CONSTRUCTION OF SUB TREASURY OFFICE BUILDING AT RAKKAR DISTT KANGRA HP SUB HEAD SITE DEVELOPMENT CONSTRUCTION OF BUILDING POSTION INCLUDING WS AND SI SEPTIC TANK SOAK PIT AND RAIN WATER HARVESTING SYSTEM

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/ mechanical means, including saturated soil comprising of ordinary soil, ordinary rock, soft rock, hard rock chiseling or wedging out of rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines grades, cutting and trimming of side slopes, camber, super elevation and levels shown as per the drawings and as directed by the Engineer-in Charge complete in conformity with the requirements of MORD Technical Specification section 300 and 1600 and sorting out and stacking of useful materials with in all leads and lifts of material in acquired road width and transporting of un-useful materials for filling in road ways, camber, embankments for grade improvements and disposal of all surplus materials to the approved dumping sites through all modes of transportation including head load or animal transport or by mechanical means including leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. Recovery of stones to the tune of 52.20 cubic metre quantity at the rate of Rs. 300/- only (Rupees three hundred only) per cubic metre shall be effected from the contractor running bills on pro-rata basis as per actual quantity executed. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him to the extent of damage occurred in all cases. The rate is including Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Earth work in excavation in foundation for all types of structures such as retaining walls, breast walls, culverts, drains, parapets and other similar structures in all kinds and classification of soil, including saturated soil comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/ wedging out rocks (where blasting is prohibited) complete in accordance with the lines and dimensions shown on the drawings, including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any leads and lifts including dressing of sides and bottom and obstructions necessary for placing the foundations, trimming, leveling ramming and watering bottom of excavation and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 15cm (fifteen centimeter) compacted thickness including shoring and strutting and pumping or bailing out water (surface and sub-soil water) up to any depth and any quantum of water and cleaning of slush which may arise out during dewatering complete as per drawing and MORD Technical Specification clause 305.1 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete 1:5:10 (One cement isto five sand isto ten graded crushed stone aggregate 40mm(Forty millimeter) nominal size), in or under water in Retaining wall/breast wall and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying under water for all heights/depths and any quantum of water, including cost of form work and curing complete for 14 (fourteen) days and as per drawing and MORD Technical specification section 800, 900,1200 and 1600 and as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, toll tax, sales tax or any other taxes imposed by the Government.

Providing and laying 100mm (one Hundred millimeter) diameter ISI marked P.V.C. pipe Weep Holes in brick masonry/stone masonry/ plain/ reinforced concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1(V): 20H (One vertical isto twenty Horizontal) towards drawing face complete as per drawing and MORD technical specification clause 614,709,1204.3.7 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, GST, toll tax, sale tax or any other taxes imposed by the Government.

Back filling behind abutment Retaining wall/Breast wall, Wing walls and retrun wall with approved granular materials complete as per drawings and MORD technical specification clause 1204.3.8 and section 300 as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, toll tax, sale tax or any other taxes imposed by the Government.

Excavation in foundation trenches etcetera in earth work in all type of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the excavated soil clear from the edge of excavation within all leads and lifts as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, within all leads, and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil including chiseling or wedging out rocks where blasting is prohibited or any other mixed variety of soil including cost of shoring, strutting, dewatering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including clearing of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth upto any leads and lifts, disposed earth to be levelled and neatly dressed as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in Foundation footings, basis of columns etcetra and mass concrete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings shelves and the like floor etcetra upto any thickness upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in columns Pillars posts and struts, (Square rectangular or polygonal in plan) upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like, upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in columns Pillars posts and struts (Circular or curved in plan) upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landings upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels upto any heights/ depths upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Edges of slabs and breaks in floors and walls upto any width, upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (One cement is to six sand isto twelve graded crushed/ broken stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth in all depths, including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specification or as directed by the Engineer-in-Charge, and carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight graded/ crushed stone aggregate 40mm (Forty millimetre) nominal size) mixed mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete work 1:2:4 (One cement isto two sand isto four graded crushed/ broken stone aggregates 40mm (Forty millimetre) nominal size) mechanically mixed and vibrated and curing complete, excluding cost of form work in foundation and plinth in all depths including carriage of materials, within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix designed to obtain minimum compressive strength of 20 N/mm2 (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty kilogramme) per cubic metre for reinforced concrete chhajjas of any thickness upto all floor levels, including finishing the exposed surface with cement mortar 1:3 (one cement isto three sand) to give a smooth and even surfaces, including centering/form work and curing complete, excluding the cost of reinforcement complete, as per HPPWD specifications approved drawing, design or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, GST, toll tax, sale tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm2 (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty Killogramme) per cubic metre and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in mouldings as in cornices windows sills and the like in all girth complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm2 (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty Killogramme) per cubic metre and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in Foundation, footing, bases of columns and the like and mass concrete including pumping or bailing out water if any and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm2 (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty Killogramme) per cubic metre and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/thickness upto all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm2 (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty Killogramme) per cubic metre and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness and upto all floor level, including carriage of materials within all leads and lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm2 (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty Killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in walls (any thickness) but not less than 0.10 mtr. (Zero point one zero metre) thickness including attached pilasters buttersses,plinth and string courses etcetra from top of foundation upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, GST, toll tax, sale tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of 20 N/mm2 (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty Killogramme) per cubic metre and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing upto all floor level complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:1:2 (One cement isto one sand isto two graded crushed/ broken stone aggregates 20mm (Twenty millimetre) nominal size) mix designed to obtain the minimum compressive strength of grade M-30 (M-thirty) including curing complete, excluding cost of form work and reinforcement for reinforced concrete work, in walls (any thickness) but not less than 0.10mtr. (zero point one zero metre) thickness including attached pilasters, buttresses, plinth and string courses etcetera from top of foundation upto all floor level and curing complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying Mild steel/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wires complete and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in mud mortar complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all heights/ floor level in cement mortar 1:6 (One cement isto six sand) and curing complete, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Half brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:4 (One cement isto four sand) with hoop iron as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (un coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, GST or any taxes imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth upto all heights/ depths including pumping or bailing out water/dewatering and including racking out joints with cement mortar 1:3 (One cement isto three sand) and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all heights/ depths including pumping or bailing out water/dewatering including racking out joints in cement mortar 1:5 (One cement isto five sand) including carriage of materials within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood panelled glazed or panelled and glazed shutter for doors, window and clerestery windows including 12mm thick both side prelaminated water proof partical board of Action Tesa/Centuary/Kitply/Kitlam as per ISI specification and of approved shade below lock rail and 6mm (Six millimetre) thick glass pane of Modi Guard or its equivalent including black enamelled iron butt hinges with necessary screws etcetera complete as per approved drawing, design, specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded Termite resistant of CENTURY/ALPRO/DURA PLY ISI Marked factory made flush door shutter No. IS:2202 non- decorative type of Core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneer on both faces of flush door shutters including black enameled M.S butt hinges with necessary screws etcetera complete as per HPPWD specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G (eighty five galvanized) with wire of diameter 0.56mm (Zero decimal five six millimetres) for doors, windows and clerestory windows including bright finished black enamelled iron butt hinges with necessary screws, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm( twenty five millimetre) thick water proof commercial board of Centuary/ Kitply/Dura Ply with 6mm (Six millimetre) hard wood edging all around and 6mm (Six millimetre) thick ply backing for cupboard with butt joints and fixing with nails and screws etcetra complete as per HPPWD specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 19mm( Nineteen millimetre) thick water proof commercial board shutter of Centuary/ Kitply/Dura Ply in shelves and shutters with hardwood edging to be finished with mica lamination of approved shade for cabinet work including fixing with nickle plated piano hinges with screws etcetra complete as per HPPWD specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel curtain rods and brackets including fixing with 25x3mm (Twenty five into three millimetre) mild steel flat 10cm (Ten centimetre) long and plugs etcetra complete as per HPPWD specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. (Mild steel) plain grills 10x10mm (Ten into ten millimetre) square bar in combination of 20x4mm (Twenty into four millimetre) mild steel flat in structural steel/wooden frames of windows etcetera with M.S. flats, square or round bars bolts and nuts or screws including welding with frames complete in all respect including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts necessary screws etcetra complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 300x16mm (Three hundred into sixteen millimetre)

Providing and fixing anodized aluminium sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts necessary screws etcetra complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 250x16mm (Two hundred fifty into sixteen millimetre)

Providing and fixing anodized aluminium Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etcetra complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 300x10mm (Three hundred into ten millimetre)

Providing and fixing anodized aluminium Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etcetra complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 250x10mm (Two hundred fifty into ten millimetre)

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 125mm (One hundred twenty five millimetre)

Providing and fixing 100mm (One hundred millimetre) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) chromium plated brass knobs for cupboard or wardrobe with nuts etcetera complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into thirty five millimetre) special quality bright finished brass cup board or wardrobe locks of approved make (Harrison or equivalent) with six levers including necessary screws etcetera complete including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) M.S. (mild steel) double acting spring hinges with necessary screws etcetra complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) double action spring hinges stainless steel rebound hinges for swing door including fixing with nuts and screws etcetra complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 19mm (Nineteen millimeter) thick Mirror polished Kota stone 55x55cm (fifty five into fifty five centimeter) of uniform colour with 7.5cm (seven point five centimeter) wide Jaislmer yellow band as per design in flooring laid over 20mm (twenty millimeter) thick base of cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor level as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 10mm (ten millimetre) thick anti skid water proof stain and impact resistant heavy duty vitrified tile 600x600mm (Six hundred into six hundred millimetre) of Nitco/ RAK/Kajaria/ Orient & Bell/Simpolo/Johnson/ AGL of required shade in flooring, treads of steps and landings on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto three sand) and jointed with neat cement slurry mixed with pigment of required shade to match the shade of tiles complete as per HPPWD specifications or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 5.5mm (Five point five millimetre) thick anti skid ceramic tiles of premium quality of Nitco/Kajaria/Somany/Bell/AGL of 300x300mm (three hundred into three hundred millimetre) size manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement complete as per HPPWD specifications and as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 20mm (Twenty millimetre) thick Baroda Green marble work (Table rubbed and polished) with round nosing in flooring laid over 20mm (Twenty millimetre) thick base of cement mortar 1:3 (one cement isto three sand) including jointing with cement mortar 1:2 (one white cement isto two marble dust) with an admixture of pigment to match the shade of the marble including cuttimg, moulding and polishing etcetera complete up to all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

40mm (Forty millimetres) thick cement concrete flooring 1:2:4 (One cement isto two sand isto four graded/ crushed stone aggregate 20mm (Twenty millimetres) nominal size) mechanically mixed laid in one layer and finished with a floating coat of neat cement and curing complete upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 4mm (four millimeter) thick and 40mm (forty millimeter) wide glass strips in joints of cement concrete/terrazo flooring complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster skirting or dado (upto any heights) with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and rounding of junctions with floor and curing complete, upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimeter) thick Kota stone slab in flooring, treads of steps and landing with uniform nosing/edging laid on 20mm (Twenty millimeter) thick base of cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete up to all floor level as per approved drawing, design and specification or as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimeter) thick Kota stone slab in skirting, risers of steps and dado with uniform nosing/edging laid on 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete up to all floor level as per approved drawing, design and specification or as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying double charge/ultracharge vetrified tiles of size 600x600x8mm (Six hundred into six hundred into eight millimetre) Nitco/RAK/Kajaria/Orient & Bell/Simpolo/Johnson/AGL of approved shade and colour in skirting, risers of steps, dado etcetra laid on 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required up to all floor level complete as per approved drawing, design and specification or as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying ceramic glazed tiles of size 300x450mm (Three hundred into four hundred fifty millimeters) and 6mm (six millimeters) thick of approved brand and make of Nitco/Kajaria/Somany/Bell/AGL in skirting, risers of steps and dado for all heights, laid on 12mm (twelve millimeters) thick cement mortar 1:3 (one cement is to three sand) and jointed with white cement slurry complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into Twenty five millimeter) labrador design (rainbow series) tile flooring of NTC of approved shade laid on a bed of 20mm (Twenty millimeter) thick cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab/tiles (wherever required) complete as per approved drawings, design and specifications or as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimeter) thick unistone/NTC cladding on faces of masonry walls etcetra on 12mm (Twelve millimeter) thick cement plaster 1:3 (one cement isto three sand) and jointed with cement slurry including scaffolding etcetra complete upto all floor level as per approved drawing, design, specifications or as per direction and entire satisfaction of the the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 40mm (Forty millimetre) thick inter locking paver block upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub base of concrete with 25mm (Twenty five millimetre) average thickness of cement mortar 1:4 (One cement isto four sand) laid over and jointed with pigment neat cement slurry mixed with to match the shade of block and curing rubbing and polishing (Sub base concrete fllor to be measred and paid for seperately)complete as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 60mm (Sixty millimetre) thick inter locking paver blocks vibro compacted upto M-50 (M-fifty) grade including border or kurb block grey or coloured over sub base of concrete with 25mm (Twenty five millimetre) average thickness of cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing, rubbing and polishing complete (sub base concrete floor to be measured and paid for separately) as specified as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick ISI marked prepainted steel sheet in roofing over steel trusses with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millieter) diameter with prepainted limpet and rubber washers complete with all accesseries as required as per per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimetre) over all with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washer complete with all accessories as required as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing valley 60cm (Sixty centimetre) over all with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diameter with prepainted limpet and rubber washer complete with all accesseries as required as per specifications, approved drawings, design and as per direction of Engineer-In-charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall face 150mm (One hundred fifty millimetre) diameter P.V.C. (D-Plast) rain water pipes of working pressure not less than 4.50 Kg (Four point five zero kilogrammes) per Square Metre including filling the joints with approved adhesive complete and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. PVC plain bend 150mm (One hundred fifty millimetre) diameter.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. PVC shoe 150mm (One hundred fifty millimetre) diameter.

