Improvement of Modern Toilet in DRM office Kota

A-DSR 2023 ITEMS

Item Breakup - A-DSR 2023 ITEMS

pillar tap 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with Each 40 349.15 13966 flexible tube upto 1 metre long with S.S. 50 triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. KOTA DIVISION-ENGG/WEST CENTRAL RLY 17.22A Providing and fixing CP Brass 32mm size Bottle Each 50 1034.8 51740 51 Trap of approved quality & make and as per the direction of Engineer-in-charge. Providing and fixing P.V.C. waste pipe for sink or 17.28 wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 52 17.28.1.1 32 mm dia Each 13 103.9 1350.7 53 17.28.1.2 40 mm dia Each 14 116.7 1633.8 17.29 Providing and fixing 100 mm sand cast Iron Each 50 53.25 2662.5 54 grating for gully trap. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size 17.32 with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 55 17.32.3 Oval shape 450x350 mm (outer dimensions) Each 2 1377.1 2754.2 56 17.32.4 Rectangular shape 1500x450 mm Each 30 2093 62790 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement 17.37 concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 57 17.37.1 For 100 mm dia pipe Each 69 362.85 25036.65 17.78 Providing and fixing white vitreous china Each 40 14999.15 599966 extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern 58 with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 17.80 Providing and fixing white vitreous china battery Each 10 7979.2 79792 based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml 59 consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes 18.8 jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 60 18.8.2 20 mm nominal dia Pipes Metre 230 537.6 123648 61 18.8.3 25 mm nominal dia Pipes Metre 345 627.25 216401.25 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making 18.10 good the walls etc. ( Internal work - Exposed on wall ) 62 18.10.1 15 mm dia nominal bore Metre 57.5 366.4 21068 63 18.10.3 25 mm dia nominal bore Metre 57.5 551.7 31722.75 64 18.10.6 50 mm dia nominal bore Metre 57.5 1048.35 60280.13 18.15S BRASS FITTINGS KOTA DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 65 18.17.1 25 mm nominal bore Each 4 622.4 2489.6 18.31S C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES 18.48 Providing and placing on terrace (at all floor Per 1150 11 12650 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 66 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 67 18.49.1 15 mm nominal bore Each 28 506.8 14190.4 Providing and fixing C.P. brass long body bib cock 18.51 of approved quality conforming to IS standards and weighing not less than 690 gms. 68 18.51.1 15 mm nominal bore Each 12 798.95 9587.4 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 69 18.52.1 15 mm nominal bore Each 9 670.45 6034.05 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 70 18.53.1 15mm nominal bore Each 21 574.3 12060.3 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.79 Making hole up to 20x20 cm and embedding Metre 19 209.2 3974.8 pipes up to 150 mm diameter in masonry and 71 filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Providing & fixing chrome plated brass battery 18.84 based infrared sensor operated pillar cock, having foam flow technology. 72 18.84.1 15 mm nominal bore Each 18 8803.7 158466.6 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum thickness of Kg 170 530.9 90253 73 powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever 21.1.2 required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) KOTA DIVISION-ENGG/WEST CENTRAL RLY 21.1.2.2 Powder coated aluminium (minimum thickness of Kg 230 634.45 145923.5 74 powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness (weight Sqm 6 1505.25 9031.5 75 not less than 12.50 kg/sqm) 21.5 Providing and fixing powder coated aluminium Kg 170 817.15 138915.5 work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall 76 with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). 21.6 Providing and fixing 6 mm dia. G.I. level adjusting Each 170 82.45 14016.5 hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. 77 flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer- in-charge. Total 6817807.98

Item Breakup - B-NS ITEMS