C/O Vety Dispensary Building at Katli Teshil Pachhad Distt. Sirmour H.P (SH C/O Building portion Civil worksincluding WSSI, Development of site (C/O R/wall AND B/wall) ,C/O Septik Tank, Rain Harvesting tank, and Sock pit)

Amount

Excavation in foundation trenches etc. in earth work in all heights, depths and in all kinds of soils including saturated soils comprisng of pick work jumper work, blasting work both in soft and hard rock, chisselling/wedging out of rock (where blasting is prohibted)and their intermediate classification with in all leads and lifts, stacking the excavated soil not more than 3 (Three) meters clear from the edge of excavation and then returning the stacked soil in 15Cm(Fifteen centimetre) layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads lifts.and carriage of material as per the direction of the Engineer Incharge.

Excavation in drains and channels etc. in all kinds of earth work including spade work, pick work, jumper work, blasting work and chiselling/wedging out of rock etc. including dressing of sides and bed and disposing of excavated earth upto all leads and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge within all leads and lifts including clearing of jungle. as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Earth work in excavations for structure as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per drawing and technical specification 305.1

Earth work in excavations for structure as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per drawing and technical specification 305.1

Filling in plinth with sand under floor including watering,ramming, consolidating and dressing complete ,including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Providing form work with steel plates 3.15 mm. ( Three point fifteen milimetre) thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuttering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs (Four metre) and removal of the same for in situ reinforced concrete and plain concrete work including all leads, lifts and carriage of materials, as per entire satisfaction of Engieer-in-charge.Flat surfaces such as soffits of suspended floors, roofs, landing and the like Floors etc. upto 200mm. ( Two hundred milimetre) In thickness.

Providing form work with steel plates 3.15 mm. ( Three point fifteen milimetre) thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuttering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs (Four metre) and removal of the same for in situ reinforced concrete and plain concrete work including all leads, lifts and carriage of materials, as per entire satisfaction of Engieer-in-chargeBeams, cantilever , girders and lintels.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtr. ( One metre) In depth in all heights from floor.

Providing form work with steel plates 3.15mm ( Three decimal one five milimeter )thick welded with angle iron in frames 30x30x5mm( Thirty into thirty into five milimeters ),so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00 meters ( four meters ) & removal of the same for in-situ reinforced concrete and plain concrete work .Vertical surface such as walls (Any thickness) partitons and like i/c attached pillasters ,buttresses ,Plinth and string corase and the like.

Providing form work with steel plates 3.15 mm. ( Three point fifteen milimetre) thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuttering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs (Four metre) and removal of the same for in situ reinforced concrete and plain concrete work including all leads, lifts and carriage of materials, as per entire satisfaction of Engieer-in-chargeEdge of slabs and breaks in floors and walls.

Providing and laying cement concrete 1:6:12 [1 cement:6 sand;12 graded stone aggregate 40 mm nominal size] and curing complete excluding cost of form work in Foundation and plinth Including all leads lifts and carriage of materials, as per the direction of Engineer-Incharge.

Providing and laying Damp proof corse 50mm (fifty milimetre) thick with C.C 1:2:4 (one cement :2 two Sand: 4 stone aggregate 20mm nominal size) and curing complete in all leads,lifts and other incidental charges.

Applying a coat of hot bitumen (mexphelt 80/100or equivalent ) using 1.70kg (one point seventy kilogram) per sqm damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosine oil in all leads,lifts and other incidental charges.

Providing and laying cement concrete 1:4:8 [1 cement:4 sand;8 graded stone aggregate 40 mm(forty milimetre) nominal size] and curing complete excluding cost of form work and reinforcement for concrete work in in Foundation and plinth Including all leads lifts and carriage of materials, as per the direction of Engineer-Incharge.

Providing and laying cement concrete 1:4:8 [1 cement:4 sand;8 graded stone aggregate 40 mm (forty milimetre) nominal size] and curing complete excluding cost of form work and reinforcement for concrete work in in Foundation and plinth Including all leads lifts and carriage of materials, as per the direction of Engineer-Incharge.

