Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
1 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
SHRI SAURABH, IDSE, CWE
HQ CWE TENGA PIN 900194 C/o 99 APO
PROVN OF 01 X 100 KVA TRANSFORMER FOR ELECTRIC POWER SUPPLY OF TECH BFG HALL COMPLEX AND 100 KVA TRANSFORMER FOR BSS (OPERATIONALLY CERTAIN SENSITIVE EQUIPMENT) OF CERTAIN UNIT AT MISSAMARI MIL STN.
2026_MES_798226_1
8668/E8
Open Tender
Civil Works
Item Rate
180 days
GE Missamari
D b(ii)
8 documents required · 8 mandatory
₹500
Yes
GE MISSAMARI
₹80,000
Yes
11 Nov 2026
11 Nov 2026
8 Dec 2026
11 Nov 2026
1 Dec 2026
25 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, install, test and commission step down transformer, outdoor type, plinth mounted HT 11 KV, 3 phase 433 volts, 4 wire, 50 Hz, delta/star connected, vector group DYN -11 double copper wound, ONAN, manual type off load tap changing facility on HT side to vary secondary voltage from minus 7.5% to plus 7.5% in steps of 2.5 %, continuous rating of capacity 100 KVA and of Level - 3 energy efficiency incl as per latest amendment of IS-1180 Part-1 2014 bushing on HT end cable box on LT side. The transformer shall be complete with all standard fittings and accessories, gauges, first fill of transformer oil, etc, and conforming to IS 1180 Part-1:2014 duly mounted on plinth and complete all as specified and as directed.
(a) Oil conservator with filling hole, cap and drain plug
(b) Silica gel breather with oil seal and first fills of dehydrating agent
(c) Adequate Nos of thermometer pockets incl one No for accomodating bulb type thermometer
(d) Drain cum bottom filter valve
(e) Top filter valve
(f) Prisomatic oil level gauge
(g) Inspection cover
(h) Cover fitting lugs
(j) Jacking and fitting lugs
(k) Separate neutral bushing brought out for earthing on LV side
(l) Earthing terminal
Note :- Construction of platform for must be suitable to the actual size of the Transformer and to be executed after approval of Engr-in- Charge. Cost of Platform deemed to be included in the Quoted rates. | 2 | Each | 100 | ₹200 |
| 2 | Supply laying & testing cable XLPE insulated,earthed, screened, PVC bedded,galvanised steel strip or wire armoured,electric power cables (heavyduty) with aluminium conductor, 6.35/11KV volts, grade cross sectional area 95 sq. mm 3 core conforming to IS 7098 complete all as specified and as directed. | 300 | RM | 100 | ₹30,000 |
| 3 | Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 sq mm complete all as specified and as directed. | 8 | Each | 100 | ₹800 |
| 4 | Supply & Fix Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-55 (11 metres long) and applying two coats of aluminum paint over a coat of red oxide primer,the embeded portion shall be applied with two coats bituminous paint complete all as specified and as directed. | 4 | Each | 100 | ₹400 |
| 5 | M&L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint as complete all as specified and as directed. | 4 | Qtl | 100 | ₹400 |
| 6 | M&L for Anti-climbing device; spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and as directed. | 0.35 | Qtl | 100 | ₹35 |
| 7 | M&L for Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts ofapproved size, for HT11000V, of size (25cmx20cm) complete all as specified and as directed. | 12 | Each | 100 | ₹1,200 |
| 8 | Supply and fix lightning arrestor expulsion type complete with all fittings transimission class discharge capacity 65kA suitable for 11000V complete all as specified and as directed. | 2 | Each (Set of Three) | 100 | ₹200 |
| 9 | Supply and install HT 11 KV outdoor type gang operated air-break switch , mechanically operated mounted on insulater and steel frame ,with operating mechanism worked from ground level suitable for horizontal or vertical mounting including drop out fuse having 12 insulators of rating upto 200 Amps complete all as specified and as directed . | 2 | Each | 100 | ₹200 |
| 10 | M & L for earthing complete with copper Earth Plate Electrode (600mm x 600mm x3.15mm), thick buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below Normal Ground Level, connected to Copper earth strip (20x3 mm) drawn through and including Galvanised Iron protection Pipe 40 mm bore (dia) Light grade up to height of the transformer foundation where transformer is situated by means of Bolts, Nuts, Check Nuts and Washers etc Earth plate surrounded by a packed thickness of charcoal or coke dust mixed with common salt in alternate layers of not exc 150 mm thick PCC Pit in cement concrete (1:3:6) (20 mm graded aggregrate ), Precast RCC (1:2:4) (20 mm graded aggregrate ) cover slab (350 x350 x 50 mm) thick reinforced with and including 8 mm dia TMT Bars @ 10 cm Centre to Centre both ways GI Wire Mesh , Funnel, with GI Watering Pipe 20 mm bore dia Medium grade necessary excavation in soft loose soil returning filling in and removal of surplus soil upto a distance of 50 metre and all as shown in Electrical Plate No. 3 of MES schedule Part- I and testing on completion complete all as specified and as directed. | 4 | Each | 100 | ₹400 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
BOQ_895465.xls
BOQ • 0.38 MB
Tenderdocuments8668PS.pdf
Tender Documents • 0.61 MB
Tenderdocuments8668.pdf
Tender Documents • 1.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .