Addition of New Hospice Facility at Sabbavaram, Homi Bhabha Cancer Hospital and Research Centre, Aganampudi, Visakhapatnam, Andhra Pradesh, 530053.

Civil Works

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement: 4 coarse sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing bolts including nuts and washers complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling precast concrete or stone slabs in walls, partition walls etc.including stacking within 50 metres lead :Thickness up to 40 mm

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Supplying and stacking at site.90 mm to 45 mm size stone aggregate

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer- in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing and fixing gun metal non- return valve of approved quality(screwed end) : 32 mm nominal bore Vertical

Supply ,Fabrication,transportation and Installation of GI Portable Security Cabin of size 4' x 4' x 8'-6'' height, manufactured from GI Sections with insulated wall panels,GI roof with weather protection, Provision of one lockable door, minimum two windows with grill and sliding shutters,internal & external painting/finishing, provision of internal electrical wiring with led light and switch sockets, and all necessary accessories, complete in all respect, including labour, materials, loading, unloading,positioning and fixing at site etc. complete.(Refer tender documet for detail technical specification)

PVC PIPES & FITTINGS(Materials shall be procured fromthe list of approved Brands/ Manufacturers/ Suppliers) (110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm)Existing drainage line connection

110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings

110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Rabbit wire mesh (chicken mesh) of not less than 30 gauge

Electrical works

CCTV System

Supply, Installation, Testing and Commissioning of 16CH Embedded 4K NVR 2 SATA expandable up to 20TB, audio input & Output, Two way communication supported, G7.11 audio format support, 512 Mb recording throughput, 2 alarm inputs & 1 Output, RS485, HDMI, to be supported with maximum 16 users, Op. temp 0 to 50 deg. C, NDAA compliant, UL/CE/FCC certified. Makes: D-Link/CP-Plus/PRAMA.

Supply, Installation, Testing and Commissioning of 4MP or higher IR Bullet, fixed lens min 2.8mm 1.2/8 progressive CMOS image sensor, Min. Illumination 0.01(color), S/N Ratio: 50dB, Electronics Shutter: 1/15 ~ 1/100000, IR Distance: 30M, with built in video analytics ,WDR~120dB/BLC/HLC/3D DNR, Gain Control: 0~100%; SD card up to 256GB, Video Compression:H.265 /H.264/MJPEG, Smart Codec; Triple Stream; Protocals: H.265 /H.264/MJPEG, Smart Codec; ONVIF: S/G/T; Op. Temp: -30 to 60 Deg; power consumption max. 6W; IP67,IK10,BIS Compliance accessories mounts to be considered. Makes:-D-Link/CP-Plus/PRAMA.

Supply and fixing of Surveillance HDD-4 TB. Makes: Seagate/Hitachi/TOSHIBA/ED

Supply, laying ,testing and commissioning of 4-pair, 6 STP Solid cable (Third party ETL Intertek tested up to 600 MHZ ) to support 1Gbps with Cross (+) filler pair separator & PVC sheath 23 AWG, STP/UTP Cable , Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways /PVC conduits including making connections to information outlets and patch panels with ferruling at both ends for identification with necessary tools for punching stripping crimping and testing required etc., complete. Makes: Systimax /Panduit/ Siemond/ Legrand /R&M /Digisol

Supply, Installation, Testing and Commissioning of 6 U(44 mm ) wall mounted Communication rack in one section with glass doors, swing handles, lock, Top and Bottom Cable entries, supports for mounting rack on wall, Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers, power supply box for supplying power to hubs, fans etc., along with earth continuity kit, MCB, indicator, moulded power supply cable, Blank panels, sliding shelves etc. Makes: APW/HCL/Valrack/Netrack/R&M

Supply and fixing of 8 PoE 10/100/1000 ports + 2 Gigabit SFP ports with 175W Web Smart Switch. Makes: D-Link /Cisco/Netgear/HP

Supply and laying of 2 mtr. HDMI- HDMI Patch Cords. Makes: D-Link / TP-Link/ Netgear/Cisco

SITC of 125 KVA DG Trailer (Refer tender documet for detail technical specification)

Supply of 20A Metallic Plug and Socket with provision for 1 No of 20A SP MCB for control in SS enclosure as per IS 8623; IS 13032; IEC 61439-3

Supply and Transportation of 3C x 4 sq.mm XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc., complete. Makes: Torrent / Universal / Unicab / Havells / KEI /Polycab/ Gloster/Orbit/ Paragon/RR Kabel / KEC/Asian Cables / Rhino /Pawancab/AKG/LS cable/Polywires/South king/Avocab/ emscab/Batra Henlay

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.

Shifting and commissioning of DG and AMF Panel (Refer tender documet for detail technical specification)

Supply of 7 Segment 8 Way TPN DB with IP 42 Protection with provision for FPMCB / Isolator / RCCB / RCBO as incomer, 3Nos DPMCB / Isolator /RCCB / RCBO as sub incomer and 24Nos SPMCB's as outgoing MCBs as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS.

