Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance VPO BARI TEHSIL FATEHPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 175013 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance VPO LARHOON TEHSIL FATEHPUR DISTT KANGRA H P | Admitted-Finance |
| 4 | Admitted-Finance GOVT CONTRACTOR VILLAGE PO RAJA KA TALAB TEHSIL FATEHPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 176001 | Admitted-Finance |
| 5 | Admitted-Finance NOT MENTIONED | Admitted-Finance |
Tender Value
₹5.3 L
EMD Value
₹10,600
Closing Date
11 Apr 2025, 11:00 amClosed
Executive Engineer
Executive Engineer Jal Shakti Division Fatehpur
R/M of LWSS Larhoon Khas Sarja Ka Talab Chamral under JSV Section Rehan Sub Division Raja Ka Talab under Division Fatehpur SH- Providing and Installation of centrifugal pumping machinery set along with allied accessories etc
2025_HPIPH_103266_1
NIT NO. 1-40 dated 01-04-2025
Open Tender
Civil Works
Item Rate
Tehsil Fatehur
As per notice inviting Tender
8 documents required · 8 mandatory
₹500
EE Fatehur
₹10,600
23 Apr 2025
1 Apr 2025
11 Apr 2025
1 Apr 2025
11 Apr 2025
1 Apr 2025
Amount
Supply of erection of horizontal spindle horizontal radial split causing and suction ( Bacpull out arrangement single double multistage centrifugal pumps or combination of pumps in series parallel of KSB, Mather & Patt/Jyoti/Kirloskar /BE/Maxflow/Beaconweir make confirming to BIS:1520-1980 (latest with upto date ammendments) read with BBIS -9137-1978 ( latest addition) suitable for lifting clear water of under mentioned charactristics with impellers of bronze /suitable alloy priming funnels casing ring and shaft sleeves of bronze /suitable alloy shaft of suitable steel grad with cast iron casing coupled directly through a flexible coupling on a common C.I cast steel base plate ( Base plate to the from the principle manufacturer of pumping set ) to slippering /squirrel cage screen protected drip proof electric induction motor of Kirloskar /NGEF /Cromption /Siemens /Jyoti /Bhel/GEC/conforming to BIS :325-1978 read with BIS:- 900-1968( latest with update ammendments) it should include the cost of bearing nuts & Bolts painting etc and shall be suitable for operation as per data given below. (1set of 20 HP)
Location of site:- The site is located at a distance of 10Kms from Nurpur railways station.
The altitude of place in which:-Altitude of place is 500 metres above mean Sea Level. The motor is intended to work:-
Type of Current :- AC three phase supply with frequency of 50 cycles per second.
Rated voltage :-415Vvolts (+/-) 10% treated
Charastristics of water :- a) Temperature 20oC (f) PH 7 to 8
b) Turbidity upto 10 NTU (g) Total solids __ Mg/Litre
d) Hardness = -- Mg/Litre(as CaCO3)
Depth of Well Assembly :-meters. B.G.L
L.W.L in Jack Well :- Metres
Maximum draw down level:- Metres
Centre line of pump :- Metres
Discharge level of hightest point:- Metres
Nos. of pumps required.:-2 No.Pump
Capacity :-13.50 L.P.S
Total head in mts.:-171.3 Metres
Length of rising main :- 1405.00Metres
Dia of rising main :- 80mm dia GI pipe
No. of working hours per day :- 16.00 hours
Limits of pump operation :- (-) 15%( +)10% of total head
H.P of Motor Drive unit:-Required 40 H.P of Pump at (+)10% and (-) 15 % of Total head .
BHP with follwing margins/ multiplying factor at duty points whichever is higher
Upto 2 Hp = 1.5 (d) 10 to20 HP=1.2
2 to 5 HP =1.4 (e) 20 to 100 HP= 1.15
2 to 10 H.P. =1.3 (f) above 100 HP= 1.10
Total run :- 8 hours continueously for 7 days.
Errection of Sr.No. 1 i/c cost of tees bends tapers and any other fittings required as per the site condition & as per the direction of the Engineer in Charge .
Providing and Fixing of PVC flat water proof submersible cable as per the BIS part 1-1988 latest with upto date ammendmends suitable for pumpset i/c connection complete at site of work as per the direction and satisfaction of the Engineer in Charge .Motor side 16mm Sq of 3 core submersible cable of Finolex /Plaza make complete in all respect to the entire satisfaction of the Engineer in Charge .
Providing and Fixing of main switch of 63 amp of requted make ISI marked in all leads and lifts.
Providing and fixing of copper cable 4.00 Sq^mm thre core starter to motor complete with fitting and testing at site complete within all leads and lifts.
Providing and Fixing of Cast steel Sluice Valve of 65mm dia heavy duty PN-1.0 of Kirloskar make including cost of nuts , bolts rubber sheet 4mm thick entire carriage with GI pipe of duly IS maked as per IS :14846-2000 latest with upto date ammendments.The normal seat pressure 10Kg/Cm2 complete in all respect leads and lifts as per the direction of Engineer in Charge.
Providing and Fixing of Kit kat 300 Amp type of superior quality completein all respect as per direction of the Engineer in Charge.
ShriBalajiEnginearingWorks (BID ID -510654)
SUBASH CHAND (BID ID -509046)
SS ENGINEERING WORKS (BID ID -510648)
KULDEEP DOGRA (BID ID -508500)
ARADHYA ELECTRICAL WORKS (BID ID -509068)
Aman Deep (BID ID -509006)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .