GE/863/EWS-T-70/2019-20

Amount

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketcth fitting & regulator etc including making good to the distrurbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable submain wiring alongwith batten /PVC conduits etc and making good disturbed surfaces of walls/floors and match the existing surface all as directed at site. complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable main switches, DBs / changeover switch alongwith Teak wood boards etc and making good the disturbed surfaces of wall / floors to match the existing surface complete all as specified and directed by Engineer-in-Charge.

Taking down carefully old MCBs/ Isolators any type by unscrewing from board complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring using approved colour coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm FRLSH PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling terminal into PVC gang box for fixing switches sockets etc. complete all as specified and directed by Engineer-in-Charge. Make Havells or equivalent to approved Makes as per Appx 'B' in Tender Documents.

One light point controlled by one switch

One fan point controlled by one switch

One bell point controlled by one switch

All as per Srl item No 5 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. Make Havells or equivalent to approved Makes as per Appx 'B' in Tender Documents.

All as per Srl item No 5 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. Make Havells or equivalent to approved Makes as per Appx 'B' in Tender Documents.

All as per item No 5 hereinbefore but for socket outlet 3 pin 15 Amps on independent board with cable size of 4 sqmm and earth continuity conductor cable of size 2.5 sqmm. complete all as specified and directed by Engineer-in-Charge. Make Havells or equivalent to approved Makes as per Appx 'B' in Tender Documents.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make: Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. Make: Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make: Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Supply and fixing of socket outlet 6 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. Make: Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Supply and fix electronic fan step regulator flush type 120W. complete all as specified and directed by Engineer-in-Charge. Make: Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

S&F Bell push flush type 5/6 Amps complete including dismantling old one.complete all as specified and directed by Engineer-in-Charge. Make: Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

S&F Bell ding dong inreplacement AC 230 volt single pole, incl dismantling old one. complete all as specified and directed by Engineer-in-Charge. Make: Anchor Ding Dong bell or equivalent approved Makes as per Appx 'B' in Tender Documents.

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make: Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

M&L for lamp holder, PVC/ Polycarbonate type with back plate suitable fo batten fittings. complete all as specified and directed by Engineer-in-Charge. Make: Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Supply and fixing LED lAMP 9 W system 850 lumen (NOM) 600 with all accessories all as specified and directed by Engg-in-Charge. Make: Havells cat part No- LHLDEUEEMC8R009 or equivalent approved Makes as per Appx 'B' in Tender Documents.

S&F LED integrated batten tube light fittings 20W complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 including taking down old existing of any type or capacity and removing to store complete all as specfied and directed. Make C&S Cat Part No:LTTB4F20WLED/W or equivalent approved Makes as per Appx 'B' in Tender Documents.

S&F decorative compact enegery efficent Mirror light fitting 1x10 watt LED 1 feet length all as specified and directed by Engr-in-Charge. Make : Bajaj cat part No :BCLSB 10 NW equivalent approved Makes as per Appx 'B' in Tender Documents.

S & F compact Bulk head luminaire 1x10 watt LED light fitting complete set incl wire surface mounted with oval diffuser comprising of high brightness LED's formality connection specified Make : Make : Havells Cat part No RUGBYNEONFT10WLED860SSYMTOC or equivalent approved Makes as per Appx 'B' in Tender Documents.

Supply and fixing of sheet metal enclosure single door for DBs double pole and neutral for 8 way 240 volt with 200 Amp rated bus bar , earth bar & neutral bar & doorearthing complete all as specified and direct by Engineer-in-Charge . Approved Makes as per Appx 'B' in Tender Documents.

All as per item No.22 here-in-before but for 4 way. Approved Makes as per Appx 'B' in Tender Documents.

S&F SPN 40 Amp,230 volts. With rupturing capacity 10 KA. complete all as specified and direct by Engineer-in-ChargeApproved Makes as per Appx 'B' in Tender Documents.

S&F MCB SP 6 Amp to 32 Amp, 10 KA. complete all as specified and direct by Engineer-in-ChargeApproved Makes as per Appx 'B' in Tender Documents.