Providing and fixing PVC (Polyvinyl chloride) holder bat clamps for 150mm (one hundred fifty millimeter) diameter rain water pipe complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. (Mild steel) BP (Black plain) sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 0.63mm (Zero point six three millimetre) thick plain galvanised iron sheet 15cm (Fifteen centimeters) wide 45cm (Forty five centimetres) overall semicircular plain G.I. (Galvanised iron) sheet gutter with iron brackets 40x3mm (Forty into three millimetre) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete as per design and drawing, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. screen on gable end with 19x19mm (Nineteen into nineteen millimetre) mild steel hollow square bar at the rate 20cm (Twenty centimetre) centre to centre under mild steel black plain sheet including fixing to steel members/truss and applying a coat of red lead paint complete as per approved architectural drawing, design and specifications or as per direction and entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work composed of beam, joists, channels, angles, tees, flat and connecting plates or angle cleats etcetra as in trusses and trussed purlins, main and cross beams hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. In trusses and trussed purlins in building.

Steel work welded in built up sections, trusses and framed work composed of beam, joists, channels, angles, tees, flat and connecting plates or angle cleats etcetra as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. In gratings, framed guard bars, ladders, railing, brackets and similar works, ceiling frames etcetera.

Providing and fixing angle iron door frames single rebate manufactured from mild steel angle iron section 35x35x4mm (thirty five into thirty five into four millimeters) flapped with MS flat 50x4mm (fifty into four millimeters) welded together to make one frame including MS flat 50x4mm (fifty into four millimeters) welded at suitable intervals for holding the hold fast including hinges jambs, lock jambs, beed and if required angle thrashold of MS angle 50x25mm (fifty into twenty five millimeters) welded or rigidily fixed by mechanical means lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two point five millimetre) thick with a provision of locking arrangement and shock observer complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including applying a primer coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing mild steel channel frame for doors, windows and ventilators manufactured from ISLC-75 (Seventy five) mild steel channel section 75x40x4mm (Seventy five into forty into four millimetre) and M.S. (Mild Steel) flat 75x4mm (Seventy five into four millimetre) in combination welding together to make one frame as per design and approved drawing including hinges, jamb, lock jamb, beeds, and if required angle thrashold of mild steel angle 50x25mm (Fifty into twenty five millimetre) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jamb including steel butt hinges 2.5mm (Two point five millimetre) thick with a provision of locking arrangement, shock obserber as specified and including applying a coat of approved steel primer after pretreatment of the metal surfaces complete as per the diections of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimetre) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement isto three sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (Four millimetre) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paint and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. Fixed steel windows

Providing and fixing factory made double steel shutter window side hung (One glazed and other wire gauzed) including frame of channel ISLC-75 (Seventy five) flapped with mild steel flat 75x4mm (Seventy five into four millinetre) and 50x4mm (Fifty into four millimetre) with opening side of cannel to make multi frame and shutter of rolling steel Z-section and T-section and T-hinges, handles with closing device and making provision of fixing of window where required with 16x3.15mm (Sixteen into three point fifteen millimetre) lugs 10cm (Ten centimetre) long embedded in cement concrete block of 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (Four millimetre) thick with glazing clips and special metal sash putty of approved make for glazed shutter and metal beading with screws etcetra and including fixing of wire gauge using galvenized mild steel wire gauge of IS gauge designation 85-G (Eighty five-G) with wire of diameter 0.56mm (Zero point five six) millimetre) and for fixing wire mesh with mild steel flat 20x3mm (Twenty into three millimetre) for beading and screws and applying a priming coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. Side Hung window (double shutter one glazed and other wire glazed)

