entrance Gate of Athirappilly Waterfalls in Charpa Range during 2026-27
2026_FD_862210_1
28/26-27
Open Tender
Civil Works - Buildings
Percentage
60 days
Charpa range
Please refer Tender documents.
2 documents required · 2 mandatory
₹649
Yes
₹5,000
Yes
3 Aug 2026
23 Jul 2026
3 Aug 2026
23 Jul 2026
31 Jul 2026
23 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Earth work | |||||
| 1.01 | 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 0.45 | cum | 2,129.84 | ₹958.43 |
| 1.02 | 50.10.2 Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 150 | kg | 187.05 | ₹28,057.5 |
| 1.03 | 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 7 | sqm | 842.14 | ₹5,894.98 |
| 1.04 | 12.26.1 Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick cement fiber board as per IS: 14862 | 12 | sqm | 969.84 | ₹11,638.08 |
| 1.05 | OD63588/2026-2027 Providing and fixing in wall lining with 3 mm thick ACP sheet with necessary fixing arrangement and screws etc.complete as per the direction(Frame work shall be paid seperately) | 17 | sqm | 1,905.34 | ₹32,390.78 |
| 1.06 | OD66438/2026-2027 Providing and fixing in wall lining with 12 mm thk WPL Luver sheet with necessary fixing arrangements such as screws and adhesives etc. complete as per the directions. | 3 | sqm | 1,994.78 | ₹5,984.34 |
| 1.07 | 21.5 Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 3 | kg | 845.94 | ₹2,537.82 |
| 1.08 | 50.18.7.2.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall | 12 | metre | 273.26 | ₹3,279.12 |
| 1.09 | 50.18.7.3.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | 20 | metre | 297.31 | ₹5,946.2 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.17 MB
N28.pdf
Tender Documents • 0.16 MB
S28.pdf
Tender Documents • 0.14 MB
PA.pdf
Other Document • 0.25 MB
BOQ_1458235.xls
BOQ • 0.26 MB
PR.pdf
Other Document • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .