Electrification of un-electrified PVTG households of 6 (six) Nos UE habitation within the jurisdiction of Electrical Division-Kailashahar under PM-JANMAN

Amount

Supply of the following:-

8-mt long S.T. pole [for L.T. Line]

M.S. Stay set [HT]

Stay set [ LT ]

Stay insulator (HT)

Stay insulator (LT)

GI Stay wire 7/4 mm (272X5)

M.S. Ch. 100 x 50 x 50 x 6 mm [2.8X18+0.8X12=60.00x9.56=573.60-Kg

M.S. Ch. 75 x 40 x 40 x 6 mm[2.8x96+0.3x130+1.2x130+1.7x71+2.2x71]= 740.70x7.14=5288.60-kg

M.S.Angle 65 x 65 x 6 mm. [2.8X48+1.6x130+2.5x71]=519.90x5.8=3015.42-kg

11 KV Polymeric Disc insulator [45 KN]

11 KV Polymeric Disc fittings.

11 KV Polymeric composite Pin insulator

11 KV G.I Pin.

ACSR WEASEL (30 Sq.mm) Conductor

GI wire (8 SWG)

LA - 9 KV 5 KA (set of 3 no)

11 KV GOS (3 phase Porcelin type)

11 KV DOF (3 phase Porceilin type)

25 - KVA Distribution Transformer,11/0.433-KV (Al) [BIS Level-II]

Cut Out [100 A]

Danger plate

PVC Cable 70-sqmm

Barbed wire

60-Kg Salt & 55-Kg Charcoal for earthing (1-Pit)

2.5-mt long 40-mm dia G.I.Pipe (TATA/JINDAL)

Wooden plank (Gamai/Karai)

Bi-Mettalic Lugs-70-sq.mm

PVC Pipe 1" size

L.T.AB Cable (3x70+1x50+1x65)-sq.mm

Suspension clamp Assembly with straps & buckle

Dead end clamp Assembly with straps & buckle

Service Anchor clamp

Distrbution Box 1-Phase ( 25 mm / 50 mm)

Cable End Cap (25-35 mm / 25-50 mm)

Cable Ties

Eye Hook

Pole clamp

Insulator piercing connector Main (16-95 sq.mm) & Tap 4-35(50) sq.mm

Stay clamp of MS Flat (50x6-mm)

Bracket clamp of MS Flat (50x6-mm)

Nuts & Bolts (assorted) size

2.5-Sq.mm PVC Cable (35x2x128)

Re-wireable Porcelin Cut out 16 Amp

10-SWG GI Wire for holding Service cable (3-Kg x 128)

Reel insulator (15x128)

8-SWG GI Wire for coil Earthing (4x128)

16-Amp ICDP Main Switch with ISI mark

Wooden plank (thickness 1")

9W LED Bulb

Angle holder ISI mark

4x4" Wooden / polycarbonate Board

5 Amp piano switch ISI mark

Single core 1.5-sq.mm Copper wire

Supply & Erection of Screw of assorted size

carrying of following from AD Nagar store to work site:- (a) S.T Pole 9.00mtr long(Upto 8 nos pole)

carrying of following from AD Nagar store to work site:- (b) S.T Pole 9.00mtr long (beyond 8 nos pole)

ERECTION OF THE FOLLOWING:- Erection of 9-mt length of S.T. Pole at any kind of soil upto a depth of 1/6 th of pole height including excavation of earth refilling the pit with soil upto the ground ;level ramming & making complete in all respect

Erection of 8-mt length of S.T. Pole at any kind of soil upto a depth of 1/6 th of pole height including excavation of earth refilling the pit with soil upto the ground ;level ramming & making complete in all respect

Erection of Stay set direct in earth complete with 19mm x 1800mm long stay rod,anchor plate of size 300x300x8-mm thimble,turn buckle,7/3.15 mm dia G.I.Stranded stay wire & stain sulator etc. with supply of M.S.Clamp, Nuts & bolts etc as reqd and making complete in all respect

Erection of M.S.Channel Cross-Arm 2.8-mtr long 100x50x50x6 mm (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 0.8 -mtr long 100x50x50x6 mm (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 2.8-mtr long 75x40x40x6 mm for GO,DO & LA (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm 2.8-mtr long 65x65x6 mm (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 0.3 mtr long 75x40x40x6 mm for S.P.Top bracket (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 1.2 mtr long 75x40x40x6 mm for S.P Bottom bracket (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm 1.6-mtr long 65x65x6 mm for S.P.Guard (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 1.7 mtr long 75x40x40x6 mm for D.P.Top bracket (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm 2.2 mtr long 75x40x40x6 mm for D.P Bottom bracket (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm 2.5-mtr long 65x65x6 mm for D.P.Guard (Excluding the cost of Back clamp, Nuts & Bolts)

Erection of 11 KV single Disc insulator set along with necessary fitting

Erection of 11 KV Pin insulator along with Pin

Erection of Danger plate on OH lines (11-KV/415Volts)

Laying & stringing of 1KM (Single conductor) ACSR 6/1/2.59 mm dia WEASEL including hoisting & binding etc complete as reqd.