M&L for submain wiring with FRLSH insulated single core multistranded copper conductor cable 1100 Volts grade 6 Sqmm 2 runs and one run 4 sqmm as earth wire all drawn through & incl surface PVC conduit of suitable size medium grade all as directed by Engr-in-Charge. Approved Makes as per Appx 'B' in Tender Documents.

M&L for submain wiring with FRLSH insulated single core multistranded copper conductor cable 1100 Volts grade 6 Sqmm 2 runs and one run 4 sqmm as earth wire all drawn through & incl surface PVC casing & caping of suitable size medium grade complete all as specified and direct by Engineer-in-Charge. approved Makes as per Appx 'B' in Tender Documents.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deeep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel including PCC pit in PCC 1:2:4 type B-1 pre cast RCC cover slab using renforcement with weighting not less than 1.87 kg/cm2 with suitable handle made of 12mm round bar including necessary excavation and earth wire in any type of soil 20mm dia med grade galavanised steel tubing for watering with one end fixed to cast irn funnel and wire mesh 15mm bore light grade galvnised steel tubing up to 5m length for drawing earth lead wire protection , common salt charcoal etc. all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing on completions.

S&F in replacement of thermostat suitable for 25 ltrs capacity Geyser complete all as specified and direct by Engineer-in-Charge. Make : Recold/ Bajaj/ DassPass

S&F in replacement of thermostat suitable for 50 ltrs capacity Geyser.complete all as specified and direct by Engineer-in-Charge. Make : Recold / Bajaj/DassPass

S&F in replacement of heating element triganluar type1500 Watt suitable for 25/50 ltrs capacity Geyser. complete all as specified and direct by Engineer-in-Charge. Make :Recold/Bajaj/DassPass

S&F in replacement of heating element triganlur 2000 Watt suitable for 25/50 ltrs capacity Geyser.complete all as specified and direct by Engineer-in-Charge. Make :Recold/Bajaj/DassPass

S&F in replacement of multifunction safety device (pressure release valve) suitable for 25 /50ltrs capacity Geyser. complete all as specified and direct by Engineer-in-Charge. Make :Recold/Bajaj/DassPass

S&F in replacement of Hot and cold water pipe PVC connection heavy duty 600mm long for storage type water heater 25/50 Ltr capacity incl rubber washer (Set of 02). Sample of material shall be approved prior to fixing.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete all as specified and direct by Engineer-in-Charge. approved Makes as per Appx 'B' in Tender Documents.

S&F Rectangular LED flood light fitting 150 Watt with innovative thermal management and available in multiple coptics and equipped with IP66 protection Make- CG cat part No-LFLN-150-CDL/60 or equivalent of approved Makes as per Appx 'B' in Tender Documents.

S&F Recess mounting fitting 2x2x Panel 36 Watt Aura -I pairs super bright LED's with highly efficient light smoothing optics to deliver superior illumination and energy savings fittings Make- CG cat part No- LCPL-36-CDL(2x2) or equivalent of approved Makes as per Appx 'B' in Tender Documents.

Supply only the following item :-

Piano type switch 5 Amp Make- Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Socket outlet 5 Amp 5 pin 2 in one. Make- Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Piano type swicth 15 Amp Make- Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Socket outlet 5/15 Amp 6 pin multi type. Make- Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

Lamp Holder Angle type Make- Anchor polycorbonate or equivalent approved Makes as per Appx 'B' in Tender Documents.

Lamp Holder batten type Make- Anchor Penta model or equivalent approved Makes as per Appx 'B' in Tender Documents.

PVC Gang box 4x4 4 Module Make- Anchor

PVC gang box 4x6 6 Module Make- Anchor

Plug Top 15 Amp Make- Anchor Penta Polycorbonate, Havells Reo, Great white Polycorbonate

Plug Top 5 Amp Make- Anchor Penta Polycorbonate, Havells Reo, Great white Polycorbonate

PVC Insulation tape 25 Mtr length 20mm wide. Make: Anchor, Steel Grip

PVC 15/16 Amp Gang Box Multipurpose Make- Anchor

Supplying, laying, jointing and testing cable XLPE insulated IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminium conductor for working voltage upto and including 1100 volts, cross sectional area of cable 10 sq mm 2.0 core laid in trenches/ fixed on pole/wall/passed through pipe complete all as specified and directed by Engr-in-Charge. Approved Makes given in Appendix 'B' of Tender Document.

