Revovation of Sub Divisional Officer Residence at Canal Colony Naraingarh

Amount

Dismentling of tile terracing in cement.

Removing door (wood and steel) to gether with chowkats by making recesses in wall when the wall is not to be dismentled.

Removing of windows (wood and steel) together with chowkhats by making recesses in wall when the wall is not to be dismentled.

Removing of cleresetory window(wooden & Steel) together with chowkats by making recesses in wall when the wall is not to be dismentled.

Dismentling of mud phaska in roof.

Dismentling of plain concrete 1:3:6.

Dismentling in brick work, tile masonary or tile lining and tile terracing

Damp proof course 75 mm thick of cement concrete `1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded .

Ist class brick work 1:4 laid in cement sand mortar in super structure above plinth

scrapping of cement plaster on walls and ceiling

1st class brick work laid in cement sand mortar 1:4 in foundation and plinth

10 mm thick cement plaster 1:3 on ceiling

12 mm thick cement plaster 1:3

Pressed steel frames ( chowkhats) consisiting of 2mm thick steel sheet of the specified including iron lugs ( hold fast) iron hinges, confirming to PWD specifications including bolts for fixing stops, lock notch, provision for receving tower bolts and finished with one coat of ready mixed paint red lead non- setting primer, of approved quality fixed in position including the cost of cement concrete 1:3:6 for lugs complete.

Pressed Steel Sheet frame (Chowkats) consisting of 2mm thick Steel Sheet of the special field section including iron lugs (hold Fasts) iron hinges confirming to PWD specification including bolts for fixing stops locknotch provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non setting primerof approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete.

Factory manufactured paneled door or glazed window, shutters of commercial hard wood such as hollock, champ, chirkassy and chaplash etc, (non coniferous timber other than teak confirming to I.S. specification No. 1003 kiln seasoned) with 100mm wide lock rail, 200mm wide bottom rail and 100mm wide other rails, with panels of 15mm thick tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc. complete fixed in position (excluding the cost of any fitting, other than specified above, but including labour for fixing the same in position) 30mm thick

Factory manufactured wire gauge door window, shutters of commercial hard wood such as hollock, champ, chirkassy and chaplash etc, (non coniferous timber other than teak confirming to I.S. specification No. 1003 kiln seasoned) with 100mm wide lock rail, 200mm wide bottom rail and wire gauge of 140 g or 120 g designation and including cost of iron hinges, screws, chocks/cleats, stops, nails etc. complete fixed in position (excluding the cost of any fitting, other than specified above, but including labour for fixing the same in position)

Providing and laying average 6 mm thick pop coating on walls , ceiling , beam and lintle etc. complete in all respects as approved by the Engineer-in-Charge

Providing & fixing false ceiling with grooves with 12 mm to 15 mm thick, 600mm x 600mm best quality material fibre tiles approved make fixed on M.S. steel rumours frame i/c cost of screws angles, cleats,rawels plugs, with trapping & painting etc. complete in all respect

Prepration of plastered or concrete surface for painting including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisiting of white lead, linseed oil, varnish and chalk mittti including finished surface to the require finish complete 2nd quality paint

Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting and stopping etc

painting two coats with ready mixed eterior paint in all shades on newly plastered or concrete surface of walls (inner side) first quanlity paint

Providing two coats of exterior acrylic emulsion paint first quality paint

Prepration of plywood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnishand chalk mitti including finishing the surface to requried finish complete 2nd qualit paint

Applying pink primer of aluminium priming coat on wood work including prepration of surface, knottting and stopping etc. first quality paint

Painting two coats excluding priming coat with syenthtic enamel paint in all shades on new wood work or metttalic surface, plastered, concrete surface to give an even shade.

Providing and fixing ceramic/ antiskid tiles of size 400mm x 400mm or above size approved make in flooring, laid in any patttern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed wuth white cement slurry mixed with pigment to match the shade of iles

Providing and fixing vetrified tiles in size 600mm x600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slury mixed with pigment to match the shade of tiles

Providing and fixing vetrified tiles in size 600mm x600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slury mixed with pigment to match the shade of tiles.