Laying & stringing of 1KM (Single conductor) G.I.Wire 8-SWG including hoisting & binding etc complete as reqd.

Erection of 9 KV, 5 KA Single pole metal oxide gapless type LA including necessary connection complete as per technical specification

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification (Excluding the cost of back clamp, Nuts & bolts)

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification (Excluding the cost of back clamp, Nuts & bolts)

Laying of 8-SWG GI Wire at 300-mm below the ground level for earthing of Sub-station equipments from the earth electrode/ HT Pole/ LT Pole/ service main

Installation/positioning of 11/0.433 KV 3-Phase 25- KVA of distribution Transformer on pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing

Erection of 11 KV protective guarding by GI wire 8 SWG as per technical specification across road/river/Telecom line etc in horizontal formation complete

Supply & erection of substation fencing with erection of 6nos 2.50m long ( 65 x 65 x 6mm) Angle post and 4nos( 50 x 50 x 6mm)angle post with grouting of vol 0.045cum at the ratio of 1:2:4(1cement :2R. sand : 4 jhamabrick aggregate) per post. The fencing should be made 9 horizontal line of barbed wire and one gate with shutter (2 x 1.7)m i/c locking arrangement etc complete as per diection of the Engg. in charge.

Fabrication of X-arm by MS Angle/MS Channel as per specification

Earthing with G.I.Pipe 2.5 mtr long & 40 mm dia including excvation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, GI Wire, Nuts & bolts etc as required)

Barbed wire (anti-climbing device)

Positioning of cable drum, removing of cable from drum & laying,hoisting & drawing of AB Cable 3x70-95+1x16-25+1x50-95-sq.mm of 101 KV grade as per direction of E-I-C

Fitting-fixing of Service main 1/3-phase distribution Box 1.01-KV grade on PCC/ST Pole with help of pole brackets or steel straps & buckle as per direction of E-I-C

Erection & ditting-fixing of insulated suspension clamp including pole clamp, Eye hook for cable massenger of 1.1 KV grade on PCC/ST Pole with the help of pole brackets or steel straps & buckle as per direction of E-I-C

Erection & ditting-fixing of insulated Dead end / Anchor clamp including pole clamp, Eye hook for cable massenger of 1.1 KV grade on PCC/ST Pole with the help of pole brackets or steel straps & buckle as per direction of E-I-C

Erection & ditting-fixing of insulation of Piercing connector (IPC) of all sizes of 1.1 KV grade including connection from main cable to Distribution Box, Tee-off line as per direction of E-I-C

Providing Single Phase Service Connection with laying PVC cable from nearby Electrical pole to premises up to 35 mtr in length supported by G.I.Wire Reel insulator i/c fitting, fixing of Energy Meter as reqd.

Carriage of 11/0.433 KV 3 Phase 25 KVA by Mechnical Transport from the Sub-Divisional store yard to Work site including loading, unloading &as reqd. Upto lead range 25 KM

Carriage of 8/9-mtr long S.T. pole by Mechnical Transport from the Sub-Divisional store yard to Work site including loading, unloading &as reqd. Upto lead range 25 KM

Carriage of steel materials,ACSR,GI Wire,GOS & DOF LA etc by Mechnical Transport from the Sub-Divisional store yard to Work site including loading, unloading &as reqd. Upto lead range 25 KM

Grouting of 9-Mtr long S.T. Pole (1-Cement : 2-coarse river : 4-graded stone) = .273-cum/Pole

Sub-station Name plate in/c supply as directed by Engg-in-charge

Maintaining adequate clearence from overhead live conductors by Trimming of tree branches for way leaves

Straightening of 9-mt long PCC Pole

Re-adjustment of Stayset complete without dismentalling of turn buckle

Re-stringing of conductor (ACSR 6/1/2.59-mm) including binding,hoisting & jumpering etc as reqd

NIKHIL DAS