Dam safety-Overhauling and painting of canal sluice shutter and providing new ladder for the sluice well in Meenkara Dam in Palakkad district

Amount

Maintenanance of Sluice shutter.

od52179/2019_2020/MH : Erection of Emergency shutter manually after cleaning and greasing the rollers and operating mechanism for taking out the Canal Sluice shutter for painting and maintenance works, including all materials, labour charges etc. complete.

od52180/2019_2020/MH : Taking out the existing canal sluice shutter from the groove after dismantling it and dismantling the existing screw rod ,extension channel etc. including cost of all materials, labour charges, hire charges etc. complete.

od52181/2019_2020/MH : Dismantling the thrust roller assembly of the canal sluice shutter for overhauling including cost of all materials, labour charges, energy charges etc. complete.

od52182/2019_2020/MH : Reconditioning the screw rod including bent checking, straightening, clearing the threads in lathe etc including cost of all materials, labour charges,hire charges, energy charges, conveyance etc. complete.

od52240/2019_2020/MH : Dismantling of old rubber seals ,seal clamps etc including labour charges ,tools etc. complete

od52231/2019_2020/MH : Overhauling and assembling the roller wheel including the cost of labour,materials like bearing grease,O' ring,water seals ,bolts and nuts etc complete

Providing new Ladder

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.103 : Supply of MS checquered plates including cost of conveyance charges

od52184/2019_2020/MH : Supply of 32mm GI pipe

od52202/2019_2020/MH : Fabrication of MS materials in structural steel confirming to IS2062Gr c as per approved specifications, and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges and allied works etc complete but excluding material already supplied

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Replacing corroded plates and sections, painting of existing sluice shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od52202/2019_2020/MH : Fabrication of MS materials in structural steel confirming to IS2062Gr c as per approved specifications, and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges and allied works etc complete but excluding material already supplied

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Erection of ladder, sluice shutter, extension channel

od52219/2019_2020/MH : Erection of Canal Sluice shutter, extension channel, operating platform and other accessories in proper places. Including cost of all hire charges, materials, labour charges and trial run etc. complete.

85.117 : Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

od52235/2019_2020/MH : Supply of Roller bearing NU 220 (SKF/FAG) including cost of bearing , conveyance etc. complete.

od52236/2019_2020/MH : Supply of SS eccentric shaft, includes cost of shaft, conveyance etc. complete.

od52237/2019_2020/MH : Lifting of emergency shutter after erecting the canal sluice shutter and conducting satisfactory trial run as per the direction of departmental officers including cost of materials, labour charges ,hire charges etc. complete.

ASHIFUL HAK.C

Bidder Name

ASHIFUL HAK.C

SAI ENGINEERING