ADDN ALTN AND IMPROVEMENT TO CERTAIN BUILDINGS AT SALAWAS AT AF STN JODHPUR UNDER GE AF JODHPUR

Amount

Excavation in post holes each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with around earth in layers not exceeding 25 cm thick, watering and removing surplus spoil to a distance not exceeding 50 m and making good surface all as specified and as directed.

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified and as directed.

M&L for surface dressing n exc 15 cm deep in any type of soil all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in soft / loose soil etc complete all as specified and directed.

Removing excavated materials exceeding 1.5 Km and n exc 5 Km ,depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed.

M&L broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L 100 mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified & directed by Engineer-in- charge.

M&L for sand filling under floors incl watering & consolidation 25 mm thick for paver blocks complete all as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigments all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed.

M&L for providing precast of concrete type B1 1:2:4 (using 20 mm aggregate) for raised kerb stone at both side of interlock paver block complete all as specified and as directed.

Dismantling chain link fencing of any description fixed to any type of fencing posts complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion Concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified and as directed.

S&F angles in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F MS flat iron for securing the chain link fencing including necessary drilling for holes, cutting, punching, bending etc. conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F 10 mm dia round bars in available lengths and fixing in position complete all as specified and as directed.

S&F 5 to 10 mm dia Mild steel bolts (machine made) with hexagonal or square head at one end and screwed the other with washers and one hexagonal or square nut exc 10 cm long complete all as specified and as directed.

Supply only chain link mild steel galvanised fencing, any type of size complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (Note :- Each line wire to be measured and paid.)

M&L for preparation of new steel surface of any description over 10cm width or girth and M&L for applying two coats of synthetic enamel paint (1st quality) over and including one coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

M&L for brushing neat cement slurry with 3kg of cement per Sqm complete all as specified and as directed.

M&L for min 40 mm thick cement concrete 1:2:4 type B0 (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and smooth without using extra cement complete all as specified.

M&L 10mm thick plastering in cm 1:3 on green concrete roof surfaces with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified.. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound ISI Marked.

Material & labour for preparing the surface of roof and applying two coats of Polyurethene (PU) acrylic based Water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge.

M&L for providing cement concrete 1:2:4 Type B0 using 12.5 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified.

Dismatling floor hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/above ground level) including floor finishes complete all as specified & directed by the Engineer-in-Charge.

Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for non skid ceramic tiles light coloured (square/rectangular) of size 400 X 400 mm and thickness 8 to 9 mm thick, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including and over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match & rendering 10 mm thick in CM(1:4) complete all as specified and as directed.

Material & labour for vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge.

Material & labour for vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge.

Material & labour for granite of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 20mm screed bed in cement mortar 1:4 complete all as specified & directed by the Engineer-in-Charge.

M&L for rounding/chamfering to edge of stone slab like granite, marble, kota stone etc to required shape & design including grinding & polishing to obtain required finished complete all as specified and directed.

M&L for venetian blinds, vertical type, 100 mm wide with polyster fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons / loops etc fixed cuttings and alteration if necessary whereever AC/ coolers exists including dismantling old unserviciale venetian blinds complete all as specified and as directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets complete all as specified and directed.

M&L for 4mm thick E board classic, fibre base cement boards, embosed texture, fixed to aluminium snap grid (size of grid 605mm x 605mm) in ceiling complete all as specified and directed by Engineer-in-charge. Make :- Everest / Armstrong / Gypsum India Ltd / Bison / Aerolite Note :- The aluminium snap grid frame work shall be measured & paid for separately.

S&F anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling including necessary notching the snap grid shall consist of anodized aluminium main & cross Tee of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/RM and 23.5mm x 26.4mm x1.40mm weighing 0.191Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminium angle bracket of size 15mm x 15mm x 1.5mm weighing 0.12Kg /RM fixed with suitable MS bolts, nuts and washer. The snap grid (main /cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size 35mm x 25mm x 2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement duly suspended with 3mm dia GI wire length as required @ 600mm C/C with adjustable device including plugging in brick / concrete work with steel raw plugs including making good all the disturebed portion complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq.m each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. M but n exc 4 sq. m each and removing from site complete all as specified and directed.

S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.

M&L two coats of synthetic enamel on wood (ordinary tint) over one coat of pink primer over 10cm width or girth incl preparation of new surface complete all as specified and directed.

Supply and fixing flush shutters,30mm thick solid core construction, with block board core and plywood face panels, both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F standard grade WPC door frames of size 100x65mm for doors with single rebate including all necessary fixing lugs or clamps complete all as specified and directed by Engineer-in-charge.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly).

Supply & fixing factory made solid prelaminted PVC moulded flush Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design wood grain on both sides complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing stainless steel barrel tower bolt of size 150mm fixed in positions complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 125mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and as directed.