Providing and laying cement concrete 1:2:4 One cement : two sand : Four graded crushed hard stone aggregate 20 (Twenty) millimeters nominal size] mechanically mixed, vibrated and curing complete, including centring and shuttring excluding cost of reinforcement for reinforced concrete in Suspended floors, roofs, shelves and their supports, balconies, beams, beam girders and bressumers and cantilevers upto all floors, heights and levels Including all leads lifts and carriage of materials, as per the direction of Engineer-Incharge.

Providing and laying cement concrete work mechnically mixed and vibrated 1 : 1.5 : 3 ( One cement : one & half approved sand : three graded crushed stone aggregate 20mm ( twenty milimeters ) nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Wall (any thickness but not less then 0.1 mtr thickness) attached Pilasters ,buttresses ,Plinth and string courses etc. from top of foundation level upto floor to two level.Including all leads lifts and carriage of materials, as per the direction of Engineer-Incharge.

Providing and laying cement concrete work mechnically mixed and vibrated 1 : 1.5 : 3 ( One cement : one & half approved sand : three graded crushed stone aggregate 20mm ( twenty milimeters ) nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended floors ,roofs ,landing ,Shelf and their support balconies ,beams ,girders ,bressumers and cantilevers upto floor two level .Including all leads lifts and carriage of materials, as per the direction of Engineer-Incharge.

40 mm ( Forty milimeters )cement concrete flooring 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm ( Twenty milimeters ) nominal size ) laid in one layer finished with a floating coat of neat cement .Including all leads lifts and carriage of materials, as per the direction of Engineer-Incharge.

Providing tor steel reinforcement for reinforced cement concrete work including bending,binding and placing in position including cost of binding wire complete as per structural drawing and direction of Engineer-in-Charge as per HPPWD specification 1990-Volume-I,including carriage of all labour,equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges.

Brick work second class using common burnt clay building bricks in Foundation and plinth level in cement mortar 1:6 ( One cement : Six approved sand ) as per HPPWD specification 1990 voume-I including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Brick work second class using common burnt clay building bricks in Super-structure above plinth upto all floor level in cement mortar 1:6 ( One cement : Six approved sand ) as per HPPWD specification 1990 voume-I including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Second class Brick Masonry in common burnt clay building bricks in cment mortar 1:4 (1 cement :4 sand) Second class brick in foundation and plinth in all depth and levelas per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads, lifts and other incidental charges.

Half brick masonry using second common burnt clay building bricks in cement mortar 1:4 ( One cement : four approved sand ) Second class bricks as per HPPWD specification 1990 voume-I including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Brick Masonry in common burnt clay building bricks in cment mortar 1:4 (1 cement :4 sand) Second class brick in foundation and plinth in all depth and levelincluding carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Stone soling properly hand packed tightly under floor as per as per HPPWD specification 1990 voume-I including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Squared Rubble masonry coursed with hard stone of approved quality in foundation and plinth including rkaing out joints in cement mortar 1:4 ( one cement : four sand)including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Random rubble masnory/ polygon rubble masnory (Uncoursed brought to coureses) with hard stone of approved quaility in foundation and plinth levelling up with cement concrete 1:6:12[One cement : Six sand : Twelve graded crushed hard stone aggregate 20 (Forty) millimeters nominal size] at plinth level in cement mortar 1:6(One cement and six sand), as per H.P.PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing high pressure PVC spigot and socket ,waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia. including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PVC cowl including carriage of materials 100 mm (one hundred fifty milimetres ) nominal size including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.2nd classdeodar wood.including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing pannell glazed Doors or Pannelled and glazed shutters for door window and clerstory windows including black enemelled iron but hinges wirth necessary screwes 40mm thick 2nd Class deodar wood..including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing wire gauge shutters using galvanized mild steel wire gauge of I.S. gauge designation 85 G (Eighty Five G) with wire of dia 0.56 (Zero point Five Six) millimeters for door, windows and clear story windows including bright finished black enameled iron hinges with necessary screws 30 mm. (thirty millimeter) thick second class deodar wood as per HP.PWD specification 1990 (One thousand nine hundred ninety)volume- I,(one) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing 40X3 mm flat iron hold fast 40cm long including fixing to frame with 10mmm diameter bolts and nuts and wooden plugs and embedding in cement concrete block 30X10X15 cm 1:3:6 (1 cement:3sand :6 graded stone aggregate )20mm nominal sizencluding carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing 19 (nineteen) milimetres thick commercial board water proof shutters for cup board with hard wood edging on exposed surface including fixing with nickel plated paino hinges wirh screws complete as per HP.PWD specification 1990 (One thousand nine hundred ninety)volume- I,(one) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 1.00 mm thick coloured or plain lamination sheet (Sunmica) on board/ply wood sheets wirh approved adhesive and nails etc completencluding carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws atc. Complete 300 x 16mm ( Three hundred into sixteen milimetre).including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws atc. Complete 250 x 16mm ( two hundred fifty into sixteen milimetre).including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge.

Providing and fixing anodized aluminum Tower Bolts (barrel type) anodized transparent or dyed to required shade and color with screws etc. millimeters size Complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.250 x 10 (Two hundred Fifty into Ten)

Providing and fixing anodized aluminum Tower Bolts (barrel type) anodized transparent or dyed to required shade and color with screws etc. millimeters size Complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.150 x 10 (onehundred Fifty into Ten)

Providing and fixing aluminium handles anodized transparant or dyed to required shade and colour with screws etc., completeas per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.125mm.(one hundred twenty five milimetres)

Providing and fixing aluminium handles anodized transparant or dyed to required shade and colour with screws etc., completeas per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges100mm.( hundred milimetres)

Providing and fixing M.s. grill of required pattern in wooden frames of windows frames etc. with M.S. lats square on round bars with round headed bolts and nuts or by screws plain grill including carriage of materials in all leads, lifts and other incidental charges.

Providing and fixing anodized aluminum fan light piviot with necessary screwes including carriage of materials in all leads, lifts and other incidental charges.

Providing fixing MS BP sheet 1.66mm to 2mm thick in eaves board / facia/ soffit / ceiling including cutting fixing and welding to steel roof members and applying a coat red primer complete as per the instruction of engineer in charge (base member of steel work shall be measered and paid separately

Providing and fixing 0.60 mm (Zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified pollyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm dia meter with prepaintede limipet and rubber washers complete with all accessories as HPPWD Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing ridges or hips 60 cm overall with 0.60 mm (Zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified pollyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns primer coating including fixing with prepainted iron J or L hooks , bolts and nuts 6mm dia meter with prepaintede limipet and rubber washers complete with all accessories as HPPWD Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint completer in all respect. In gratings framed gaurds bats ladders , railing brckets and similar works as per structural design, drawing ,direction of the Engineer-in-Charge and as per HP.PWD. Specification 1990 (One thousand nine hundred ninety)volume- I,(one) including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint completer in all respect. In trusses and trussed purlins in buildings as per structural design, drawing ,direction of the Engineer-in-Charge and as per HP.PWD. Specification 1990 (One thousand nine hundred ninety)volume- I,(one) including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face 100 mm (one hundred mm dia )PVC ( D-plast) rain water pipe of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive complete as per HP. PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face PVC ( D-plast) accessories i.e PVC plain bend 100 mm (one hundred mm dia) for rain water pipe including filling the joints with approved adhesive complete sas per HP. PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S. holders bat clamps of approved design to CI or SCI pipes embedded in and including cement concrete blocks 10X10X10cm(Ten into ten into ten centimeter) of 1:2:4 (:One cement: two sand:4 four graded stone aggregate 20mm nominal size) cost of cutting holes and making good the walls etc 100mm (One hundred millimeter) diameter of CI pipes including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads, lifts and other incidental charges.

Kota stone slab flooring 20 (Twenty) millimeters (Average) thick base of cement mortor 1:4 (One cement isto Four Sand) laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab including rubbing and polishing complete. 40 (forty) millimeters thick, as per HP.PWD specification 1990 (One thousand nine hundred ninety)volume- I,(one) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying granite stone flooring 20 (Twenty) millimeters (Average) thick base of cement mortor 1:3 (One cement isto three Sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 20 (twenty) millimeters thick, as per HP.PWD specification 1990 (One thousand nine hundred ninety)volume- I,(one) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying 20 (Twenty) millimeters acid proof tile of size upto 300 X300 mm of specified shad in floors , treads of steps and landing laid on bead of 20mm thick of cement mortor 1:3 (One cement isto three Sand) jointing with cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. , as per HP.PWD specification 1990 (One thousand nine hundred ninety)volume- I,(one) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing White glazed tiles 6 mm thick in flooring, tread of steps and landing laid on bed of 12 mm thick cement mortar 1:3 (1 cement :3 sand) finished with flush pointing in white cement including carriage of all labour equipment and materials to various locations through all modes of transportation in all leads, lifts and other incidental charges.