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimetre) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement isto three sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (Four millimetre) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paint and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. Top hung Ventilators

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimetre) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement isto three sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etcetra including providing and fixing of glass panes 4mm (Four millimetre) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paint and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. Fixed steel ventilator

Providing and fixing MS fan clamps type-I of 16mm (Sixteen millimetre) diameter mild steel bars bent to shape with hooked ends in reincefirced cement concrete slabs during laying including painting the exposed portion of loop all as per standard design complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing SST railing for main stair case as detail with 50mm (Fifty millimetre) diameter stainless steel pipe handrail fixed with 35mm (Thirty five millimetre) diametre stainless steel pipe baluster at required space including welding, griding, buffering, polishing and making curvature when required and fixing with necessary nuts and bolts complete including fixing the railing with necessary accessaries and stainless steel fastner with suitable arrangement as per approved architectural drawing, design and specifications, as per the directions and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing MS railing for ramp for divyang with 50mm (fifty millimeter) diameter mild steel pipe handrail slip resistant with round ends at two level at 75 and 90cm (Seventy five and ninety centimeter) height and extended 30cm (thirty centimeter) beyond the top and bottom of railing with 25mm (Twenty five millimeter) diameter mild steel pipe blusters welded to 50mm (fifty millimeter) diameter mild steel pipe embeded in cement concrete at 600mm (six hundred millimeter) cente to centre duly welded with MS flat 50x5mm (fifty into five millimeter) including and applying a coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (Twenty into ten into two millimeter) and braced with flat iron diagonals 20x5mm (Tweny into five millimeter) size with top and bottom rails of T.iron 40x40x6mm (Forty into forty into six millimeter) with 38mm (Thirty eight millimeter) diameter steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint as per approved specifications, design, drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing in position door for strong room composed with frame of ISLC 75 (Seventy five) for frame and angle iron 75x75x6mm (Seventy five into seventy five into six millimetre) for door frame with 20mm (Twenty millimetre) diametre bar including locking arrangement complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint as per approved specifications, design, drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surface under coat with enamel paint other than white of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete with enamel paint other than white and carriage of materials, within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Applying two or more coats of Birla White wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete upto all floor level as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete upto all floor level as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion paint of Apex/Ultima of Asian/Nerolac paints of approved brand and manufacture and of required shade on undecorated wall surfaces (two or more coats) to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered material incluing applying of putty as required for making the surface complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Wall painting (two or more coats) with acrylic washable emulsion paint of Asian/Nerolac/Berger/Dulex /Apex/Ultima and of approved shade for interior grade on undecorated concrete/stone /plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

6mm (Six millimetre) thick cement plaster to ceiling with cement mortar 1:3 (One cement isto three sand) upto all floor level complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster with cement mortar 1:3 (One cement isto three sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster with cement mortar 1:3 (One cement isto three sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Making grooves in external cement plaster for door and window chajja and ducts for making design pattern in elevation including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Distempering (two or more coats) with dry distemper of approved brand and manufacture (Nerolac/Asian) and of required shade on un-decorated wall surfaces to give an even shade over and including primer coat of whiting of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying semi-circular stone ware wipe over a bed of plain cement concrete 1:1.5:3 (One cement isto one decimal five sand isto three graded crushed stone aggregate 20mm (Twenty millimetre) nominal size including jointing the stoneware pipe with each other in drain complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and filling crushed stone or brick aggregate 40mm (Forty millimetres) nominal size) in soak pit as per directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size) for surrounded or encasing stoneware pipes of following internal diameters with necessary form work and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government..150mm (One hundred fifty millimetre) diameter.

Providing and fixing ISI marked P.V.C. cowl Finolex / Relpipe (Reliance)/ Vectus including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 100mm (One hundred millimetre) diameter.

