RURBAN- WSS to Mangattidam Zone III in Mangattidam Panchayath

Amount

Appendix - C Sump cum pumphouse - Cost of pipes and specials

Supplying 200mm flanged pipe for inlet and outlet

Supplying 250mm flanged pipe for overflow

Supplying 150mm flanged pipe for scour

Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 80mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 80mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 200mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 150mm.

Appendix -F Construction of 4.5LL capacity OHSR - Cost of Pipes and Specials

Supplying 200mm flanged pipe for inlet and outlet

Supplying 300mm dia flanged pipe for outlet

Supplying 400mm dia flanged pipe for outlet

Supplying 250mm flanged pipe for overflow

Supplying 150mm flanged pipe for scour

Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 100mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 150mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 200mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 400mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 300mm.

Appendix -H Supply and Erection of Pumpset

Supply of reputed make brand new electrically driven centrifugal pumpset conforming to relevant IS to pump water against the following duty conditions with all required accessories like priming arrangement, foot valve, required length of suction pipe etc. required for the pump. The pumpsets shall be coupled with the motor Synchronous speed - 960 to 1500 rpm, Impeller - Bronze LT B2, Shaft -SS316, Casing - Cast Iron Neck ring -Bronze LT B2, Sleeve - SS410 Delivery Head including frictional loss 65m Discharge -21 lps, Pumping Main - 200mm dia DI K9 Pipe, Length : 1150m Reputed make brand new best quality 3 phase 415V 50Hz AC copper wound high efficiency screen protected Drip Proof, solid shaft squirrel cage EF2 induction motor conforming to suitable IS with non reversible ratchet arrangement and accessory coupling arrangements, suitable in all respect to be coupled with and drive pump set suitable starter Wall mounting MS fabricated electrical pannel board, Main switch volt meter ammeter , single phasing preventer, dry run preventer, capacitor, indicating lamps with separate fuse switch, common main switch, change over switch, sluice valve, reflux valve, pressure guage, insulated copper, 3 phase wiring, earthing, MS specials, erection of pumpset , motor valves, pannel board, energy meter meter board satisfying KSEB and Electrical installations as IE rules including civil works for fitting erecting pipes , connection and delivery main, thick rubber mat etc. complete , 2 years maintenance including all interconnection and fabrication work as per the site condition and direction of the Departmental officer

Supply of 200 mm Mechanical flowmeter with all accessories including dust guard

Appendiix-J: GM fromKambani kunnu to sump at Mangattidam-Cost of pipes

Supply of DI K9 Pipe Conforming to IS 8329/2000, 200mm Dia.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 200mm.

Supply of 200 mm Mechanical flowmeter with all accessories including dust guard

Appendiix-M: PM from sump at Mangattidam to OHSR-Cost of pipes

Supply of DI K9 Pipe Conforming to IS 8329/2000, 200mm Dia.

Supply of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.0, Size 200mm.

Supply of CI Air Valve with Flanges, Conforming to IS 14845 - 2000, Kinetic Air Valve Type DS1, Size 80mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 80mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 100mm.

Bidder Name

Amount

REGHU N

YOUNUS P M

REGHU N

REGHU N