NIT No. 06 Item No.3 (2024-25)

Supply of 10HP,1450RPM motor & SP4L+ type self priming pump of bare shaft of size 100x100mm horizontal foot mounted with suitable coupling, coupling guard and M.S base frame for the above said pump & motor as per requirement. Make of Pump-M&P Willo/Kirloskar/Jyoti/ DJB Approved

Make of motor-Kirloskar/ABB/Crompton/Jyoti/DJB Approved Supply of 4 core, 25mm sq aluminum conductor, PVC insulated armored cable 1.1KV confirming to IS:1554 (Part-I) 1988/7098. Make of Cable-Grandlay/Gloster/Universal/ICL/ICC/Havells

S I T C of modular/ combinable polycarbonate insulated outdoor type housing shock proof, weather proof, rust proof, UV resistant, Halogen free, silicone free, corrosion proof, protection class: II safe, IP 65 according to IEC 61 439-2, IEC 60 999, DIN EN 50 262, DIN 43 880, IEC 60 529/ DIN VDE 0470 Teil 1, the DB should have ASTA certification by CPRI and manufacturer routine Test Certificate should be provided, totally insulated, having internal embedded gasket with provision of cable entry through glands. The panel board should have following control panel MCB and accessories etc. complete with connections & interconnections etc. as required. Note 1: For mounting of metering & outgoing MCBs only box with hinged door with triangle lid to be used. Note 2: For mounting of 10HP FASD Feeder pillar MS angle frame should be hot dipped galvanized and made out of MS angle of size 35 X 35 X 5 mm at the bottom as per site requirement. Note 3: All indicating lights and measuring instrument shall be protected by suitable MCBs. The Panel should consist of followings;- a) 32 A, FP, 10 kA, MCB - 1 No. b) 18 A, TP, power contactor - 3 Nos. c) Side mounting Aux. contact block -3 Nos d) 6 - 10 A over load relay - 1 No. e) Star delta electronic timer - 1 No. f) Single phasing preventor - 1 No. g) Illuminated Push Botton with element - 2 Nos. h) LED indicating light R, Y, B - 3 Nos. i) 6 A, 10 kA, SP MCB - 4 Nos. j) TP digital VAF + PF Cl 1 meter - 1 No. k) CT 30/ 5 A - 3 Nos. Make : L&T/Siemens/ DJB Approved

Supply of C.I foot valve of 100mm dia. Make of Valve-Kirloskar/IVC/DJB approved

Supply of M.S medium Class black pipe of 100mm dia. Make of pipe-Jindal/Tata/DJB approved

Supply of M.S Tee of size 100mm X 100mm dia.

Supply of 100 mm dia sluice valve, PN 1.0 Make : Kirloskar/IVC/ DJB approved make

Supply of M.S Bend of size 100mm X 100mm dia.

Supply of M.S Flange of 100mm dia.

Supply of Nut bolts & washers.

Supply of rubber packing sheet of good quality

Digging and laying work for PVC insulated power cable by digging of earth by manual labour up to the required depth, sand cushioning and protective covering of power cable in the trench etc & refilling the trenches after completion of laying work as per site requirement.

Digging and laying work for M.S pipe line by digging of earth by manual labour up to the required depth for M.S pipe laying from pump set and going parallel to the filter channel up to all scour chambers as per site requirement.

Making of brick foundation upto the suitable height to take water from suction side (Raw water Channel) for pump set. The size of foundation will be 1.25mtr X 1.5mtr X 2mtr approximately.

Making of RCC foundation at the top of brick foundation for fixing of M.S.Base frame of pump set with grouting of foundation bolts for Base Frame as per site requirement.

Fixing of electric panel by grouting with CC work. The job includes making foundation for panel as per the height required at site.

Installation charges of all above items including fixing of pump, motor, coupling, coupling guard, foot valve, sluice valve, welding of flanges with pipe, bend, tee’s etc., connecting of pipe line with bends, tee, sluice valve, foot valve etc. as per site requirement.

Fabrication & fixing of Fiber glass sheet shed on the scour pump & feeder pillar in order to protect the motor, pump & other equipment’s from rain to avoid these equipment’s getting rust and moisture. This includes supply of M.S. pipe of 40 mm dia up to the height of 96” so that they can be grouted in the ground with proper RCC work and making roof structure with the help of square M.S. pipe of size 25 mm so that fibre glass sheet can be fixed on the M.S. structure with the help of fasteners.

Primer and Painting of complete pipe line, sluice valve etc with black anticorrosive paint minimum two coats etc. as per site requirement.

Testing & commissioning of complete system on full load.

Premier Engineering Company

MK ENGG.CO.