Providing and fixing 200mm (two hundred millimetre) wide cast iron rungs chequered or ribbed non slip surface including fixing in manholes with 200x200x100mm (Two hundred into two hundred into one hundred millimetre) cement concrete 1:3:6 (One cement isto Three sand isto Six graded stone aggregate 20mm (Twenty millimetre) nominal size) and curing complete, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing cast iron cover (light duty) single seal pattern-I 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimension the total weight of frame and cover to be not less than 38 kgs. (Thirty eight kilogrammes) (weight of frame 15 kgs. (Fifteen kilogrammes) and weight of cover 23 kgs. (Twenty three kilogramme) including carriage of materials within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked sand cast/cast iron spun spigot and socket soil, waste and ventilating pipe of following size complete as per HPPWD specifications or as directed by the Engineer-in-Charge, (lead caulked joint to be measured and paid for separately) including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.- 100mm (One hundred millimetre) diameter

Providing and fixing ISI marked high pressure P.V.C.(Polyvinyl chloride) spigot and socket waste and ventilating pipes of Finolex / Relpipe (Reliance)/ Vectus including fixing with approved adhesive etecetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 110mm (One hundred ten millimetre) diameter.

Providing and lying in trenches ISI marked galvanized mild steel tubes (Medium grade) tube fittings of approved brand and manufacture (TATA/ JINDAL MAKE) complete (earth work in trenches to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 40mm (Forty millimetre) nominal bore.

Providing and fixing Hindware/Cera/Jaquar make Orissa pattern vitreous China water closet squatting pan (Indian type W.C. pan) No. 20090 of size 53x41cm (Fifty three into forty one centimetre) ( earth work, bed concrete, foot rest and trap to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing Hindware/Cera/Jaquar make European viterous china wash down water closet (Eroupen type W.C. pan) star seriol No. 20087 (S-10) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetre) of approved colour and shade with jet pressure of Hindware/Cera/Jaquar of Star white/Snow white shade with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement isto One sand) (seat and cover to be measured and paid for separately), including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C (Poly venyl chloride) Finolex / Relpipe (Reliance)/ vectus, confirming to IS-14735-99 'P' or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with pan and PVC pipe with approved adhesive etcetra complete as per approved drawing, design and specification or as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 10 (Ten) litres capacity (full flush) PTMT coloured high density polyethylene / poly propylene European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (Forty millimetre) diameter chromium plated flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 5.00 (Five) litres capacity PTMT coloured/white automatic flushing cistern with a pair of PVC/C.I. or M.S. brackets complete with fittings including PVC syphonic apparatus mosquito proof lid, PVC unions and couplings for connection with inlet, outlet and over flow pipes including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china flat back bowl pattern urinal No. 60002 of Hindware /Cera/ Jaquar star white/snow white shade of size 39x37.5x59cm (Thirty nine into thirty seven decimal five into fifty nine centimetre) including connection the urinal with waste pipe by means of white lead mixed with chopped hemp complete including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china Division plate for urinal of size 600x300mm (Six hundred into Three hundred milimetre) with integral longtitudinal flush pipe as per approved drawing, design and specification or as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore chromium plated brass flush pipe /spreaders make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera for urinal with fitting such as unions,clamps etcetra (all in C.P. Brass) including cutting holes and making good the same as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing solid type white plastic seat and cover for wash down water closet with C.P. (Chromium plated) brass hinges and rubber buffers complete including carriage of materials within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing viterous china wash basin of Hindware/Cera/Jaquar make Delta No. 10010 of size 55x40cm (Fifty five into forty centimetre) of snow white shade with single hole for pillar tap with GI or MS bracket painted with white including cutting holes and making good the same etcetra complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing viterous china wash basin of Hindware/Cera/Jaquar make Garnet No. 10080 of size 58x43cm (Fifty eight into forty three centimetre) of star white/snow white shade with single hole for pillar tap with GI or MS bracket painted white including cutting holes and making good the same etcetra complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked stainless steel kitchen sink 610mmx460mm (Six hundred ten millimetre into four hundred sixty millimetre) with bowl depth 200mm (Two hundred millimeter) diamond model code No. WB-2116 with drain board and chromium plated waste pipe with C.I. or mild steel brackets painted white including cutting holes and making good the same but excluding fittings complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) nominal bore PTMT waste coupling of approved quality and colour complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked 32mm (Thirty two millimetre) nominal diameter P.V.C. waste pipe for wash basin or sink including brass check nut complete and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred millimetres into four hundred fifty millimetres) Bevelled edge mirror of superior glass mounted on 6mm (Six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. (Chromium plated) brass screws and washers, complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 600mmx20mm (Six hundred millimetre into twenty millimetre) C.P. (Chromium plated) brass towel rail make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete with C.P. (Chromium plated) brass brackets fixed to wooden plugs with C.P.(Chromium plated) brass screws, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 600mmx120mm (Six hundred miimetres into one hundred twenty millimetre) glass shelf with chromium plated brass brackets and guard rail complete fixed to wooden plugs with C.P. (Chromium plated) brass screws etcetera complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera with C.P.(Chromium plated) brass bracket fixed to wooden cleats with C.P.(Chromium plated) brass screws, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. (Chromium plated) brass shower rose 150mm (One hundred fifty millimetre) diameter, with 15mm (Fifteen millimetre) or 20mm (Twenty millimetre) inlet make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diameter chromium plated brass bib tap with capstan head make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diameter chromium plated brass (Heavy duty I.S.I. marked No. 8931 and 8934) pillar tap with capstan head make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete, upto all floor level including carriage of materials, within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) mixer for kitchen sink with top / bottom swinging spout make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete, upto all floor level including carriage of materials, within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen millimeter) diameter C.P. (Chromium Plated) brass angle valve without nuts and pipe make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete as per approved drawing, design, specification and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diameter chromium plated brass stop cock make of Continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked 45cm (Forty five centimeters) long and 15mm (Fifteen millimetre) nominal bore PVC connections pipe with brass unions, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor (PE-AL-PE) polyethylene aluminum polyethylene composite pressure pipe U.V. stabilized with carbon black and fittings of kitec confirming to I.S. 15450-2004 for water supply complete with necessary pipe fittings including cutting, fixing and making good the walls, ceiling and floors upto all floor level and carriage of materials within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 1216 (16mm (Sixteen millimetre) outer diameter)

