KCMC- General Fund - 2023-24

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Supplying and filling in foundation and basement with filling M.Sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed

Supply cutting Bending tying and fixing in position of MS (or) RTS grills for RCC work including cost of steel and binding wire etc.,

Supply and Delivery of M20 x 750mm Length "J" type foundation bolts (EN8 Grade) - 4 sets. With necessary nuts & Wahers including Template arrangements.

Providing and laying in position, standarised design mix M-20 Grade using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350Kg/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.70 cu.m.)940.50Kg of 20mm machine crushed stone jelly and with about (2.80 cu.m.)462.00Kg of 10-12mm machine crushed jelly and with about (4.25 cu.m.)701.25Kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor/roof slabs wherever neccessary without clambing extra, etc. complete complying with standard specification and as directed by the departmental officers. the coarse and fine aggregates to be used should comply with the requierments of IS 383-2016. (No separate payment will be made by the department for the exces usage of materials as per design mix.) (SI No 81)

Supply and Erection of 8 M Height Octagonal street light pole: Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octagonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70mm Thickness of Pole - 3 mm. The pole should be hot dip galvanized confirming to BESN ISO -1461 with thickness of 65 Micron etc., complete. as per standard specification.

Supply and fixing of 90W LED Street light fitting made up of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP66. Separate compartment for LEDs & electronic driver with CCT of 5700K, PF > 0.9. System efficacy >80. Operating voltage range of 120V to 270V with surge arrestor of 5.0 KV. Driver current not than 700mA. Approx. weight of 5.2Kgs. THD < 10%. Optics is of TYPE III Distribution. Lumens package not less 120 lm/W for LED Source. Test certificate from NABL accredited lab for LM79 report. In house Testing facility to be available for the same etc complete as per standard specification.

Labour charges for Erection of 8M Octogonal Pole with single arm Bracket and 90W LED fitting With Complete set with all labour charges, Crane Charges / Hydraulic ladder Charges etc; complete as per Standard Specification.as directed by the departmental officers.

Supply and laying of 3 core x 1.5 Sq.mm FR PVC copper cable for LED Power supply Cable, including Labour Charges as per standard specification. etc., complete. as directed by the departmental officers.

Supply and laying of 4 core x 16 sqmm PVC armoured (Aluminium) L.T.U.G. cable in a trench to be excavated at a depth of 0.7mtr putting 0.15 mtr layer of sand and covering the cable completly with bricks and sand and refilling the earth to make good.

Supply and providing of cable termination of 4 core x 16 sqmm PVC LT UG (Aluminium) armoured cable with necessary aluminium socket by crimping with electrical connection etc. complete

Supply and Laying of 50mm/38mm dia HDPE pipe on ground with necessary clamping arrangements etc complete.As directed by the departmental officers.

Supply and Erection of 6KVA, 3 phase street light Controller made up of metal enclosure to be IP55 and GPRS/GSM based remote street light monitoring system with capacity for self protection from short circuit over voltage and anti theft alert suitable for integrated with testing CCMC as directed by departmental officers

Supply and fixing of 3 phase Street light EB Service Main Switch box Mounted to EB Pole in Size of 0.75m x 0.45m x 0.75m Made out of 16SWG CR sheet Enclosed with Glass to View of Energy Meter with powder coated Painted in suitabe Colour with lock and key Door arrangements, including 40mm PVC Pipe , 7/20 Wire, , 63A FP MCB, 63A Fuse unit etc., Complete, as per Standard specification as per EB requirements as directed by departmental officers.

K.RAMESH (BID ID -1160571)