Providing and fixing angle iron cupboard frame manufacture of mS angle iron section of 25X25X5mm thick including hinges jambs, lock beed and of required threshold of mild steel angle 25X25 mm balded or rigidly fixed iny machanical means lugs with split in details to each jambs including steel butt hinges 2.5mm thick with provision for locking arrangement and shock observer as specified and applying a caot of approved steel primer after pre tretment of the surface as per direction by engineer in charge

Providing and fixing 15 cm wide 45 cm over all semicercular plain G.I sheet gutter with iron brackets 40X 3 mm size bolts and nuts and washers etc. including making necessary connection with main water pipe as per design and entire satisfaction of the Engineer-in-Charge.

15mm cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth in cement mortar 1:6 ( One cement : six sand ) as per HPPWD specification 1990 voume-I including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm cement plaster in single coat on the fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth in cement mortar 1:6 ( One cement : six sand ) as per HPPWD specification 1990 voume-I including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

6mm cement plaster to celling in cement mortar 1:3 (1cement: 3sand) all labour, equipment and materials to various location though all modes of transportation in all leads, lifts and other incidental charges.

15 mm cement plaster in single coat on rough side of brick /concrete stone walls for interior plastering upto floor two level including arrises , internal rounded anfgles ,chamfers and /or rounded angles not exceeding 80 mm in girth and finished even and smooth. (1 cement : 5 sand)

20 mm (twenty milimeter ) cement plaster in two coats backing coat 10mm (ten milimeter) and finishing coat 10mm (ten milimeter) thick one one fair side of brick / stone masonry walls for interior plastering upto floor two level including arrises internal rounded angles chamfers and or rounded anfles cement mortaras per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads, lifts and other incidental charges.

Providing and fixing plain asbestos cement sheet ceiling of approved quality with but jointing and wood screws 6mm thick (six milimeter) all labour, equipment and materials to various location though all modes of transportation in all leads, lifts and other incidental charges.

Painting two coats excluding priming coat on new steel and other metal surface with enamel paints other then white brushing for use on floor to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping with white enamel paint other than white as per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various location though all modes of transportation in all leads, lifts and other incidental charges.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign sand papering and knotting Readymixed paint brushing wood primer pink including carriage of all labour equipment and materials to various locations through all modes of transportation in all leads, lifts and other incidental charges.

Painting two coats (excluding priming coat)on new wood and wood based surface with enamel paints to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping with white enamel paint other than white as per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various location though all modes of transportation in all leads, lifts and other incidental charges.

Applying priming coat with ready mixed paint brushing with primer pink over new concrete / masonry / AC sheet after and including preparing the surface by throughly cleaning oil , grease , dirt and other forigen matter sand papering and knotting as per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various location though all modes of transportation in all leads, lifts and other incidental charges.

Painting two coats with enemal paint other then white (excluding priming coat) on new concrete / masonry / AC sheet with ready mixed paint, brushing to give an even shade and including preparing the surface by throughly cleaning oil , grease , dirt and other forigen matter sand papering and knotting as per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various location though all modes of transportation in all leads, lifts and other incidental charges.

White washing with lime on un-decorated ceiling and or slopping roof surface two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Distempering ( two coats ) with oil bound Nerolac or its equivalent washable distemper of approved brand & manufacture & of required shade on un-decorated wall surfaces to give an even shade over & including a priming coat with distemper primer of approved brand & manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matter & also including preparing the surface even & sand papered smooth. Priming coat with distemper primer as per HPPWD specification 1990 voume-I including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Finishing wall with water proofing cement paint of approved brand and manufactur of required shade of decorated wall surface (one coats ) to give an even shade and final finish after thoroughly brushing the surface to remove all dirt, loose or softened joint as per HP.PWD. Specification 1990 (One thousand nine hundred ninety)volume- I,(one) including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing plinth protection 50mm thick in Cement Concrete 1:3:6 ( One Cement : Three sand : Six graded stone aggregate 20mm nominal size) including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Providing under layer for plinth protection of 75mm thick ( Un-consolidated) bed dry brick/ stone aggregated 40mm nominal size) wall rammed and consolidated and grouted with fine sand including preparation of ground. including all leads,lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge.