Supply and transportation of 150W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F >0.90, high power LEDs, with a System Efficacy >=100 lumens/watt andjunction temperature < 70°C, with ingress protection IP66, Luminaireperformance complies to IS 10322 (Part 5 / Sec-5), IK05, driver surgeprotection 4KV, In-house additional surge protection ≥ 10KV with wide/narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, ,CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty

Supply and making end termination with heavy copper lugs (pin/ ring type) as per IS specification, duly crimped with crimping tool, PVC tape etc., of sizes up 16 Sq.mm

Supply and making end termination with heavy copper lugs (pin/ ring type) as per IS specification, duly crimped with crimping tool, PVC tape etc., of size of 25 Sq.mm

Supply and making end termination with heavy copper lugs (pin/ ring type) as per IS specification, duly crimped with crimping tool, PVC tape etc., of size of 35 Sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for 3.5 Core 25 Sq.mm size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: As per list of recommended brands.

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for 3.5 Core 35 Sq.mm size of Armoured PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 volt grade as required of size. Makes: As per list of recommended brands.

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Supplying and laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.

Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply of 6-32A, DP MCB 10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category I

Supply of 40-63A, FP MCB 10KA C/D Curve ISI Mark. Makes: As per list of recommended brands as category I

Providing of independent chemical earthing after excavating an earth pit. the earth electrodes, 50mm dia, wall thickness, 1.8mm, 3 mtr long pure copper pipe, strip in pipe system fitted with 40x6x3100mm pure copper strip from top to bottom, terminal hole of 12mm, pipe filled with conductive crystalline compound, including 2 bags of earth life compound (25 kgs each) as per IS 3043. with earth inspection chamber of dimensions: Width: 320 mm x 320 mm, Height: 192 mm, Weight: 30 Kgs, Load bearing capacity: 5000 Kgs including drilling of bore in any kind of soil.

Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982

Supply, Transportation and fixing of storage / Pressure type Vertical /Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with Glass/SS tank and ABS plastic body of 25 Ltrs capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on outlet side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes: As per list of recommended brands.

Supply and fixing of Automatic Street Light Controller with optical micro sensor low voltage/ High Voltage trip and reset operating voltage 150 - 280V AC, withstands up to 440V, 50 HZ with suitable ABS enclosure of IP 54 protection, suitable to control the load of 10A of single phase with necessary arrangements etc complete. SLASM-03-10A /equivalent (Time setting 4hr,6Hr,8Hr) Makes: As per list of recommended brands.

Mechanical Works

HVAC Works

MS Supports :Supply, fabricating, installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts, washers etc complete with painting.( Size 50 mm X 50 mm X 5 mm MS Angle).

Fire Fighting

DCP Fire Extinguishers 2 Kg :Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 2 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 3.6 kg, empty wt.1.6 kg, Discharge time minimum 8 sec, controllable discharge mechanism, range min. 2 mts applicable on classes A,B, C & electrically started fire, A rating -2 A, B rating -21 B, can construction: Deep drawn and Co2 MIG welding, Valve construction:Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can: Epoxy polyester powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete.

DCP Fire Extinguishers 4 Kg :Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 4 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 6.9 kg, empty wt.2.9 kg, Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -3 A, B rating -34 B, can construction: Deep drawn and Co2 MIG welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can: Epoxy polyester powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete.Make :

MGPS System

Supply and Fixing of 2 x 5 Oxygen Emergency Manifold with 19 mm O.D x12 mm ID Copper Pipe mounted on Top Frame, Middle Frame and Bottom Frame, along with brass blocks, NRVs/Cylinder Valves and Pigtail Pipes of 1 mtr long of size 8 mm O.D x 3 mm I.D,duly tested at 250 Kg/Cm2 pressure and manifold fixed with High Pressure Valve System fixed on the Manifold both the Sides.

SITC of Oxygen Amico PB type Gas Outlet point flow rate 0 - 15LPM (panel mounted type)

Oxygen Flow Meter : Supply Installation Testing & Commissioning of PB type wall mounted Oxygen Flowmeter BPC (0- 15 LPM) having brass body with Humidifier ,including tubings .Complete in all respect. Make: Amico/Aktive technologies/GHPL/MDD/Medi Tech

15mm Copper Pipe

12 mm Copper pipe

MOX Regulator (Double stage) for Oxygen Manifold

Supply Installation Testing & Commissioning of 150KG Brass Medical Gas Isolation Valves - Ball Valve and Pressure Guage with necessary Brass fittings and Nipples, NFPA99 standard & UL listed / EN ISO IMPORTED

15mm Isolation valve with Pressure Guage (150Kg/cm2)

Cylinder Trolley : Supply,Installation, Testing and Commissioning of Mild Steel ,Trolley for B Type Cylinder, Water Capacity :10 Ltr ,Colour :White, No. of Wheels -02 No's.

Cylinder opener key

Cylinder adjustable spanner

Oxygen Flow Meter with reducer for B type cylinder : Supply Installation Testing & Commissioning of Humidifier for B-Type Oxygen cylinder with BPC Flow meter and Pressure Regulator reducing from 200 Kg/Cm2 to 4 Kg/Cm2, Bull Nose Analog Pressure Gauge ( Input Pressure - 15 Mpa & Out put Pressure -0.2 to 0.5 Mpa ,Safety Valve: 0.35 +/- 0.05 Mpa . Type : Double Gauge Single Stage MOX ( AS PER NFPA 99 COMPLIANCE & UL LISTED / EN ISO) Make for Humidifier :Amico/Aktive technologies/GHPL/MDD/Medi Tech, Make for Reducer : ESAB/Medi Tech