GENERAL-Modernization of Canals under Walayar Project-PhaseI-Walayar Main Canal, No.3 Distributary Canal, Pudussery Main branch Canal, Kalleppully Branch canal including rectification of sluices,repairs of Canal shutters providing new Sluice shutter

Amount

1 Supply, Fabrication and Erection of Canal Shutters

OD15962/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charge

OD15963/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD15964/2022-2023:Supply of MS round bar including cost of conveyance charges

85.103:Supply of MS checquered plates including cost of conveyance charges

OD15965/2022-2023:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

OD15966/2022-2023:Fabrication and errection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD15967/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD15968/2022-2023:Dismantling of the shutters (where there is road access to the point ).from the grooves and stacking including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

OD15970/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , lader etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD15971/2022-2023:PROVIDING BASE & NUT arrangement for hoisting the shutter including cost of all materials labour etc complete.

OD15972/2022-2023:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

OD15973/2022-2023:Providing EN-8 screw rod 7.5 tonne capacity 4.00 M lift screw hoist having one number of EN-8 screw shaft having a lifting speed of around 5.00cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance(63mm screw rod)

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD15974/2022-2023:Re-Conditioning of existing EN-8 Screw rod including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete.

OD15975/2022-2023:OVERHAULING AND RESETTING OF BASE AND NUT assembly including cost of all materials, labour charges,hire charges, energy charges, conveyance, all leads and lifts (Canal Shutter)

OD15976/2022-2023:OVERHAULING OF EXISTING WORM AND PINION including cost of all materials, labour, hire charges, energy charges, conveyance and all leads and lifts for canal shutter

OD15977/2022-2023:Cost of supplying and fixing of Screw rod LOCKING ARRANGEMENT including cost of materials, labour and conveyance complete.

2 Associated Civil Works

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.2.1:15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)

ASHIFUL HAK.C

V M Asharaf

P.Damodaran, G.R.Industries

Bidder Name

V M Asharaf

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries

ASHIFUL HAK.C