All as per item No 3 above but size 16 Sqmm 2 Core

All as per item No 3 above but size 16 Sqmm 4 Core

All as per item No 3 above but size 25 Sqmm 4 Core

All as per item No 3 above but size 35 Sqmm 3.5 Core

All as per item No 3 above but size 50 Sqmm 3.5 Core

All as per item No 3 above but size 70 Sqmm 3.5 Core

S&F 1100 volt grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm 2 core incl taking down old service connection and removing from the side complete all as specified and directed by Engineer -in-Charge. Approved Makes are given in Appendix 'B' of tender documents.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5m in depth in a hard/dense soil for laying underground cables /errection of steel tubular poles/ stay pit etc all as directed by Engir-in-Charge.

M&L for sand cushioning the UG cable screened unwashed river sand and punning for cushioning to cable Complete all as specified and directed by Engr-in-charge.

M&L for laying dry bricks old size with subclass 'B' made of burnt clay best quality locally available with permissible tolerance, laid down width equal length of bricks for protection of cable all as specified and directed.

Returning, filling in incl spreading,levelling watering and well ramming in layer n exc .25 cm each layer in approved soil Complete all as specified and directed by Engr-in-charge.

Removing excavated surplus material to a distance n.exc 50m and deposting where directed at a level n exc. 1.5 m above the starting point in any type of soil complete all as specified and directed by Engr-in-Charge.

M&L for staying in a truly vertical position till the foundation is set to earthwire of any size steel tubular swaged poles with ISI marked complete with cast iron base plate, finial taper plug, bolts, nuts & screws all as specified type 410SP -31 (9mtr long LT poles) and incl painting with one coat of red oxide and two caots of aluminium paint (inside and outside) and black bitumen paint on hidden surfacein foundation including drilling of holes for fixing 'D' iron clamps & hooks for contineous GI earth wire including dismentling old existing steel pole of any size or type and removing to store complete all as specified and directed by Engr-in-Charge (excavation and PCC work shall be measured and paid separately). Approved makes as per Appx 'B' in Tender Documents.

M&L for cross arms bracings, supports, clamps and back paltes fabricated from structural steel sections incl nut & bolts, washers welding, bending cold or hot drilling holes for bolts, washers in any shaper or size as indicated or directed incl one primer coat, one under coat & one finishing coat complete all as specified & directed.Sample of material shall be approved prior to fixing.

M&L for pin type, procelain vitreous, white, brown or green insulator incl one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut 100 mm height 65mm dia for 1100 volts grade complete all as specified and directed. Sample of material shall be approved prior to fixing.

S&F shackle type porecelain vitreous white brown or green insulator for working pressure 1100 volts of 90mm dia and 75mm height incl galvanised steel straps of 31x3 mm size insulator and 12 mm dia bolt, washer & nuts complete all as specified and directed.Sample of material shall be approved prior to fixing.

M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead by means of bolts , nuts check nuts and washers of galvanised iron or steel using GI stripe 32x6 mm as earthing lead as shown in electric plate No- 3 of SSR-Part-1 connected to earth test point all as specified or indicated including testing on completion and necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, pit, funnel, 20mm dia medium grade watering pipe, 40 mm dia GI light grade earth lead protection pipe , CI frame and cover, wire copper lugs etc mesh, charcoal and common salt in alternate layer complete all as specified and directed by Engineer-in-Charge. (GI strip of extra length of maon earthing lead beyond 7.5 Mtr will be measured and paid separately)

Net Contract Sum will be after deducting Sch of Credit of Rs 107273.00

A P ENTERPRISES

akshikconstruction

m/s jupiter builders

PRITPAL SINGH

Rajesh Agencies

Pankaj Traders

Vishal Builder