CERTAIN REPAIRS TO STORM WATER DRAINS, ASSOCIATED WORKS AT AGE B/R RAMGARH

Amount

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises.

Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per serial item No 2.00 above but except brick complete all specified and directed.

Material and labour for rendering 15mm thick on fair faces of concrete surfaces in CM (1:4) using WPC @ 3% by weight of cement. Note : WPC shall be measured and paid separately.

Supply only water proofing compound conforming to IS-2645 1975.

Demolition Cement Concrete of any description and in any position complete all as specified and directed.

Material and labour for PCC type 1:3:6 type B1 20 mm gradded aggregate as in surface channels and drains complete all as specified and directed.

Material and labour for PCC (1:2:4) type B0 using 20 mm graded agg as in coping, Kerb stone, mud stop etc inclduing necessary form work

Material and labour for PCC (1:2:4)) type B1 using 40 mm graded agg as in benching etc.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends.

All as per serial item No 9.00 above and add or deduct for each 25mm girth or part thereof over or under 30 cm

Demolition of reinforced cement concrete slabs etc in ground floor and paving n.exc 15 cm thick (below or above ground level)

Material and labour for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slabs etc set in cement mortar (1:4) including use and waste of form work & placing on drains complete all as specified and directed

Material and labour for RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slabs etc set in cement mortar (1:4) including use and waste of form work & placing on drains complete all as specified and directed

Material and labour for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia conforming to Fe-410-S or Fe-410-O complete all as specified and directed.

All as per serial item No 14.00 above but 6mm to 8mm dia TMT bars

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in road cutting areas etc all as directed.

Material and labour for Reinforcement concrete pipes, class NP-2 laid and jointed complete with collars for 450 mm bore dia of pipe including dismantling

Material and labour 75mm thick CC type D-2 1:4:8 (40mm Agg) as in subbase.

Supply only sand for screed bed min 25mm thick for paving flooring

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over watering and consolidating complete . Note: sand will be measured separately.

Material and labour for PCC chequered tiles with grey cement and pigment 25cm X 25cm X 25mm thick set & jointed in neat cement slurry as in path, pavement ,floors, etc. over 15mm thick screed bed CM 1:6 all as specified and directed.

Material and labour for PCC floors/hard standing laid in bays type B-2 1:2:4 mix 100mm thick finished even and rough using XPM impression with concrete green including necessary formwork complete all as specefied and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2(using 40mm graded aggregate) as in plinth protection fixed even and smooth with out using extra cement

Material and labour for filleting work in CM 1:4 not exc 25 Sqcm

Taking out silt, gravel bounders, vegetation grass from complete chocked and blocked and fully filled up Nallah/ Culvert/drain of any description with revoming the silt rubbish to distance exc 150m but n.exc. 300m including taking off drain covers and re-fixing the same after cleaning all as specified and directed.

Taking down cement plaster of any description racking out joints hacking for key scrubbing down with water etc to receive plaster complete all as specified and directed.

Preparation of new plastered surface and applying two coats of cement base paint over a coat of white wash etc complete all as specified and directed.

Dismantling of brickwork or stone/boulder mansonry, built in lime mortar incl all quoins, arches, pillars, etc but excl ashlar facings, dressed stonework and precast concrete articles.

Material and labour for stone boulder pitching grouted in cm 1:6 including surface dressing if required complete all as specified and directed.

All as per serial item no 29.00 above but except stones

Material and labour for boulder filling dry, hand packed tightly, as in wire crate apron bunds(wire crate measured separately) etc complete all as specified and directed by Engr-in-Charge

All as per serial item No 30.00 above but except stone.

Supply and fixing for 4mm dia galvanised steel wire 225 x 150mm mesh, made up into mattresses or cages, lapped, wired and laid in position including closding after filling complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc

Supply and fixing for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete

Site clearance incl removing of vegetation growth, bushes including taking out from fencings etc and removing the rubbish n exc 250m as directed by Engr-in-charge. (measurement shall be taken of ground area cleaned) all as specified.

Material and labour for two coat of synethic enamal painting to steel surfaces including one coat of red oxide primer on steel surfaces any descrtiption over 10 cm in width or girth not otherwise described incl preparation of new surfaces.

Material and labour for one coat of synethic enamal painting to steel surfaces any descrtiption over 10 cm in width or girth not otherwise described incl preparation of old surfaces.

GOODWILL ENGINEERS

D.N.Gupta and Sons

M/s Krishan Aggarwal