Providing and fixing 1st quality ceramic wall tiles confirming to I.S. 15622 (thickness to be specified by manufacture) of approved make in all colour, shedes burgundy, bottle green black of any as approved by over 12mm thick bed of cement coarse sand mortar 1:3 and jointed with white grey cement slury , i/c pointing in white cement mixed with pigment of matching shades complete (b) size of ceramic tiles glazed wall tiles 300mm x 450mm

Fe 500 EQR TMT Steel bars of RCC works where not included in the complete rate of RCC including bending, binding and cutting in position complete in all respect.

Cost of aluminium fittings complete for doors and windows, such as tower bolts, handels,etc. and serews for these fittings ( excluding sliding bolt). Single leaf shutter.

Providing and fixing sliding bolt with nuts and screws etc. complete. Aluminium Size 250mm x 16mm

Cement concrete 1:3:6 with 20 mm nominal size aggregate in foundation and plinth.

Precast terrazzo tiles of 20mm minimum thichness in cement as specified below with marble chips of size and colour as required laid on 20mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry, between joints and over the basde in floors, treads of steps and landing including rubbing and polishing. (a) in ordinary grey cement

Cement Concrete 1:2:4 gola 10 cm x 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified

Providing and fixing HDPE Water Storage Tanks of Sintex,Diplast,O.K Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes,providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers,flanges for connection to the Engineeri-in-Charge.

Tile terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud mortar for laying the tiles over a polythene film of 100 micron (0.1 mm) thickness with 25 mm thick layer offine sand , above and below the ploythene film laid on top of RCC slab including two coats of bitumen laid hot at 1.65 kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.

Marbel Stone 20mm to 25mm thickslab including matching grains of marble laid in any pattern as specified over a base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing ( using marble stone slab of size more than 0.38 sqm each)

Extra for nosing in marble stone for treads.

Factory manufactured solid flush door shutters, block board core as per I.S. No. 1659-1969 bounded with water proof type phenolformaldehyde synthetic resin, hot-pressed, confirming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stop, etc, ( excluding the cost of any fittings other than specified above, but including labour for fitting the same in position). Commercial veneering with vertical grains or cross bands and face veneer on both sides comercial facing with laminated core and lipped edge.

Wrought iron and mils steel ( using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type or railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in postion.

Providing and laying 60 mm thick ISI interlocking paver blocks of all shapes and colours in design mix M- 35 over a bed of 25 mm thick fine sand complete in all respect.

Supply and erection of PVC conduct pipe 25 mm dia

Supply and erection of PVC conduct pipe 20 mm dia

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm thick conduit pipe etc. of make , Havells for Fan Point Short

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm thick conduit pipe etc. of make , Havells for Fan Point Medium

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm thick conduit pipe etc. of make , Havells for Fan Point Long

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe etc. of make Havells Light Point (Short)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe etc. of make Havells Light Point (medium)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe etc. of make Havells Light Point (long)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe 3-pin 5amp plug point including earthing the 3rd pin etc. of make havells (Short)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe 3-pin 5amp plug point including earthing the 3rd pin etc. of make havells (medium)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe 3-pin 5amp plug point including earthing the 3rd pin etc. of make havells (long)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe etc. of make Havells Call bell point (Long)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe etc. of make Havells bed light point (short)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe etc. of make Havells bed light point (Medium)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe etc. of make Havells bed light point (long)

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe rose etc. of make Havells 3 pin 15 Amp. Plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. short

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe rose etc. of make Havells 3 pin 15 Amp. Plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. Medium HSR 31.36 (VIII) (b) @ Rs. 667.00 +10% = 733.70 Each.