Providing and fixing to wall ceiling and floor (PE-AL-PE) polyethylene aluminum polyethylene composite pressure pipe U.V. stabilized with carbon black and fittings of kitec confirming to I.S. 15450-2004 for water supply complete with necessary pipe fittings including cutting, fixing and making good the walls, ceiling and floors upto all floor level and carriage of materials within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 2025 (25mm (Twenty five millimetre) outer diameter)

Providing and fixing to wall ceiling and floor (PE-AL-PE) polyethylene aluminum polyethylene composite pressure pipe U.V. stabilized with carbon black and fittings of kitec confirming to I.S. 15450-2004 for water supply complete with necessary pipe fittings including cutting, fixing and making good the walls, ceiling and floors upto all floor level and carriage of materials within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 1620 (20mm (Twenty millimetre) outer diameter)

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for cold water supply, equal tees 1216 (One thousand two hundred sixteen) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for cold water supply, equal tees 1620 (One thousand six hundred twenty) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for cold water supply, reducing tees 2025xall branches (Two thousand twenty five into all branches) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for cold water supply, female elbow 1216x15mm (One thousand two hundred sixteen into fifteen millimeter) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for cold water supply, male thread connector 1216x15mm (One thousand two hundred sixteen into fifteen millimeter) thread with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for cold water supply, coupler 1216 (One thousand two hundred sixteen) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for cold water supply, coupler 1620 (One thousand six hundred twenty) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for cold water supply, coupler 2025 (Two thousand twenty five) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for hot water supply, equal tees 1216 (One thousand two hundred sixteen) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for hot water supply, female elbow 1216x15mm (One thousand two hundred sixteen into fifteen millimeter) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for hot water supply, male thread connector 1216x15mm (One thousand two hundred sixteen into fifteen millimeter) thread with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing PE-AL-PE (Polyethylene aluminum polyethylene) composite end seal compression fittings as per IS 15450-2004 for hot water supply, coupler 1216 (One thousand two hundred sixteen) with jointing, testing and fitting complete including cutting and making good the walls etcetra as per HPPWD specifications, as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and placing three layered PVC water storage tank of ISI:12701 marked of 500 (Five hundred) litres net capacity complete in all respect with necessary fittings, G.I. inlet and outlet connection 15mm (Fifteen millimetre) nominal bore ball valve with polythene float and masquito proof PVC cover with locking arrangement including providing pads of size as required including hoisting upto any height, and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and placing three layered PVC water storage tank of ISI:12701 marked of 1000 (One thousand) litres net capacity complete in all respect with necessary fittings, G.I. inlet and outlet connection 15mm (Fifteen millimetre) nominal bore ball valve with polythene float and masquito proof PVC cover with locking arrangement including providing pads of size as required including hoisting upto any height, and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 110x90 mm ( one hundred ten into Ninety millimeter) PVC (Polyvinyl chloride) floor trap of (Finolex / Relpipe (Reliance)/ Vectus) self cleaning design including fixing with approved adhesive, cost of cutting making good the wall and floor etcetra complete as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked high pressure P.V.C.(Polyvinyl chloride) spigot and socket soil, waste and ventilating pipes of Finolex / Relpipe (Reliance)/ Vectus including fixing with approved adhesive etecetra complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 150mm (One hundred fifty millimetre) diameter.