Constructing course rubble hammer dressed " U" shape open surface drain with side wall 15 x 22 cm (fifteen into twenty two centimetres) in cement mortar 1:6 (One cement : six sand ) & inside plastering with cement plaster 1:3 ( One cement : three sand ) including earth work & laying 10cm (ten centimetres) cement concrete in 1:5:10 (One cement : five sand :ten graded stone aggregate 40mm (forty milimetres) nominal size ) & 7.5 cm (seven point five centimetres) cement concrete 1:2:4 ( One cement : two sand : four graded stone aggregate of 20mm (twenty milimetres) nominal size ) & finished with a floating coat of neat cement complete as per standard design as per HPPWD specification 1990 voume-I including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing to wall,ceiling and floor 15mm (fifteen milimeter)nominal bore galavanized mild steel tube (Medium grade) with ISI marked tube fitting and clamps including making good the wall and ceiling and floor as per HPPWD specification including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and laying in trenches GMS tube 15mm (fifteen milimeter)nominal bore galavanized mild steel tube (Medium grade) with ISI marked tube fitting and clamps including making good the wall and ceiling and floor as per HPPWD specification including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and laying in trenches 15mm (fifteen milimeter)nominal bore galavanized mild steel tube (Medium grade)tube fittings (earth work in trenches to be measured and paid separatly) as per HPPWD specification including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

making connection of galvanized steel distribution branch with galavanized mild steel main line 20mm to 40 mm (twenty milimeter to forty milimeter)nominal bore ISI marked by providing and fixing tees including cutting and thredhing the pipe complete as per HPPWD specification including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Fixing water meter and stop cock in 15mm (fifteen milimeter)nominal bore galvanized steel tube including necessary fitting such as mils steel galavanized jam, nuts , sockets etc. cutting and making long screwes complete ( water meter and stop cock to be measured and paid separatly) as per HPPWD specification including carriage of all labour equipement and material to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC water storage tank of ISI 12701 marked,G.I. inlet & outlet connection, 15mm nominal bore ball valve & mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level 2000 litre net capacity tank

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc.110 mm dia

Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110X90mm

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.100 mm dia

Providing & fixing Vitreous China wash basin with single hole for pillar tap with C.I. or M.S.brackets painted white including cutting holes & making good the same but excluding fitting flat back white shade No. 10001 of size 630 x 450mm with pedestal of Hindware or its equivelent.including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous china laboratory sink with C.I. Or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings :- 600mm x 450mm x 150mm ( six hundred into four hundred fifty into one hundred fifty milimetre) .including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F C.P. brass chain 50 cm (fifty centimetre)long and rubber plug of size 32 mm ( thirty two milimetre) dia for wash basin or sink including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F C.P. brass waste for wash basin or sink including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

P/F M.I. Union for wash basin or sink 32mm (thirty two milimetre) dia including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing & fixing 100 mm ( one hundred milimetre) dia sand cast iron each grating for floor or nahani / gully / floor trap including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing & fixing 600mm x 450mm ( six hundred into four hundred fifty milimetre) bevelled edge mirrior of superior glass mounted on 6mm (Six Milimtre) thick A.C. sheet or plywood sheet & fixed to wooden plugs with C.P. brass screws & washers including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed steel screws and rawail plugs etc complete including carriage of materials within all leads and lifts :-600X200mm ( Six hundred into two hundred milimere)

Providing & fixing Chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing CP brass pillar tap with capstan head (heavy duty ISI marked including carriage of materials within all leads and lifts :-15 mm (fifteen milimetre) including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing C.P.brass stop cock 15 mm (fifteen milimetre) (heavy duty ISI marked including carriage of materials within all leads and lifts :-including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing & fixing Vitreous China wash down water closet size 58 x 44 centimetre ( Fifty eight into forty four ) ( Orrisa pattern ) Orrisa Pan W.C. No. 2071 size 58 x 44 centimetre in white shade of Cera or its equivelent in General Toilets ( Earth work, bed concrete,foot rest & trap to be measured & paid for separately ) as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 100 mm ( one hundred milimetre) size 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and soil pipe in cement mortar 1:1 (viturous china)including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing high level C.I 10.00/12.50 ltr.capacity flushing cistern with a pair of CI or mild steel brackets, complete with fittings such as syphonic arangement including carriage of materials within all leads and lifts

