Upgradation of electrical installation works at various areas under under EE(E)LR,MTNL, New Delhi.

Amount

Supplying and fixing of 20-22 watt LED batten fitting (4 feet), 1850-2000 lumens complete with integral electronic driver operated on 230 V 50 Hz AC supply including dismantling the old one,providing pvc round block (2 Nos each) for surface mounting arrangement, connections etc complete as required. (Make: Philips/ Havells/ Wipro).

Supplying and fixing of 450 mm (18") heavy duty exhaust fan, single phase, 900 RPM, 2295 CFM along with louvers/ shutters complete with frame including dismantling the old one, making suitable necessary modification/arrangement (i/c petty items) for fixing the new items and making connections etc complete as reqd as per the site location given by the Engineer-in-Charge. (Make: Almonard)

Supply, installation, testing, commissioning of indoor cubical type floor mounting low tension distribution panel suitable for 415 volts 3 phase 4 wire 50 Hz, AC supply system fabricated out of 2mm thick CRCA sheet, compartmentalized with hinged lockable front openeable doors,dust & vermin proof,powder coated of approved shade, separate housing for each MCCB, 300 Amp 4 strip pvc colour coded aluminum busbar having fixing arrangement,cable alley, interconnection with suitable size of copper conductor wire / solid copper conductor with ferrule, lugs, crimping the lugs, base channel, aluminium earth bus-bar of size 25 X 5mm etc complete as required as per site requirement and terms ,conditions attached. The panel shall incorporate of following and as per specification. INCOMMER:- i) 250 Amp, 36 KA FPMCCB with spreader (Make: L&T, Model: DN2-250D), three phase digital ammeter (0-300 Amp) and voltmeter (0-500V) ,CT's for sensing (300/5 Amps) and indication lamps for Phase RYB. - 2 Set. ii) Electrical and mechanical Inter lock (Make: L&T) complete to prevent simultaneously closing of both incomers -1 Set. OUTGOING:- i) 100 Amp, 36 KA FPMCCB with spreader (Make: L&T, Model: DN0-100D) , three phase digital ammeter and voltmeter ,CT's for sensing and indication lamps for Phase RYB - 4 Nos. [Note: a) The panel must be provided with supporting frame made of 50x50x6mm MS angle duly painted having four nos legs of height not less than 350 mm from floor level. b) The above job also includes supplying and making end termination with brass compression gland and aluminum lugs for the existing incoming and outgoing cables including making connection in the low tension panel. c) The above job also includes shifting of the low tension panel from ground floor to the terrace of the building with the help of heavy labour complete as per instructions of Engineer-in-charge. e) Digital Measuring Instrument Make: L&T/Risabh. f) Current and Potential Transformer Make: Risabh/Kappa/AE. g) Indication Lamp Make: Siemens/ Vaishno/Risabh.

Dismentling of old existing low tension distribution panel including disconnection of all incoming and outgoing cables connection and dismantling of unusable cables of all sizes and all unsuable electrical material including shifting the low tension panel along with unusable electrical material with the help of heavy labour from building terrace to store within the building etc complete as per the instructions of Engineer-in-charge.

Providing and fixing plain 1 sqmm size twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door including providing clip for fixing etc complete as required. (Make: Havells/ Polycab/ KEI/ Finolex)

KASHYAP ELECTRICALS