PROVIDING WATERPROOFING AND COLOURING TO SABHAGRUHA NEAR SWAMI SAMRATH MANDIR IN MAYUR NAGAR SUDARSHAN NAGAR WARD NO. 09 IN ZONE NO. 04

REMOVAL OF PLANTS / FICUS GROWN BY PULLING OUT ROOT SYSTEM EMBEDDED IN MASNORY, CUTTING STEM AND APPLICATION OF HIGH/GUR/LIME FORMULATION AS SPECIFIED BY THE ARCHITECT OR OTHER PATENTED CHEMICAL BLOCIDE TREATMENT SUCH AS BIOCIDE 'GLYCEL' (ISO PROPLAMINE SALT OF GLYPHOSATE) OR OTHER CHEMICAL AS SPECIFIED BY THE ENGINEER IN CHARGE ETC. COMPLETE.

WASHING AND CLEANING OF DECORATED WALL SURFACES WITH SOAP, SODA AND WATER ETC. COMPLETE.

PROVIDING AND APPLYING WATER PROOFING TREATMENT USING ACRYLIC POLYMER MODIFIED CEMENT BASED WATER PROOFING COATING WITH FIBRE GLASS MESH MIXING AT THE RATE OF POWDER TO LIQUID (2:1) BY WEIGHT COVERING 9 TO 10 SQM /KG WITH TWO COAT USING DR. FIXIT OR ALIKE OF CHEMICALS FOR MASONRY AND CONCRETE SURFACE BY BRUSH COVERING 7 YEARS GUARANTEE ON STAMP PAPERS ETC. COMPLETE.

PROVIDING FINE CEMENT FINISH 1.5 MM THICK OVER GREEN PLASTER SURFACE INCLUDING SCAFFOLDING CURING ETC. COMPLETE. AS DIRECTED BY ENGINEER IN CHARGE.

PROVIDING AND FIXING P.V.C. RAIN WATER PIPES OF 160MM OUTER DIAMETER AND HAVING WALL THICKNESS OF 2.2 TO 2.7 MM CONFIRMING TO 1.S. 13592-1992 INCLUDING PROPER RAINWATER RECEIVING RECESS WITH P.V.C. PLUG, BEND, NECESSARY FITTINGS, SUCH AS, OFFSETS, SHOES, INLUDING FIXING THE PIPE ON WALL USING APPROVED WOODEN CLEATS PROJECTING 25MM TO 40MM FROM FACE OF WALL A FIXING WITH CLIPS OF APPROVED QUALITY AND NUMBER, FILING THE JOINT USING RUBBER GASKET WITH SOLVENT CEMENT AND PROPERLY RESTING THE SHOE OF PIPES ON C.C. OR MASONRY BLOCKS, INCLUDING NECESSARY SCAFFOLDING AND MAINTENANCE FOR 3 YRS FOR ANY LEAKAGES OR DISLOCATIONS OF PIPES. ALL THE P.V.C. FITTINGS AND ADDITIONAL 2 PLECE SOCKET CLIPS SHALL BE GOT APPROVED FROM ENGINEER IN CHARGE ETC. COMPLETE. (THE CONTRACTOR SHALL GIVE 3 YRS GUARANTEE BOND FOR PAYMENT)

PROVIDING SAND FACED PLASTER EXTERNALLY IN CEMENT MORTAR USING APPROVED SCREENED SAND, IN ALL POSITIONS INCLUDING BASE COAT OF 15 MM THICK IN CEMENT MORTAR 1:4 USING WATERPROOFING COMPOUND AT 1 KG PER CEMENT BAG CURING THE SAME FOR NOT LESS THAN 2 DAYS AND KEEPING THE SURFACE OF THE BASE COAT ROUGH TO RECEIVE THE SAND FACED TREATMENT 6 TO 8 MM THICK IN CEMENT MORTAR 1:4 FINISHING THE SURFACE BY TAKING OUT GRAINS AND CURING FOR FOURTEEN DAYS SCAFFOLDING ETC.COMPLETE.

PROVIDING AND APPLYING TWO COATS OF EXTERIOR WEATHER SHIELD PAINT OF APPROVED MANUFACTURE AND OF APPROVED COLOUR TO THE PLASTERED SURFACES INCLUDING CLEANING, PREPARING THE PLASTER SURFACE, APPLYING PRIMER COAT, SCAFFOLDING IF NECESSARY, AND WATERING THE SURFACE FOR TWO DAYS ETC COMPLETE.

PROVIDING AND APPLYING INTERIOR WALL FINISH LUSTER OF ASIAN/BERGER / NEROLAC / DULUX PAINTS OR EQUIVALENT MAKE ON INTERNAL WALL SURFACE AS DETALLED BELOW SCRAPPING THE SURFACE WITH EMERY PAPER AND WIPE CLEAN. APPLYING ASIAN / BERGER/NEROLAC DUUEX PAINTS OR EQUIVALENT WALL PRIMER WITH BRUSH WITH MINERAL TURPENTINE WITH BRUSH 8 TO 10% AND OIL 15 TO 20% WITH ROLLER AND ALLOWING TO DRY FOR A PERIOD 6 TO 8 HOURS. APPLYING ASIAN /BERGER / NEROLAC / DULEX PAINTS OR EQUIVALENT ACRYLIC WALL PUTTY WITH APPROPRIATE PROPORTION OF WATER ALLOWING TO DRY FOR PERIOD 4 TO 6 HOURS. SCRAPPING WITH EMERY PAPER 180 AND WIPE CLEAN. APPLYING ASIAN/BERGER/NEROLAC / DULUX PAINTS OR EQUIVALENT WALL PRIMER WITH BRUSH WITH MINERAL TURPENTINE 8 TO 10% AND OIL 15 TO 20% WITH ROLLER SCRAPPING EMERY PAPER 320 AND WIPE CLEAN, APPLYING ASIAN/BERGER/NEROLAC / DULUX PAINTS OR EQUIVALENT INTERIOR WALL FINISH LUSTER 1ST COAT WITH BRUSH/RUBBER/SPRAY WITH MINERAL TURPENTINE 7 TO 9% AND OLL WITH ROLLER 19 TO 21% AFTER 8 HOURS OF ACTIVITY APPLYING 2ND COAT OF ASIAN / BERGER /NEROLAC / DULUX PAINTS OR EQUIVALENT INTERIOR WALL FINISH LUSTRE WITH MINERAL TURPENTINE 7 TO 9% WITH BRUSH AND OIL WITH ROLLER 19 TO 21% AFTER ALLOWING AS DIRECTED BY ENGINEER IN CHARGE.

PROVIDING AND APPLYING ONE COAT OF FLAT OLL PAINT OF APPROVED COLOUR TO THE OLD STRUCTURAL STEEL WORK AND IRON WORK PREVIOUSLY PAINTED IN BULLDING INCLUDING SCAFFOLDING, IF NECESSARY, CLEANING AND PREPARING SURFACE (EXCLUDING PRIMER COAT) ETC.