Providing and fixing brass full way valve 15mm (fifteen milimete) nominal size with wheel including carriage of materials within all leads and lifts :- including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building brick in cement mortar 1:5 (One cement : Five Sand) C.I. cover with frame (light duty) 355mmx610mm. (Three hundred fifty five into Six hundred ten milimetre) internal diamensions total weight of cover with frame to be not less than 38 kg ( Thirty eight Kilograme) (weight of cover 23 Kg Twenty Three Kilograme) and weight of frame 15 Kg ( fifteen kilograme) RCC top slab with 1:2 :4( One cement : Two sand : Four Graded stone aggregate 20mm ( Twenty milimetre) nominal size) foundation concrete 1:5:10 ( One cement : Five sand : Ten graded stone aggegate 40mm (forty milimetre) nominal size ) inside plastering 15 mm ( fifteen milimetre) thick with cement mortar 1:3 ( 1 cement : 3 sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete, inside dimensions 455mmx610mm ( Four hundred fifty five milimetre into Six hundred ten milimetre) deep single pipe line.including of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge

Constructing manhole with R.C.C. top slab in 1:2:4 mix ( One cement : two sand : four graded stone aggregate 20mm nominal size ) foundation concrete 1:4:8 ( one cement : four sand : eight graded stone aggregate 40mm nominal size ) inside plastering 15mm ( fifteen milimetre) thick with cement mortar 1:3 ( one cement : three sand )finished with a floating coat of neat cement & making channels in concrete 1:2:4 mix ( one cement : two sand:four graded stone aggregate 20mm nominal size )finished smooth complete including curing & testing inside size 800x800x500mm ( eight hundred milimetre into eight hundred milimetre into five hundred milimetre) deep including C.I. cover with frame ( Light duty single seal pattern ) 455mm x 610mm ( four hundred fifty five into six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 Kg ( thirty eight kilogramme) (Weight of cover 23Kg ( twenty three kilogramme and weight of frame 15 Kg ( fifteen kilogramme) with 200mm ( two hundred milimetre ) thick wall of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( one cement : three sand )with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) :- including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying cast iron cover without frame for manholes four frame of internal diamensions 455X610 mm ( four hundred fifty five into six hundred ten milimeter) Single ceat pattern-I the weight of cover to be not less than 23 kg (twenty three kilogramme)including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Supplying and fixing 300 mm X300 mm (three hundred into three hundred milimeter) cst iron cover with frame for gully trapas per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads, lifts and other incidental charges.

Providing and fixing G.I pipe outlay and inlet connected with rain water pipe s per drawing completeas per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads, lifts and other incidental charges.

Supplying and stacking broken/ crushed stone aggregate chipping of hard stone of 10mm (forty milimeter) sizeas per HP.PWD. specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads, lifts and other incidental charges.

Supplying and stacking 25 mm ( twenty five milimetre) stone aggregate as per site as per the direction of Engineer-in -charge and as per HPPWD specification 1990 volume-I including carriage of alllabour equipment and material to various locations through all modes of transportation in all leads and lifts , including all incidental charges.

Supplying and stacking 12 mm ( twelve milimetre) stone aggregate as per site as per the direction of Engineer-in -charge and as per HPPWD specification 1990 volume-I including carriage of alllabour equipment and material to various locations through all modes of transportation in all leads and lifts , including all incidental charges.

Boulder filling dry hand packed in soak pit as per the direction of Engineer -in-charge and as per HPPWD Specification 1990 volumme-I including carriage of alllabour equipment and material to various locations through all modes of transportation in all leads and lifts , including all incidental charges.

Providing weapholes in brick masonry / stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100 mm ( one hundred milimetre) dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7including carriage of alllabour equipment and material to various locations through all modes of transportation in all leads and lifts , including all incidental charges.

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 in granular material.including carriage of alllabour equipment and material to various locations through all modes of transportation in all leads and lifts , including all incidental charges.

V2N CONSTRUCTION

ADITYA BHANDARI