Wiring with 1.5 sqmm PVC insulated copper conductor cable in 1.6mm conduit pipe rose etc. of make Havells 3 pin 15 Amp. Plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. long

Providing and fixing GI cocealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1& 2 modules

Providing and fixing GI cocealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 modules

Providing and fixing GI cocealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 4 modules

Providing and fixing GI cocealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 modules

Providing and fixing GI cocealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 8 modules

Providing and fixing GI cocealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 12 modules

Providind and fixing modular type accessoriesm of approved make such as havells fine in existing box including fixing and making necessary connections, complete in all respect (havells, fine) 10 amp 1 way switch

10 amp 2 way switch

20 amp switch

10 amp socket

16 amp socket

bell push

fan regulator

call bell Ding dong (monitca)

blinking plate

HSR 31.12 (a) main switches ( L&T) supply and erection of metal clad switches/B.D.Bs with rag bolts on wall or on existing angle iron oards/pedestal i/c bonding to earth and necessary connection:-double pole switch 16 amp 240volts

double pole switch 32 amp 240volts

Earething with G.I. earth pipe 4.5 m long and 40mm dia with masonary enclosers on the top etc.

Extra for using salt and char coal/coke for pipe earth electrode as required

Providing and fixing in position best indian make (ordinary) lavatory suites consisting of lavatory in vitreous china ware size as given below (to the approval of Engineer-In-Charge) including china plug for tap hole wherever necessary. R.S. Or CI (for building into wall including painting. 32 mm CP brass waste with CP brass chain and rubber plug. 15 mm CP brass screw down pillar type with jam nuts or couplings best design (as approved by Engineer-In-Charge) All fittings best indian make and all brass work cromium plated and complete in all respect including cutting and making good the walls, floors and painting of fittings etc.

Providing and fixing 15 mm CP brass laboratory cock swan neck of best quality to the approval of Engineer-In-Charge (jaguar) to way

Providing and fixing in position best indian make shower with 15 or 20 I/D inlet CP brass rose shower 150 mm dia(jaguar)

Providing and fixing in position 15 mm I/D CP brass bib cocks of best quality (as required by Engineer-In-Charge (jaguar))

Providing and fixing in position 15 mm I/D CP brass bib cocks of best quality (as required by Engineer-In-Charge (jaguar)) bib cock long body

Providing and fixing in position CP brass stock cock (as approved by Engineer-In-charge (jaguar)) concealed stock cock with flange

Providing and fixing Jet (H) with connection pipe.

Providing and fixing PVC waste pipe (H).

Providing and fixing in position best indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 no. CP brass screws and washers over rubber washers and rawl plugs embedded in the wall or chromium plated brass clamps with CP brass screws( As required by engineer-in-charge) complete including cutting and making good the walls etc.

Providing and fixing best indian make towel rails fixed in with rawl plugs embedded in walls with CP brass Screws, complete in all respect including cutting and making good the walls etc.25mm dia CP brass adjustable 750mm long

Providing and fixing PVC Rain water pipe 6Kg pressure of ISI mark in cement mortar during masonry work 100 MM dia PVC pipe 6 Kg Pressure

Providing PVC Rain Water Pipe 3"dia (NS).

Providing and fixing PVC bend ISI mark 100 mm dia

ProvidingTee 4" dia Diplast (NS).

Providing Elbow 3" dia Diplast (NS).

proving Tee 3" dia Diplast (NS).

Providing P trap 4" dia (NS).

Providing Floor trap 3" dia Diplast PVC (NS).

Providing Socket 3" dia Diplast PVC (NS).

Proving Socket 4" dia Diplast PVC (NS).

Providing & fixing in position best indian make (to the approval of Engineer-In-charge ) (era, hindware, parryware) European type water closet suite, syphonic type consisting of (i)Vitreous chineware syphonic suite with 15 ltr capacity matching chineware cistern and all internal brass fitting complete with "p" or "s" trap with or without vent (as approved by Engineer- in- chargre)(ii)one piece seat and lid in hollow black or white plastic fitted with chromium plated hinges and rubberbuffers, (to the approval of the engineer in charge) (jaguar) complete in all respects including cutting and making good the wall and floors (a) single trap syphonic W.C. Suite. (ii) single colour

Earth work exevation in ordinary soil duly dressed with all leads and lifts including braking of clods and all other allowances with a lead of 8 Km

Cerdit of dismentled old brick Work

Credit of Dismentled Tile Masonary

Credit of dismentled steel

Credit for Wood Work

THE NEW TAJEWALA CO-OP L/C SOCIETY LTD