Providing and fixing ISI marked P.V.C (Polyvinyl chloride) double equal branch with oval access door with insertion rubber washer, 3mm (Three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 150mm (One hundred fifty millimeter) diameter

Providing and fixing ISI marked P.V.C (Polyvinyl chloride) double equal branch with oval access door with insertion rubber washer, 3mm (Three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 110mm (One hundred ten millimetre) diameter.

Providing and fixing P.V.C. plain bend ISI marked make of Finolex / Relpipe (Reliance)/ Vectus including fixing with approved adhesive etcetra complete and carriage of materials within all leads, lifts and other incidental Charges.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. P.V.C. Plain Bend 150mm (One hundred fifty millimeter) diameter

Providing and fixing P.V.C. plain bend ISI marked make of Finolex / Relpipe (Reliance)/ Vectus including fixing with approved adhesive etcetra complete and carriage of materials within all leads, lifts and other incidental Charges.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. P.V.C. Plain Bend 110mm (One hundred ten millimetre) diameter

Providing and fixing P.V.C (Polyvinyl chloride) clamps ISI marked make of Finolex / Relpipe (Reliance)/ Vectus of approved design with steel screws and rawl plugs etcetra complete as per approved drawing, design and specifications, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 150mm (One hundred fifty millimeter) diameter

Providing and fixing P.V.C (Polyvinyl chloride) clamps ISI marked make of Finolex / Relpipe (Reliance)/ Vectus of approved design with steel screws and rawal plugs etcetra complete as per approved drawing, design and specifications, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 110mm (One hundred ten millimetre) diametre

Providing and fixing ISI marked P.V.C. cowl Finolex / Relpipe (Reliance)/ Vectus including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 150mm (One hundred fifty millimeter) diameter

Providing and fixing ISI marked P.V.C. cowl Finolex / Relpipe (Reliance)/ Vectus including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 110mm (One hundred ten millimetre) diametre

Providing and fixing ISI marked 100mm (One hundred millimetre) sand cast iron grating for gully/ floor or Nahni trap complete including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal bore brass full way valve with wheel, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) nominal bore brass full way valve with wheel, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) nominal bore brass full way valve with wheel, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement isto three sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size) bedding for PVC/stoneware pipes of following internal diameters with necessary form work and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 150mm (One hundred fifty millimetre) diameter.

Providing and laying cement concrete 1:3:6 (One cement isto three sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size) bedding for PVC/stoneware pipes of following internal diameters with necessary form work and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. 100mm (One hundred millimetre) diameter.

Constructing manhole with RCC (reinforced cement concrete) top slab in 1:2:4 mix ( one cement isto two sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size) foundation concrete1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (forty millimetre) nominal size) inside plastering 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm(Twenty millimetre) nominal size) mix, finished smooth complete including curing and testing: Inside size 800mm x 800mm (eight hundred millimetre into eight hundred millimetre) and 500mm (Five hundred millimetre) deep including C.I cover with frame. (Light duty single seal pattern -1) 455 mmx610mm (Four hundred fifty five millimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38kg. (Thirty eight kilogrammes) (Weight of cover 23 kg (Twenty three kilogrammes) and weight of frame 15 kg. (Fifteen kilogramme) with 300mm (three hundred millimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement isto three sand) complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cement concrete) top slab in 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm(twenty millimetre) nominal size) mix foundation concrete1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (forty millimetre) nominal size) inside plastering 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size) mix finished smooth complete including curing and testing: Inside size 800mm x 800mm (eight hundred millimetre into eight hundred millimetre) and 1000mm (one thousand millimetre) deep including C.I cover with frame. (Light duty single seal pattern -1) 455 mmx610mm (Four hundred fifty five millimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38kg. (Thirty eight kilogrammes) (Weight of cover 23 kg (Twenty three kilogrammes) and weight of frame 15 kg. (Fifteen kilogramms) with 300mm (three hundred millimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement isto three sand) complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

C M RANA