T-22/EDCP/2025-26

Amount

Safe carriage of following materials from store centre-Pilibhit to various sites under EDD-Bisalpur including loading & unloading both end distance up to 0-60 Km. (sites/location detail enclosed as per annexure-10).

11/0.4 KV, 100 KVA T/F.

PCC POLE - 8.5 MTR LONG

ST POLE – 11 MTR LONG.

LT PVC CABLE 3.5X150/70 SQ. MM

LT LEAD LT XLPE CABLE 1X120 SQ MM

AB CABLE (3X120+1X95+1X16) SQ MM

AB CABLE (3X95+1X70+1X16) SQ MM

AB CABLE (3X50+1X35+1X16) SQ MM

3 PHASE DISTRIBUTION BOX

33 KV VCB 800 A

33 KV SINGLE T/F CONTROL PANNEL

CONTROL CABLE 4X2.5 SQ MM

CONTROL CABLE 2X2.5 SQ MM

Other Balance estimated centrelized material, 11 KV MS T-OFF CHANNEL, Top Channel (125x65x2240 mm), Dropper Channel (100x50x2028 mm), MS Angle (75x75x6x2028 mm) bolt & Nut, S/S Base Angle(75x75x6x2028 mm) bolt & Nut, Composite POLYMERIC 11 KV Disc Insulator 45 KN T&C TYPE, 11 KV DISC Insulator, 11 KV DISC FITTING (45 KN) T&C TYPE, Composite POLYMERIC 11 KV Pin Insulator, 11 KV TPMO WITH POLYMERIC INSULATOR, 11 KV Fuse Set, LT Incoming Panel with metering equipment, ACSR Weasal Conductor , MS EARTHING ROD (2540X20) MM , GI WIRE 8 SWG. FOR EARTHING, GI WIRE 6 SWG. FOR EARTHING, Connecting lead 1x16 sqmm, STAY SET 16X1800 MM and STAY WIRE (3.15 MM) 7/10 SWG (GSS WIRE) etc.

Erection of the single PCC Pole including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. All types of clamps, stone pad, nut, bolt washers would be provided by the contractor.

Erection of the single ST Pole including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. All types of clamps, stone pad, nut, bolt washers would be provided by the contractor.

Erection of the double PCC Pole including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing. All types of clamps, stone pad, nut, bolt washers would be provided by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. Brick, ballast, sand etc would be provided by the contractor.

Concreting of STP/PCC at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Earthing of STP/PCC/TFs of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Laying and sagging of 3 phase ACSR Weasel conductor fixing of all type of insulators, binding, jointing and its clamping etc in all respect (only conductor provided by Department)

Earthing of T/Fs by boaring type up to water level as per norms of UPPCL by providing GI pipe and making connection from boaring site to body and neutral of T/F. (All Material will be provided by Contractor on his own cost).

Fabrication and Installation of 11 KV fuse set on midway 11 KV double pole structure with mention material As- MS channel 100x50x2028 mm, Iron strip-50x5x305 mm, fuse wire and holding clamps etc. complete work in all respect all required materials provided by contractor on his own cost.

Mounting of 11/0.4 KV, 100 KVA distribution transformers on newly constructed Double pole, laying of cable jumpering and making all HT/LT connections complete work in all respect.

LAYING OF LT PVC CABLE 3.5X150/70 SQ.MM

LAYING OF LT LEAD LT XLPE CABLE 1X120 SQ MM

LAYING OF ABC CABLE (3X120+1X95+1X16) SQ MM

LAYING OF ABC CABLE (3X95+1X70+1X16) SQ MM

LAYING OF ABC CABLE (3X50+1X35+1X16) SQ MM

FIXING OF 3 PHASE LT DISTRIBUTION BOX

PROVIDING AND FIXING OF HOLDING CLAMPS FOR S/S WITH BOLTS & NUTS

PROVIDING AND FIXING OF HOLDING CLAMP FOR TOP CHANNEL TPMO & FUSE SET ETC. WITH BOLTS

PROVIDING AND FIXING OF PG CLAMPS

PROVIDING AND FIXING OF STONE PAD

PROVIDING AND FIXING OF DANGER BOARD WITH CLAMP

PROVIDING AND FIXING OF GI BARBED WIRE

PROVIDING AND FIXING OF DISTRIBUTION BOX CLAMP

PROVIDING AND FIXING OF PIERCING CONNECTOR

PROVIDING AND FIXING OF LT SHACKLE INSULATOR WITH N&B

PROVIDING AND FIXING OF LT CLAMPS WITH N&B

PROVIDING AND FIXING OF LT T-OFF CHANNEL CLAMP with NUT & BOLT

PROVIDING AND FIXING OF LUGS OF SUITABLE SIZE AS PER LT LEAD (70 SQ MM)

PROVIDING AND FIXING OF STAY CLAMP

PROVIDING AND FIXING OF STAY INSULATORS

PROVIDING AND FIXING OF EARTH WIRE CLAMP

PROVIDING AND FIXING OF 11 KV DISC FITTING

PROVIDING AND FIXING OF SUSPENSION CLAMP WITH I HOOK

PROVIDING AND FIXING OF DEAD END CLAMP WITH I HOOK

Mounting and Installation, including mechanical and electrical fixing and adjusting of the 33 KV VCB on their respective structures including proper adjustment as per norms of UPPCL.

Received back material from site to Store center Pilibhit

TYCOON ENGINEERS (BID ID -5563827)

Bharat Trading Corporation (BID ID -5551431)