Supply & fixing stainless steel handles of size 125mm, complete all as specified and directed.

Supply & fixing 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed.

S&F Aluminium powder coated aluminium frame for doors, windows, ventilators, partion wall with one or more rebates including joining cleat for fixing etc complete all as specified and directed. (thickness of powder coating is 40 micron)

S&F aluminium powder coated door shutters of any colour (thickness of powder coating not less than 50 micron), aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified and directed.

S&F aluminium powder coated window and ventilator shutter side hung type without sashbar of any colour (thickness of powder coating not less than 50 micron), aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified.

Supply and fixing 7mm thick aluminium grill of make Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed by Engr-in-charge.

S&F for sheet glass 5 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square exc. 0.5 sqm in each pane complete all as specified and directed.

S&F 5 mm thick froasted glass panes and glazing with oil putty or fix in aluminium door / window complete all as specified and directed.

S&F Aluminium door closer hydraulically regulated, designation No 1, universal type suitable for door shutters upto 700 mm in width and of of wt not more than 35 kg complete all as specified and directed.

S&F brass mortice lock vertical type of size 100 mm complete all as specified and directed.

S&F 18 mm solid PVC ply of 1st quality of approved colour and fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge.

S&F 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge.

S&F 40 mm dia cupboard knobs fixed with nut svrew and washer of mild steel bright bolt complete all as specified and directed.

S&F Continuous (piano) hinges, stainless steel steel, bright finish or electro galvanised complete all as specified and directed.

S&F four lever brass Locks for cupboard/Glass doors, grade I, size 50mm complete all as specified and directed.

S&F magnetic catcher for wardrobe, cub-boards etc complete all as specified and directed.

Material & labour for squared rubble walling, Jodhpur type, brought to courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

Taking down cement or cement lime plaster work any description from brick or stone wall/ ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed by the Engineer-in-Charge.

Material & labour for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar 1:4, surface finished fair and even complete all specified and directed.

M&L for preparation of new plastered surface of wall and applying one coat of white cement base wall care putty 2 mm thick on walls finished even and smooth with sand paper and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls finished even and smooth with sand paper and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of ceilling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of oil bound distemper white or tinted over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surface of walls and applying two coat of exterior weather proof water base emulsion paint (white or tinted) over a coat of primer as per approved shade/coloured on walls in camouflage pattern complete all as specified and directed. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for complete removel of old existing tretment of wall surfaces and repair, stopping nails marks by applying white cement base putty in patches as required and applying two coat of exterior weather proof water base emulsion paint ( white or tinted) as per approved shade/coloured on walls in camouflage pattern complete all as specified and directed. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

Taking up or down steel tubing of 15 mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified & directed by the Engineer-in-Charge.

Taking up or down steel tubing of 20 mm bore pipe and connection including cleaning for re-fixing or removal to store complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 15 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 20 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia including dismantling/taking out of old water tank of having capacity of etc 500 Ltr but not exc 1000 Ltr & removing from site etc complete all as specified and as directed.

Supply and fixing in repairs 20 mm bore of ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) complete all as specified and directed.

Supply and fixing in repairs of PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair of vitreous china wash down water closet pan (pedestal pattern) white and trap including connection to drain flush pipe and anti syphonage pipe complete all as specified and directed.

Supply and fixing in repairs EWC seat cover PVC colour as approved by GE including all fitting arrangements complete all as specified and directed.

Supply and fixing in repairs PVC valveless syphonic action type flushing cistern low level 10ltrs capicty white, fixed with new brackets complete all as specifed and directed.

Supply and fixing in repairs brass chromium plated handspray (Health faucet) with flexible pipe length not less than 1.00 m (minimum) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified and directed.

Supply and fixing in repairs brass chromium plated paper holder for EWC complete all as specified and directed.

Supply and fixing in repairs of brass chromium plated angle stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified and directed.

Supply & fixing in repairs brass CP Bib taps, fancy type, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs 15 mm bore fancy type brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe complete all as specified.

Supply and fixing in repairs 15 mm bore fancy type brass chromium plated wall mixer with L-bend to overhead shower for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

Supply and fixing in repairs 15 mm bore fancy type overhead shower with arm swivel joint chromium plated screwed down of size 200 mm x 200 mm complete all as specified and directed.

Supply and fixing in repairs tublar towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified and directed by the Engineer-in-charge.

Supply and fixing in repairs sheet glass corner shelf 300mm assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing as approved by GE complete all as specified and directed.

Supply and fixing in repairs of brass chromium plates fancy type soap dish complete all as specified and directed.

Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with pedestal on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed.

Supply and fixing in repairs of fancy type pillar taps brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160mm complete all as specified and directed.

Supply and fixing in repairs PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 meter complete all as specified and directed.

Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as directed.

S&F 75 mm dia PVC (SWR) junction single,(Single T) equal or unequal all as directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as directed.

S&F 110 mm dia PVC (SWR) bend any radius complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light ,fan, socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for cutting chases, pinning in stone, concrete walls or slab walls, making good to facings where required and plastering/pointing in cement mortar 1:3 to surfaces and or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. cutting girth exceeding 20cm and making good complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, including and drawing in CONCEALED PVC conduit 20 mm dia medium grade ISI marked (having wall thickness of conduit not less than 2.00 mm) with all accessories such as bends, elbows reducers, pressed Non-metalic terminal boxes (or) steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size for one light/ fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 1.5 Sqmm copper conductor cable multistrand as earth wire, complete all as specified and directed.

All as per sel item No. 112 above but 3 pin socket outlet, 5 Amp on same board.

All as per sel item No. 112 above but 3 pin socket outlet, 5 Amp on independent board.

M&L for point wiring with 2.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, including and drawing in CONCEALED PVC conduit 20 mm dia medium grade ISI marked (having wall thickness of conduit not less than 2.00 mm) with all accessories such as bends, elbows reducers, pressed Non-metalic terminal boxes (or) steel/ MS terminal boxes factory made 1.6 mm thick duly painted in rectangular shape appropriate size for one light/ fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 2.5 Sqmm copper conductor cable multistranded as earth wire, complete all as specified.

S&F switch modular type 1 way, 6A, 1 module complete all as specified and directed.

S&F switch modular type 1 way, 16A, 1 module complete complete all as specified and directed.

S&F socket modular type 6A, 2/3 pin combined 2 module complete all as specified and directed.

S&F socket modular type 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing ceiling rose polycarbonate, isolated body 65 X 50 mm 2 to 3 terminal complete all as specified and directed.

M&L in repairs sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 4.0 Sqmm through and including non metallic PVC conduit including copper earth wire in green colour of size 4.0 Sqmm connection to DB with thimbling complete as specified and directed. (Note:- Two runs of sub main wire including earth wire and conduit shall be measured as one unit per RM.)

All as per Item no. 121 above but conductor size 2.5 Sq mm for Phase & Neutral and 2.5 Sq mm for earth wire.

Supply and fixing single pole neutral Sheet metal enclosure for 08 way DBs when SPN to be used single phase 240 volts, single door complete all as specified and as directed.

S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp complete all as specified and as directed.

S&F in repair 415 V 10 KA 'C' curve miniature circuit breaker (MCB) of double poles SPN 40 to 63 AMP and current carrying capacity in the DB complete with connection testing and commissioning all as specified and as directed.

Supply and fixing environmental friendly, new generation aesthetically designed, Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling. fixing of LEDs capacity 36W, 6500K (2'x2') of Havells model no.LHEBAEP7IW1W036 or other equivalent in CG/Philips/ Bajaj as approved by GE.

Supply and fixing in repiar LED Pride Essential Batten 25 W 6500 K Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack, connecting up with flexible copper conductor cable of suitable size from ceiling rose complete Make:- Havells Model no. LHEXAWP7IN1W025 or equivalent in Orient/ Philips/ Bajaj/ Wipro as approved by GE.

Supply and fixing metalic type Turbo force single phase exhaust fan of sweep size 300 mm (12 inch), 900 RPM, colour- 1P Grey, Four arm fan blades, Louvers, steel shutters on exhaust side single phase 230 Volts, 50 HZ complete all as specified and directed. Make:- Havells Model no. FHEHDSPDB129 or equivalent in Philips/ Bajaj/ Usha as approved by GE.

M&L for taking down ceiling fan with rod complete taking to workshop rewind the fan, replace capacitor, bushes, bearing, clean the body and apply two coat of synthetic enamel paint and refixing complete all as speicified and directed.

Supply, installation, testing & commissioning of hi wall split AC, indoor and outdoor unit including wall/ floor mounted stand as required at site, complete with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality (compressor & condenser coil shall be of copper) with 5 star rating and EER 3.2 of capacity 1.5 ton complete including necessary copper tubing and PVC drain pipe complete all as specified and directed. Note :- Quoted rate should be inclusive of wall/ floor mounted stand for outdoor unit.

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and laying in reapirs medium grade GI pipe of size 40 mm dia including all fittings laid in trenches/fixed to walls complete all as specified and directed.

S&F in repairs gun metal globe or gate valve including fittings 15 mm (1/2") dia with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M&L for cutting of existing steel tubing for alteration or additions of size 15 mm including necessary fittings required for refixing complete all as specified and directed.

M/S KAUTILYA GARG (BID ID -3289819)

chhaba construction (BID ID -3289959)

Om Trading Corporation (BID ID -3292147)

Ashwani Associates (BID ID -3288062)